Eiki Projector Lc Xb29n User Manual

61
Check the indicators for projector condition.  
• • • green.• • • red• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow. When this indicator
lights yellow, replace the projection lamp with a new one promptly. Reset the lamp replacement counter after
replacing the lamp. See pages 58-59.
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the POWER ON-OFF
button to turn on the projector....

62
Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
–Make sure you have properly connected the projector to peripheral equipment as described on pages 17–19. 
–Make sure all equipment is connected to AC outlet and the power is turned on.
–When the projector does not project an image from the connected computer, restart the computer.  
Problem:–Solutions
No power–Plug the power cord of the projector into the AC outlet.
–See if the...

63
Appendix
Some displays are not seen–Check the Display function. See page 46.
during  the operation.
PIN code dialog box appears–PIN code lock is being set. Enter a PIN code (the “1234” or numbers
at start-up.you have set). See pages 21, 52–53.
Computer 2 cannot be selected.–Select Computer 2 at the Terminal function.  (See page 49.) 
The Terminal function cannot –The Terminal function cannot be selected after Computer 2 is 
be selected.selected.  Select other input source such as Computer 1 or 
Video...

64
Appendix
Menu Tree
SVGA 1Mode 1Mode 2- - - -
Auto PC Adj.
Total dotsHorizontalVertical
Display area HDisplay area VReset
Dynamic
RealBlackboard (Green)Image 1Image 2Image 3
Image AdjustContrastBrightnessColor temp.
Red
Gamma
Store
Quit
NormalTrueWide
Digital zoom –
Full screen
0–630–63
Computer Input
PC Adjust
Mode 1Mode 2Mode 3Mode 4Mode 5
Image Select
High
0–63
0–15
Image 1Image 2Image 3Image 4
Screen
Quit
Yes/No
✽Systems displayed in the System Menu vary
depending on an input signal.
ResetYes/No...

65
Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
Dynamic
CinemaBlackboard (Green)Image 1Image 2Image 3
Quit
NormalWide
0–630–63
Off
Setting
Image Select
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
Gamma
Progressive
0–630–630–630–15 0–15
Image 1
Screen
Yes/No
Quit
Image 4
LanguageSetting16 languages provided.
On/OffOn/Countdown off/Off Logo select
On/OffOn/Off
Off
On/OffNormal/Auto/Eco
Code 1–Code 8...

66
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned
below and less than 140 MHz of Dot Clock for analog signal and 110 MHz of Dot Clock for digital signal.
When selecting these modes, PC adjustment can be limited.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(KHz)V-Freq.
(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x...

67
Appendix
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(KHz)V-Freq.
(Hz)
D-VGA640 x 48031.4759.94
D-480p640 x 48031.4759.88
D-575p768 x 57531.2550.00
D-SVGA800 x 60037.87960.32
D-WXGA 11366 x 76848.3660.00
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(KHz)V-Freq.
(Hz)
D-720p1280 x 72045.0060.00
D-1035i1920 x 1035
D-1080i1920 x 1080
D-1080i1920 x 1080
33.7560.00
(Interlace)
33.7560.00
(Interlace)
28.12550.00
(Interlace)
D-XGA1024 x 76843.36360.00
D-WXGA 21360 x 76847.760.00
D-WXGA 31376 x 76848.3660.00
When the input...

68
Appendix
Technical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 9.66 x 2.28 x.6.82 (294.5mm x 69.5mm x 208 mm) (Not including adjustable feet)
Net Weight 5.7 lbs (2.6 kg)
Feet Adjustment 0˚ to 10.0˚
Panel Resolution
LCD Panel System 0.63” TFT Active Matrix type, 3 panels 
Panel Resolution 1,024 x 768 dots
Number of Pixels 2,359,296 (1,024 x 768 x 3 panels)   
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
High...

69
Appendix
Model No.
COMPONENT-VGA Cable: AH-98771 
SCART-VGA Cable: AH-98881
USB Memory :WL-10
(This is used for Memory Viewer operation.)
USB Wireless LAN adapter:WL-30(This is used for Wireless LAN operation.)
The parts listed below are optionally available. When ordering those parts, specify the item name and Model
No. to the sales dealer.
Optional Parts
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
DVI-VGA Cable
USB Cable
Lens Cover with String...

70
Appendix
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified
conformance with PJLink Standard Class 1.
For PJ Link password, see page 49 on the owner’s manual “Network Set-up and Operation.”
Projector Input
RGB
Computer1 (Analog)
RGB (AV HDCP)
RGB (PC digital)
Component
RGB (Scart)
Auto
PJLink Input
RGB 2
RGB 1
DIGITAL 2
DIGITAL 1
RGB 3...