Eiki Projector Lc Sd15 User Manual

31
Computer Input
This projector has the picture screen resize function which enables you to customize the image size.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Screen Menu icon.1
Move the red frame to a
function and press the SELECT
button.
Press the Point dbutton and move the red frame pointer to
the desired function and then press the SELECT button.2
✔Note:
• The Screen Menu cannot be operated when “720p(HDTV)”, “1035i...

32
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Input Menu icon.1
Press the Point dbutton to move the red arrow pointer to
Video or Computer and then press the SELECT button. The
Source Select Menu will appear. When selecting VIDEO,
video input is selected.  When selecting COMPUTER, go to
Step 3 to select an input source.2
Move the pointer to a correct input source and then press
the SELECT button.3
Move the pointer (red arrow)
to...

33
Video Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the AV System Menu icon.1
Video System Selection
AV System Menu (Video or S-Video)
AV System Menu (Component)
Press the Point dbutton to move the red arrow pointer to
the desired system and then press the SELECT button.2
If the projector cannot reproduce a proper video image, select a
specific broadcast signal format among PAL, SECAM, NTSC,
NTSC4.43, PAL-M, and PAL-N.
Move the...

34
Video Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Select Menu icon.1
2Press the Point dbutton to move the red frame pointer to
the desired level and then press the SELECT button.
Move the red frame pointer to a
desired level and press the SELECT
button.
The image level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture level adjusted for the picture with fine tone.Cinema...

35
Video Input
Press the Point 7 8buttons to
adjust the value.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point dbutton to move the red frame pointer to
the desired item and then press the SELECT button. The
level of each item is displayed. Adjust each level by pressing
the Point 
7 8buttons.Move the red frame pointer to
an item and then press the
SELECT button.
Image Adjust Menu
Press the Point...

36
Video Input
To store the adjusted data, select Store and press the SELECT
button. The confirmation box will appear and then select [Yes].
Stored data can be called up by selecting Image in the Image
Level Selection on page 34. If you change the Image level (p34)
without storing the adjusted data, the figures will go back to the
factory default settings.
Image Level Menu
Move the red frame pointer
to an image icon to be set
and then press the SELECT
button.
To reset the adjusted data, select Reset and...

37
Video Input
This projector has the picture screen resize function, which enables you to customize the image size.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Screen Menu icon.
Press the Point dbutton and move the red frame pointer to
the desired function and then press the SELECT button.
1
2
Move the red frame to the desired
function and press the SELECT button.
Screen Menu
Screen Menu icon
Provides image at the wide screen...

38
Display
This function allows you to decide whether to display the On-
Screen Displays. Press the Point 
7 8buttons to switch On/Off.
On  . . . . . . . show all the On-Screen Displays.
Off  . . . . . . . hide the On-Screen Displays except;
●On-Screen Menu 
●“Power off?” message 
●P-Timer 
●“No signal” message
●”Please wait ...” message Blue back
When this function is “On,” the projector produces a blue image
while input signal is not detected. Press the Point 
7 8buttons to
switch On/Off. 
Keystone...

39
Setting
Logo PIN code lock Dialog Box
Pointer
Enter a Logo PIN code
Select a number by pressing the Point 7 8buttons and fix the
number with the SELECT button. The number will change to
✳.  If you fixed a wrong number, move the pointer to Set or
Clear once by pressing the Point 
dbutton, and then return to
Logo PIN code. Enter the correct number.
Repeat this step to complete entering a four-digit number. 
When the four-digit number is fixed, the pointer will
automatically move to Set. Press the SELECT...

40
Setting
Capture
This function enables you to capture an image being projected to
use it for the starting-up display or interval of presentations.  
After capturing the projected image, go to the Logo function and
set it to “User”. Then the captured image can be displayed the
next time projector is turned on or when the NO SHOW button is
pressed. (p22) 
To capture the image, select [Yes]. To cancel the Capture function,
select [No].  
✔Note:
• Before capturing an image, select Standard in the Image...