Eiki Projector EK-300U User Manual

21
1. Complete peripheral connections (with a 
    computer, video,etc.) before turning on the 
    projector.
2. Connect the projector’s AC power cord into 
    the AC outlet. The POWER indicator turns 
    red. 
3. Press the POWER button on the top control   
    or on the remote control. The POWER  
    indicator becomes green and the cooling  
    fans start to work. The preparation display  
    appears on the screen.
4. If the projector is locked with a PIN code, a 
    PIN code input dialog box...

22
Basic operation
Turn off the projector
Power off ?
“Power off ? ” disappears after 4 seconds.
1.  Press the POWER button on the top control 
     or on the remote control, and "Power off?"  
     appears on the screen.
2.  Then, press the POWER button again in 4 
     seconds. The POWER indicator starts to 
     flash red, and the cooling fans keep running  
     (You can select the fan noise and running 
     speed). Now you can unplug the AC power 
     cord after the fans stop running....

23
Remote control
Screen menu
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP
PATTERN
KEYST ONE
TIMER INFO.
SCREEN
IMAGE
AUT
O
+ +
- -D.ZOOM VOLUME
MENU 
button OK button

 
button
1 Press the MENU button on the remote control 
   or top control to display the screen menu.
2   Press 
 buttons to select an entry in the main 
      menu and then press the OK button to enter 
   the submenu.
3 Press
 buttons to select an item, and then 
   press the OK button to set or enter the 
   submenu.
4...

24
Menu bar
① Display
-   
Adjust computer parameters to match with VGA input signal format: Auto PC adj., Fine sync, 
H Position , V Position  and H.Size. 
- Aspect: Normal and Wide.
-   Project way: select a project way among Front, Rear , Ceiling/Front, Ceiling/Rear, Auto ceiling/
Front and Auto ceiling/Rear.
- Menu position : set the menu's position on the screen. 
- Background display: set the background display color.
- System : select a system signal format to match the input source.
② Color...

25
Auto setup function
Adjust zoom and focus
This function is available just by pressing 
the AUTO button on the remote control or 
top control. The system then automatically 
performs various settings in the "Expand" 
menu, including "Input search", "Auto PC adj." 
and "Auto keystone".
Rotate the ZOOM ring to zoom in or zoom out 
the image.
Rotate the FOCUS ring to adjust the focus of 
the image.
Basic operation
VGA
VIDEO HDMI
MENU
INPUT
FREEZEMUTE
BLANK
LAMP PATTERN...

26
VGAVIDEO HDMI
MENU
INPUT
FREEZEMUTE
BLANK
LAMP PATTERN
KEYST ONE
TIMERINFO.
SCREEN IMAGE
AUT
O
++
--D.ZOOM VOLUME
Remote control
Keystone screen
KEYSTONEbutton

button
Basic operation
Keystone 
Press KEYSTONE button on the remote 
control. The Keystone screen will display, (it 
includes: H/V Keystone, Corner correction, 
Curved correction and Reset value), press 
 
to select the item. If a projected image has keystone distortion, 
follow the steps below to manually correct the 
keystone...

27
Volume
Remote controlMUTE 
button
VGA VIDEO HDMI
MENU
INPUT
FREEZE
MUTE
BLANK
LAMP PATTERN
KEYST ONE
TIMERINFO.
SCREEN IMAGE
AUT
O
++
--D.ZOOM VOLUME
4 Press the OK button to select.
Volume menu
Volume
Press  to increase the volume and  to 
decrease  the volume.
Mute
Press 
 button to switch the mute function 
(On/Off).
1 Press the MENU button to display the screen 
   menu.  Press 
 button to select the "Setting" 
   menu icon. Press the OK button to enter the 
   submenu entry.
2 Press...

28
LAMP button
Press LAMP button to select a lamp mode to 
change the brightness of the screen.
Normal ...Normal brightness.
ECO ...... Lower brightness, reducing the 
                     lamp power consumption and 
                      extending the lamp life.
Remote control operation
FREEZE button
Press FREEZE button on the remote control, 
video will be paused and the audio is muted. The 
icon is displayed on the screen during Freeze. 
Press FREEZE button again, the video playback 
resumes and the...

29
D.ZOOM+ button
Press D.ZOOM+ button, the on-screen menu will 
disappear while the information on digital zoom + 
appears. 
Press ▲▼◄►to move the image horizontally and 
vertically.
The moving is effective only when the image is 
larger than the size of the screen.
BLANK 
VGA VIDEO HDMI
MENU
INPUT
FREEZEMUTE
BLANK
LAMP PATTERN
KEYST ONE
TIMERINFO.
SCREEN IMAGE
AUT
O
++
--D.ZOOM VOLUME
BLANK button 
Press BLANK button on the remote control to 
black out the image. To restore to normal, press 
the BLANK...

30
Basic operation
Direct Operation
Press VGA, HDMI or Video on the remote control 
as input source. 
When input source is from 
computer connected to VGA IN 1 
terminal with VGA cable,  please 
select "VGA 1".
When input source is from 
computer connected to VGA IN 2 /
VGA OUT terminal with VGA cable,  
please select "VGA  2".
Note:
  -  When the "Input search" function is set to "On" in the "Auto setup" function, press  AUTO button, 
    the input signal will...