Eiki Lc-Xwp2000 Multimedia Projector Owners Manual

							
LC-XWP2000 
OWNE R ’S   MAN U AL 
MULTIMEDIA PROJECTOR  
						

							
About owner’s manual 
Please read owner’s manual thoroughly to ensure correct usage of the projecto r 
and its features. After reading, store owner’s manual in a safe place for future  
reference.  
Features 
1. Design with 3LCD optical system . 
2. Auto V keystone function, +/- 30 degrees. 
3. Auto brightness control. 
4. Auto ceiling function. 
5. Extreme Short Throw Distance. 
The content of this manual is subje c t t o change without period notice. All righ t s reserved. 
1  
						

							
Contents
Aboutowner’smanual...............................................
Contents............................................................
SafetyInstructions.................................................
ProductSafetyLabels...............................................
CheckingthePackageContents.....................................
PartNamesandFunctions..........................................
MainUnit.......................................................................................
ControlPanel...............................................................................
RearViewI/OBoard........................................................................
BottomView...................................................................................
RemoteControl...............................................................................
.................................................
1
2
4
9
10
11
11
13
15
17
18
19 
Installation.........................................................
SettingUptheProjector...................................................................
ScreensizeandProjectionDistance....................................................
AdjustingtheImagePosition.............................................................
MovingtheProjector........................................................................
20
20
22
23
24
Howtoconnect.....................................................
DesktopPC......................................................................... .... . . .....
LaptopPC................................................................................. . ....
Video............................................................................................
28
28
29
30
2
BasicOperation.....................................................
Turningonthe Projector-Procedure........................................................
AdjustingtheScreenImage..................................................................
32
32
35
Remote Control Batteries Installation
Turning on the Projector....................................................................    25
Connecting PC to the Projector...........................................................    27
Connecting  Video to the Projector.......................................................   30
Turning off the Projector....................................................................... 34 
						

							
Contents
Functions of Menu(OSD)............................................
KeypadOperating............................................................................
ComputerMode..............................................................................
Videomode...................................................................................
Appendix............................................................
Maintenance and Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
ListofSupportDisplayModes...........................................................
ConfigurationsofTerminal................................................................
36
36
37
44
50
51
56
57
3
Reset LampTimer............................................................................ . .   
Technical Specifications........................................................... . . . . . . . . . . . .   50
Cei ling Mounted Instal lation Guide..........................................................
Cleaningthe Projector........................................................... . . . . . . . . . . . . . . . .  52
CleaningtheLens........................................................... . . . . . . . . . . . . . . . . . . . . .  
51
52
43
Cleaning Air Fi lter........................................................... . . . . . . . . . . . . . . . . . . . . .  52
LampReplacement........................................................... . . . . . . . . . . . . . . . . . ..53
Indicators................................................................................... . . . ...54 
						

							
Safety Instructions
This symbol indicates information that, if ignored, could possibly 
result in personal injury or even death. WARNING
This symbol indicates information that, if ignored, could result in 
personal injury or physical damage. 
TypicalSymbols
This symbol indicates an additional warning (including cautions).
Anillustration  isprovidedtoclarify  thecontents  (for  example: the illustration to 
the left indicates danger of electrical shock).
This symbol indicates a prohibited action. The contents will be clearly \
indicated in 
an illustration or description near the symbol (for example: the symbol\
 to the left 
indicates that disassembly is prohibited). 
This symbol indicates a compulsory action. The contents will be clearly \
indicated in
an illustration or description near the symbol (for example : the symbo\
l to the left 
shows that the power plug should be disconnected from the power outlet)\
.
4
CAUTION 
						

							
Safety Instructions(continued)
WARNING
If a problem should occur
If smoke or strange odors arise, continued use could result in fire or electrical shock. In 
such case, immediately turn off the power switch and then disconnect the power plug 
from the power outlet. After making sure that the smoke or odor has stopped, contact 
your dealer for repairs. Never attempt to make repairs yourself because this is dangerous. 
Do not use this projector if there is no image or sound, or if the sound is distorted. 
Continued use could result in fire or electrical shock. In such case, immediately turn off 
the power switch; disconnect the power plug from the power outlet and contact your 
dealer. 
If water would enter the inside of this projector, immediately turn off the power switch, 
disconnect the power plug fromthepoweroutletandcontactyour dealer. 
Do not install on an unstable surface.
Do not install this projector on an unstable surface such as a wobbly stand or incline 
because this could result in the projector falling and causing injury. 
Do not open the cabinet.
Never open the cabinet. There is high voltage inside which can cause electrical shock. 
Contact your dealer for internal inspection, adjustment and repair. 
Do not modify.
Do not modify this projector because this could result in fire or electrical shock.
Do not use in the bathroom or near water site.
Do not expose this unit to rain or use near water… for example, in the bathroom, a wet 
basement, near a swimming pool, etc…  
Do not insert objects into the Projector. 
Do not insert metal objects through the ventilation openings, etc., of this projector or drop
such objects inside because this could result in fire or electrical shock. 
If a foreign object should enter this projector, immediately turn off the power 
switch, disconnect the power plug from the power outlet and contact your 
dealer.
Continued use could result in fire or electrical shock. Use special caution in  household 
and where children are present. 
5 
						

