Eiki Projector EK-300U User Manual

41
Setting
This function allows you to use the Key lock to 
set the security for the projector operation.
Select "Key lock" and press the OK button, 
then press  button to select the item you 
want.
 
Off  ............... Unlock.
Projector
Lock the operation of the top control. To unlock, 
use the remote control. 
Remote Control 
Lock the operation of the remote control. To unlock, 
use the top control. 
Key lock
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption...

42
This function is used to increase the contrast of 
the image.
  On .... Enable Iris function, increase the  
             contrast of the image.
  Off .... Disable Iris function.
The VGA IN 2/VGA OUT terminal can be  used 
as computer input or monitor output. Press▲ 
to select input or output.
  VGA 2 ......VGA 2 input.
  Monitor out  ....... Monitor out.
This item is used to adjust the volume.
  Sound 
   Press   button to increase the volume, press 
 button to decrease the volume. (0~25)
  Mute...

43
Setting
HDMI setup
Image
64-940 ....... Select when the HDMI terminal  
                  of an external device (such as a 
                  b l u - ray player) is connected to the" 
                      HDMI" terminal.
0-1023 ......  Select when the DVI-D terminal 
                    output of an external device (such  
                    as a computer) is connected to the 
                    "HDMI" terminal via a conversion 
                    cable or similar cable. Select...

44
Expand
The projector has Expand menu that allows you to set the other various expand functions 
described as follows.Expand menu
This projector provides multi-language screen 
menu.
You can press  button to select the language 
you want: English, German, French, Italian, 
Spanish, Polish, Swedish, Dutch, Portuguese, 
Japanese, Simplified Chinese, Traditional 
Chinese, Korean, Russian, Arabic, Turkey, 
Finland, Norway, Denmark, Indonesia, 
Hungary, Czech Republic, Kazakhstan, 
Vietnamese, Thai,...

45
Expand
Keystone menu
This function is used to store or reset the 
keystone correction when the AC power cord is 
unplugged. 
1 Press MENU button on the remote control 
   to display screen menu. Press   button 
   to select "Expand", then press the OK button.
2 Press  button to select "Keystone", press 
   the OK button.
3 Press  button to select the item you want 
   to set, press the OK button.
Expend
KeystoneKeystone
H/V Keystone
Corner correction
Curved correction
Reset value...

46
Expand
 Note:
● Either "H/V Keystone" , "Corner correction" or "Curved correction" setting value is valid. When 
   the "H/V Keystone" , "Corner correction" or "Curved correction" adjustment is finished, the 
   adjusted value will be reset when you adjust the other one.
● The "Curved Correction X Offset" and the "Curved Correction Y Offset" can not be adjusted 
   independently. After adjusting the "Curved Correction X/Y Gain"...

47
Expand
This function allows you to customize the screen logo with Logo select, Capture, Logo PIN code 
lock and Logo PIN code change functions.
Logo Select
This function decides on the starting-up display 
from following options.
  Default .... Show the factory-set logo.
  User..........Show the image captured by user.
  Off ........... Show the countdown display only.
Capture
You can capture a projected image as start logo . 
Select "Capture" and press the OK button on 
remote control or...

48
Security
Expand
This function allows you to use the PIN code 
lock and PIN code change functions to set the 
security for the projector operation.
PIN code lock
This function prevents the projector from 
being operated by unauthorized persons 
and provides the following setting options for 
security.
  Off .... Unlocked.
  On .... Enter the PIN code every time
             turning on the projector. If you
             want to change PIN code lock
             setting or PIN code, you must...

49
Expand
This function is used to set a frequency for filter 
cleaning.
When the projector reached a specified time 
between cleanings, a Filter warning icon 
appears on the screen, notifying the cleaning 
is necessary. After cleaning the filter, be sure 
to select RESET and set the timer. The Filter 
warning icon will not turn off until the filter 
counter is reset.
Filter counter 
Display the using time of the filter. 
Timer
Set the time to display the warning icon.
Filter counter reset
Reset the...

50
Expand
This function is used to set the internal test 
signal: Gray scale 1, Gray scale 2, Gray scale 
3, Gray scale 4, Color bar, Red, Green, Blue, 
Cross hatch, White, Black and Raster gray.Test Pattern
Test Pattern
Function : PC controls projector via LAN.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
    Connect the projector to routers or switches of the LAN by direct or\
 cross cable. If it fails to  
    connect PC and projector by parallel cable, please switch to...