Eiki Projector Lc Sd15 User Manual

MULTIMEDIA PROJECTOR
MODELLC-SD15
OWNER’S MANUAL 

2
Features and Design
◆Compact Design
This projector is designed compact in size and weight. It is
easy to carry and work anywhere you wish to use.
◆Compatibility
The projector widely accepts various video and computer
input signals including; Computers, 6 Color systems (PAL,
SECAM, NTSC, NTSC4.43, PAL-M, PAL-N), Component
video, S-video and RGB scart.
◆Simple Computer System Setting
The projector has the Multi-scan system to conform to
almost all computer output signals quickly. (See page 25.)
◆Auto PC...

3
Table of Contents
Features and Design  . . . . . . . . . . . . . . . . . . .2
Table of Contents  . . . . . . . . . . . . . . . . . . . . . .3
To the Owner  . . . . . . . . . . . . . . . . . . . . . . . . .4
Safety Instructions  . . . . . . . . . . . . . . . . . . . .5
Air Circulation 6
Installing the Projector in Proper Position 6
Moving the Projector 6
Compliance  . . . . . . . . . . . . . . . . . . . . . . . . . .7
Part Names and Functions  . . . . . . . . . . . . . .8
Front 8
Back 8
Bottom 8
Rear...

4
To the Owner
CAUTION : T O  REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK).  NO USER-SERVICEABLE PARTS
INSIDE EXCEPT LAMP REPLACEMENT.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE
IMPORTANT OPERATING AND MAINTENANCE
INSTRUCTIONS IN THE OWNERS MANUAL WITH
THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Before operating this...

5
Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for later
use.  Unplug this projector from AC power supply before
cleaning.  Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
Follow all warnings and instructions marked on the projector.
For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time,...

6
Safety Instructions
USE CAUTION IN CARRYING OR 
TRANSPORTING THE PROJECTOR
–Do not drop or bump the projector, otherwise damages or
malfunctions may result.
–When carrying a projector, use a suitable carrying case.
–Do not transport the projector by using a courier or transport
service in an unsuitable transport case. This may cause
damage to the projector. To transport the projector through
a courier or transport service, consult your dealer for more
information.
Moving the Projector
When moving the...

7
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
AC Power Cord for the United States and Canada :
AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and
certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the plug will fit into
the power outlet.  Do not try to defeat this safety feature. Should you be...

8
qZoom Lever 
wInfrared Remote Receiver 
eFocus Ring 
rProjection Lens 
tLens Cover 
yAir Intake Vent 
uExhaust Vent
oAir Intake Vent 
!0Terminals and Connectors
!1Power Cord Connector
!2Top Control and Indicators 
!3Air Intake Vent
!4Exhaust Vent
!5Adjustable Feet 
!6Air Intake Vents
!7Air Filters
!8Lamp Cover
e
w
q
u
i
t
r
y
!1
!0
o!3
!4
!2
Bottom
!7
!5
!6
Back Front
CAUTION
Hot air is exhausted from the exhaust vent. Do not
put heat-sensitive objects near this side.
iSpeaker
CAUTION
Hot air is...

9
Part Names and Functions
RESET button
A built-in micro processor that controls this unit may occasionally malfunction and
needs to be reset. This can be done by pressing the RESET button with a pen,
which will shut down and restart the unit. Do not use the RESET function
excessively.
Rear Terminal
MONITOR OUT
AUDIO  INVIDEOSERVICE PORT 
RESET
COMPUTER  / S-VIDEO      /COMPONENT IN
AUDIO  OUT
(VARIABLE)
qwer
ty
wAUDIO IN (Stereo)
Connect audio output from computer or video
equipment connected to qor yto...

10
Part Names and Functions
POWERLAMP
REPLACE WARNING
INPUT
MENU ON - OFF
SELECTVOLUME–VOLUME+
q
w
e
r
t
yiu
yLAMP REPLACE indicator
Emits yellow light when the life of the projection lamp
draws to an end. (p48, 54)
uWARNING indicator
Emits red light when the projector detects an abnormal
condition. This also blinks red when the internal
temperature of the projector exceeds the operating
range. (p45, 54)
ePOINT (e
ed
d7
7 
 8
8) buttons
Select an item or adjust the setting value in the On-
Screen Menu....