Eiki Projector EK-300U User Manual

61
Multicast Setting: setting Sound volume, 
Bandwidth and Capture rate etc. Global Setting: setting remote control, capture 
by audio or screen etc. ⑤ 
Network Display Management
    Setting device and password management.
⑥  Disconnect the projector.
Network Control Instructions  

62
Using useful functions
Memory Viewer function supports the following image files.
Display the Memory Viewer screen
The Memory Viewer function is used to project the pictures which are stored in the USB memory when 
the USB memory is inserted into USB A(VIEWER) terminal of the projector.
PictureExtension
Format Description
jpg/jpeg Baseline encoder 24 bit
Max. resolution : 10000 x 10000
Progressive RGB 24 bit Max. resolution : Panel Resolution
bmp 1, 4, 8 bit Palette-based
RGB 24, 32 bit Max....

63
Play the PDFPlaying the PDF file. 
press ▲▼◄►  to select a PDF file and press the OK button, playing the PDF on the full screen.
5
5 55
GO1
GO1
1/6
Displays the previous or next page.
The page number increases or decreases by 5 pages.
The page number increases or decreases by 1 page.
Jumps to page number directly.
Switches PDF file between full screen display or whole page display
. 
Switches  the  display  size  on  3  levels  of  magnification.  Press  ▲▼on  the 
remote control to move the display...

64
Using useful functions
The USB Display function is used to project the image from the computer which is connected to USB-
B(DISPLAY) terminal of the projector by a USB converting cable.
USB Display function
Note:
  - The driver is not installed in your computer, and it will be removed from the computer when 
    disconnecting the USB cable.
  -  It will take a while when you want to project the computer screen.
  - Connect a USB cable directly to the USB connector of a computer. It will not work when...

65
■ When using Mac OS
Using useful functions
When terminate the USB display, remove the USB cable directly. 
Termination of the USB display4. Right-click the driver icon         in the dock of computer and selec\
t one item in Pop-up menu.
 Note:
  -  It will take a while when you want to project the computer screen.
  - Connect a USB cable directly to the USB connector of a computer. It will not work when 
    connecting through a USB hub. Mac OS operating environment
Projecting the USB Display ●...

66
Maintenance and cleaning
Caution
Do not leave the projector with the AC power cord connected under an abnormal condition. 
It may result in fire or electric shock.
WARNING indicator
WARNING indicator
WARNING indicator
The WARNING indicator shows the state of the function which protects the proj\
ector. Check the 
state of the WARNING indicator to take proper maintenance.
The projector is shut down and the WARNING 
indicator is flashing red.
When the temperature inside the projector 
exceeds the normal...

67
Maintenance and cleaning
Cleaning the filter
Filter counter reset
The air filter prevents dust from accumulating on the surface of the optical elements inside 
the projector. Should the air filter become clogged with dust particles, it will reduce cooling 
fans’ effectiveness and may result in a buildup of internal heat and adversely a\
ffects the life of 
the projector. If the Filter warning icon appears on the screen, the air filter should be cleaned 
immediately. Clean the air filter following the...

68
Maintenance and cleaning
Clean the projector lens
Clean the cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning 
cloth that contains non-abrasive camera 
lens cleaner, or use a lens cleaning paper or 
commercially available air blower to clean the 
lens.
Avoid using an excessive amount of cleaner. 
Abrasive cleaners, solvents, or other harsh 
chemicals might scratch the surface of lens.
Unplug the AC power cord before cleaning.
Gently wipe the projector...

69
Replace the lamp
When the projection lamp of the projector 
reaches its end of life, the Lamp replacement 
icon appears on the screen. Replace the lamp 
with a new one of the same type promptly. 
The timing when the lamp replacement icon 
appears is depending on the lamp mode.
Maintenance and cleaning
Lamp replacement icon
Lamp replacement
As temperature inside the projector is high, 
you should cool the projector for at least 45 
minutes before you open the lamp cover.When the lamp isn’t illuminated,...

70
Order Replacement lamp
Replacement lamp can be ordered through your dealer.  When ordering a projection lamp, give the 
following information to the dealer.
Replacement Lamp Model No.: 23040049
This projector uses a high-pressure lamp which must be handled carefully\
 and properly.
Improper handling may result in accidents, injury, or create a fire hazard.
  ● Lamp life may differ from lamp to lamp and according to the environment of use. There is no  
     guarantee of the same life for each lamp....