Eiki Projector Lc Xb29n User Manual

41
Video Input
Move the red frame pointer to
the desired image mode and
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Standard
Cinema
Blackboard(Green)
For viewing with the user preset image mode in the Image
Adjust Menu (see pages 42–43).Image1–4
Image Select Menu icon
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Image 1, Image 2,
Image 3, and Image 4 by pressing the IMAGE button on the
remote control.
Standard
Picture mode...

42
Video Input
Image Adjustment
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the Image Adjust Menu icon.1
2Use the Point edbuttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the adjustment dialog box. Use the
Point 
7 8buttons to adjust the setting value.
Press the Point 7button to decrease the contrast; press
the Point 
8button to increase the contrast (from 0 to 63).
Press the Point...

43
Video Input
Use the Point 7 8buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).Gamma
Press the Point 7button to decrease the sharpness of the
image; press the Point 
8button to increase the sharpness
of the image (from 0 to 15).Sharpness
An interlaced video signal can be displayed in progressive
mode. Select one of the following options.
Off.......... Disabled.
L1 ........... For an active picture.
L2 ........... For a still picture.
Film ........ For watching a...

44
Video Input
This projector has the picture screen resize function, which enables you to customize the image size.
Wide Normal
Screen Size Adjustment
✔Note:
•Screen Menu cannot be operated when 720p, 1035i, or 1080i is
selected in the AV System Menu (p40).
Move the red frame pointer to the
desired function and press the
SELECT button.
Screen Menu
Screen Menu icon
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the Screen Menu icon.1
Use...

45
Language
The language used in the On-Screen Menu is available in
English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, and Japanese.
Set the red frame
pointer to the item
and press the
SELECT button.
Press the SELECT button at
Language, then the
Language Menu appears.
Setting Menu (Language)
Setting Menu icon
Setting
Setting
Auto setup
This function enables Auto Keystone correction and Auto
PC adjustment by pressing the...

46
Setting
Display
Blue back
When this function is “On,” a blue image is displayed while
the input signal is not detected. Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point 
7 8buttons to switch between each option.
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT...

47
Setting
Select [Yes] to capture
the projected image. 
Select [Yes] to
stop capturing.  
Capture
Logo (Logo and Logo PIN code lock settings)
Logo select
This function allows you to customize the screen logo with
Logo select, Capture, and Logo PIN code lock functions.
✔Note:
•When “On” is selected in the Logo PIN code lock function, Logo
select and Capture functions cannot be selected.
Capture
This function enables you to capture an image being
projected to use it for a starting-up display or interval...

48
Logo PIN code lock
Setting
This function prevents an unauthorized person from
changing the screen logo.
Off............ The screen logo can be changed freely from
the Logo Menu (p.47).
On ............ The screen logo cannot be changed without
a Logo PIN code.
If you want to change the Logo PIN code lock setting,
press the SELECT button and the Logo PIN code dialog
box appears. Enter a Logo PIN code by following the
steps below. The initial Logo PIN code is set to “4321”
at the factory.Logo PIN code...

49
Setting
Ceiling 
Rear 
Ceiling
When this function is set to “On,” the picture will be
top/bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to “On,” the picture will be
left/right reversed. This function is used to project the
image from rear of the screen.
Input search
This function detects the input signal automatically. When a
signal is found, the search will stop. Use the Point 
7 8
buttons to select one of...

50
Setting
Power management
Time left before Lamp is off.
Power management
For reducing power consumption as well as maintaining the
lamp life, the Power management function turns off the
projection lamp when the projector is not operated for a
certain period.
If the input signal is interrupted and no button is pressed for
more than 30 seconds, the timer display with “No signal”
appears. It starts the countdown until the lamp is turned off.
Use the Point 
7 8buttons to set the countdown timer.
Select one...