Eiki Projector Lc Sd15 User Manual

21
Basic Operation
Menu Bar
PC System Menu
Select computer
system. (p25)
Image Adjust Menu
Adjust the computer image. [Contrast / Brightness / Color
temp. / 
White balance (R/G/B) /
Gamma](p30)
Setting Menu
Change the settings
for the projector or
reset the lamp
replacement counter. 
(p38-44)
Sound Menu
Adjust the volume
or mute the sound.
(p23)
Image Select Menu
Select  an image level
among Dynamic,
Standard, Real,
Blackboard(Green), and
Image 1 ~ 4. (p29)
For computer source
AV System Menu
Select...

Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and
set as “User” in the Logo item in the Setting Menu (p40), the
screen changes each time you press the NO SHOW button as
follows.
The message disappears after 4 seconds.
black-out ➜the captured image ➜normal ➜• • • • •
No Show Function
22
Basic Operation
Press the FREEZE button on the remote control to freeze the...

23
Basic Operation
1
2
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Sound Menu icon.  Volume
Press the VOLUME +/– buttons on the top control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Press the + button to turn up the volume and the – button to turn
down the volume.
Mute
Press the MUTE button on the remote control to turn off the
sound. To restore the sound to its...

24
Choose Computer by pressing the INPUT button on the top
control or press the COMPUTER button on the remote control.
Before using these buttons, a correct input source should be
selected through Menu Operation as described below.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Input Menu icon.1
Computer 
Input Menu
Press the Point d button to move the red arrow pointer to
Computer and then press the SELECT button.  2
After the Source...

25
Computer Input
The Auto PC Adjustment
function operates to adjust
the projector. 
PC System Menu
The PC System Menu icon 
displays the system being
selected.
Systems on this dialog box can
be selected.Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the PC System Menu icon.
Press the Point d button to move the red arrow pointer to
the desired system and then press the 
SELECT button.  
1
2
PC System Menu
Custom Mode (1~5) set in the
PC...

26
Computer Input
The Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions
to conform to your computer. Auto PC Adjustment function can be operated as follows.
Move the red frame pointer to
the Auto PC adj. icon and
press the SELECT button. 
Please wait ... message
appears while Auto PC
Adjustment is in progress.
PC Adjust Menu
PC Adjust Menu icon
To store the adjusted parameters
The system parameters adjusted in the Auto PC Adjustment...

27
Computer Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the PC Adjust Menu icon.1
Move the red frame pointer to
an item and press the SELECT
button.
PC Adjust MenuPC Adjust Menu icon
Eliminate a flicker from the image displayed. Press the Point 7 8
buttons to adjust the value. (From 0 to 31.)
Adjust the number of total dots in one horizontal period. Press the
Point 
7 8buttons to adjust the number to match your PC image. Total...

28
Computer Input
Press the SELECT button to display the Display area dialog box
and select the resolution.Display area
Adjust the horizontal area displayed by the projector. Press the
Point 
7 8buttons to decrease/increase the value and then press
the SELECT button.Display area H
Adjust the vertical area displayed by the projector. Press the Point
7 8buttons to decrease/increase the value and then press the
SELECT button.Display area V
With this function on, SXGA image is fully displayed at 4 : 3...

29
Computer Input
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Select Menu icon.1
2Press the Point dbutton to move the red frame pointer to
the desired level and then press the SELECT button.
Move the red frame pointer to
the desired image level and
press the SELECT button.
The image level being selected.
Image Select Menu
Normal picture level preset on this projector.Standard
Picture level with improved halftone for...

30
Computer Input
Press the Point 7 8 buttons to
adjust the value.
Press the MENU button to display the On-Screen Menu.
Press the Point 
7 8buttons to move the red frame pointer
to the Image Adjust Menu icon.1
2Press the Point dbutton to move the red frame pointer to
the desired item and then press the SELECT button. The
level of each item is displayed. Adjust each level by pressing
the Point 
7 8buttons.Move the red frame pointer to
an item and then press the
SELECT button.
Image Adjust Menu
Press the...