Eiki Projector Lc Xb29n User Manual

51
Setting
On start
Lamp control
Remote control
Remote control
Pointer
When this function is set to “On,” the projector will be
automatically turned on just by connecting the AC power
cord to a wall outlet.
✔Note:
•Be sure to turn off the projector properly (see “Turning Off the
Projector” on page 22). If the projector is turned off in the incorrect
sequence, the On start function does not work properly.
You can emphasize a part of the projected image with this
function. Use the Point 
edbuttons to...

52
Setting
Key lock
Key lockSecurity (Key lock and PIN code lock settings)
PIN code lock
PIN code lock
This function locks the top control and remote control
buttons to prevent operation by unauthorized persons.
...... Unlocked.
...... Lock the operation of the top control. To
unlock, use the remote control.
...... lock the operation of the remote control.
To unlock, use the top control.
If the top control accidentally becomes locked and you
do not have the remote control nearby or there is
something...

53
Setting
Change the PIN code lock setting
Use the Point 7 8buttons to
switch between the options.Use the Point 7 8buttons to select Off, On1, or On2 and
then move the pointer to “Quit” with the Point 
dbutton.
Press the SELECT button to close the dialog box.
Change the PIN code lock setting Enter a PIN code
Use the Point edbuttons to enter a number. Press the
Point 
8button to fix the number and move the red frame
pointer to the next box. The number changes to “✳.” If
you fixed an incorrect number, use...

54
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.22).
L1 ....... Normal operation
L2 ....... Slower and lower-sound than the normal operation
(L1), but it takes more time to cool the projector
down. Fan
Setting
Choose the running speed of cooling fans from the following
options.
Normal ..... Normal speed
Max .......... Faster than the normal speed.Fan control
Fan
Warning log
This function records anomalous operations while the
projector is...

55
Setting
Factory default
This function returns all setting values except for the user
logo, PIN code lock, Logo PIN code lock, lamp counter, and
filter counter to the factory default settings.
Exit the Setting Menu.
QuitSelect Factory default and this
box appears. Select [Yes], and
the next box appears. 
Select [Yes] to
activate it.
Factory default
This function is used to set a frequency for the filter cleaning.
When the projector reached a specified time between
cleanings, a Filter warning icon...

56
The WARNING indicator shows the state of the function which protects the projector. Check the state of the
WARNING indicator and the POWER indicator to take proper maintenance. 
Wa rn ing Indicator
The projector is shut down and the WARNING
indicator is blinking red.
When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down
to protect the inside of the projector. The POWER indicator
is blinking while the projector is being cooled down. When
the...

57
Maintenance and Cleaning
Turn off the projector, and unplug the AC power cord
from the AC outlet.
Turn the projector over and remove the filters by
pulling the latches upward.
1
2
Filters prevent dust from accumulating on the optical elements inside the projector. Should the filters become
clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and
adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean...

When the projection lamp of the projector reaches its end of
life, the Lamp replacement icon appears on the screen and
LAMP REPLACE indicator lights yellow. Replace the lamp with
a new one promptly. The timing when the LAMP REPLACE
indicator should light is depending on the lamp mode.
Follow these steps to replace the lamp.
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer.  When ordering a projection lamp, give the following
information to the dealer.
●
Model No. of your...

59
Maintenance and Cleaning
This projector uses a high-pressure lamp which must be handled carefully and properly.  
Improper handling may result in accidents, injury, or create a fire hazard.
●Lamp life may differ from lamp to lamp and according to the environment of use. There is no guarantee
of the same life for each lamp. Some lamps may fail or terminate their life in a shorter period of time
than other similar lamps.
●If the projector indicates that the lamp should be replaced, i.e., if the LAMP...

60
Maintenance and Cleaning
Cleaning the Projector CabinetCleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens. 
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Unplug the AC power cord before...