Eiki Projector Lc Xb29n User Manual

31
Computer Input
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Move the red frame pointer
to Auto PC Adj. and press
the SELECT button.
“Please wait...” appears
while the Auto PC
adjustment is in process.
PC Adjust Menu
PC Adjust Menu icon
Auto PC Adjustment
Remote Control
AUTO PC button
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control....

32
Computer Input
PC Adjust Menu
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer. 
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move...

33
Computer Input
Vacant
Values of “Total dots”,
“Horizontal”, “Vertical”, 
“Display area H”, and
“Display area V”.
Close this dialog box.
To store adjusted data To clear adjusted data
This Mode has stored
parameters.
Move the red frame pointer
to the desired item and
press the SELECT button.
Use the Point7 8buttons to adjust the horizontal area
displayed by this projector.Display area H
Use the Point7 8buttons to adjust the vertical area
displayed by this projector.Display area V
Reset
Store
Exit the PC...

34
Computer Input
Move the red frame pointer to
the desired image mode and
press the SELECT button.
The selected image mode is check marked.
Image Select Menu
Normal picture mode preset on the projector.Standard
Picture mode with improved halftone for graphics.Real
For the image projected on a blackboard. See above for
further description.Blackboard(Green)
Image Select Menu icon
IMAGE button
Dynamic
Real
Image 1
Image 2
Image 3
Image Mode Selection 
Image 4
For viewing with the user preset image mode in...

35
Computer Input
Use the Point 7 8buttons
to adjust the setting value.
Move the red frame
pointer to the desired
item and then press
the SELECT button.
Image Adjust Menu
Image Adjust Menu icon
Selected Image mode
Image Adjustment
Reset
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the Image Adjust Menu icon.1
2Use the Point edbuttons to move the red frame
pointer to the desired item and then press the SELECT
button to display the...

36
Computer Input
Store
Exit the Image Adjust Menu.
Quit
Store icon
This projector has the picture screen resize function, which enables you to customize the image size.
Move the red frame
pointer to the function
and press the SELECT
button.
Screen Menu
Screen Menu icon
Screen Size Adjustment
Wide
Provide the image to fit the screen size.Normal
True
Provide the image in its original size. When the original
image size is larger than the screen size (1024 x 768), the
projector enters to the panning mode...

37
Computer Input
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand
the image size. Use the Point 
ed7 8buttons to pan the
image. The Panning function can work only when the image
is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM 
ebutton on the remote control. 
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM 
edbuttons, SELECT, and Point buttons. Digital zoom +
Select Digital...

ON - OFF
POWERINPUTWARNINGMENU
SELECT
38
Choose Video by pressing the INPUT button on the top
control or the VIDEO button on the remote control.
Before using these buttons, correct input source should be
selected through menu operation as described below.
Use the Point edbuttons to move the red arrow
pointer to Video and then press the SELECT button to
display the Source Select Menu.
1
2
Move the pointer to
Video and press the
SELECT button.
VIDEO
Move the pointer to the source
that you want to select...

39
Video Input
Choose Computer 2 by pressing the INPUT button on the
top control or press the COMPUTER button on the remote
control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
1
Computer
2
Input Menu
Use the Point edbuttons to move the red arrow
pointer to Computer 2 and then press the SELECT
button.  2
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.3...

40
Video Input
Video System Selection
Press the MENU button to display the On-Screen
Menu. Use the Point 
7 8buttons to move the red
frame pointer to the AV System Menu icon.1
AV System Menu (Video or S-Video)
AV System Menu (Component)
Use the Point edbuttons to move the red arrow
pointer to the desired system and then press the
SELECT button.2
If the projector cannot reproduce proper video image, select
a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the...