							
Safety Instructions(continued)
WARNING
Do not look through the lens when the lamp is on.
Never look through the lens when the lamp is on. The powerful light could adversely 
affect vision. Use special caution in households where children are present. 
Avoid shock or impact on the projector.
If the projector should fall, resulting in damage to the cabinet, immedi\
ately turn off the
power switch, disconnect the power plug from the power outlet and contac\
t your dealer. 
Continued use could result in fire or electrical shock. 
Do not place this projector in a container containing liquid. Do not place 
flower vases, flowerpots, cups, cosmetics, liquids such as water, etc., on 
top of this projector.
Do not use any power cable except those supplied with the projector. 
The use of any other power cable could result in fire or electrical shoc\
k. 
Do not shine the laser beam onto yourself or other.
The laser pointer function of projector remote control emits classⅡ laser beam.
Do not look directly into the laser beam outlet or direct the laser beam\
 at other people. 
Vision can be impaired if the laser beam enters the eyes.
Especially pay attention if children are present.
High temperatures are generated when the lamp is lit; so do not place 
objects in front of the lens.
6
Allowing the proper amount of space on the top, sides, and rear of the p\
rojector cabinet
is critical for proper air circulation and cooling of the unit.
The dimension shown here indicate the minimum space required. If the pro\
jector is to 
be built into a compartment or similarly enclosed, these minimum distanc\
es must be 
maintained. 
						

							
Battery usage
7
Safety Instructions(continued)
CAUTION
Placing heavy objects on top of this projector could result in loss of b\
alance or falling
and cause personal injury or damage the projector. 
Do not block th ventilation openings. 
Do not block the ventilatoin openings of this projector.
Blocking ventilation could lead to internal overheating which could resu\
lt in fire.
Do not place this projector on its side during use or push it into a sma\
ll, poorly ventilated 
location.
Do not place this projector on a carpet or bedding or cover it with a ta\
blecloth, etc. Also, 
when installing this projector, make sure the ventilation openings are a\
t least 30 cm (12 
inch) clearance around the projector.
Care and maintenance.
For safety purposes, disconnect the power plug from the power outlet bef\
ore starting the
care and maintenance of this projector.
Replace the batteries with the same type only.
Do not mix old and  new batteries; this could result in fire or personal\
 injury due to battery 
cracking or leakage.
Make sure the plus and minus terminals are correctly aligned when loadin\
g the batteries.
Incorrect loading could redult in personal injury or contamination of th\
e surroundings due 
to battery cracking or leakage.
Have the projector interior cleaned regularly.
Contact your dealer to arrange for the service.
Accumulations of dust inside the projector can result in fire or malfunc\
tion if not cleaned 
for an extended period.
Ask your dealer for details about internal cleaning. 
						

							
SafetyInstructions(continued)
CAUTION
Avoid installation in humid or dusty locations. Do notinstallthisprojector in a
humid or dusty location. This could result in fire or electrical shock.  
Do not handle the power cord roughly. Keep the powercord away from heaters;
Theheatcouldmeltthepowercordandcausefireorelectrical shock.
Do nottouch the power plugwith wet hands;
Thiscouldresultinelectricalshock.
When disconnecting the power plug, do notpull on the power cord. This could
damagethepowercordandcausefireorelectricalshock. Always grip the
plugwhendisconnecting.
When the projector is notto beused foran extendedperiod.
If the projector is not to be usedforanextendedperiod becauseoftravel,
etc., disconnectthe power plug from the poweroutlet and replace lens
cover.
8
NOTE: This symbol and recycle systemare applied only to EUcountries in theother area of
     world.  
Your EIKI productisdesigned and manufactured with high quality materialsand componentswhich can be recycled and reused. 
This symbol meansthat electricaland electronic equipment,attheir end-of-life, shouldbedisposed of separatelyfrom yourhouseholdwaste. Please dispose of this equipment at your local community wastecollection/recycling centre.In the European Union there areseparate collection systems forused electrical and electronicproducts.   Please help usto conserve the environmentwe live in!
Compliance
Federal communications Commission Notice
Thisequipment hasbeen tested and found tocomply with the limitsfor aClass B digital device, pursuantto part 15 of the FCC Rules. These limits are designedto providereasonable protection against harmfulinterference ina residentialinstallation. This equipmentgenerates, uses, and canradiate radio frequencyenergy and, if notinstalled and usedinaccordance with the instructions, may causeharmful interferencetoradiocommunications. However, there is no guarantee thatinterference will not occur in a particularinstallation.If this equipment doescause harmfulinterference to radio or televisionreception, whichcanbe determined by turningtheequipment off and on, the user is encouraged to try tocorrect theinterference by oneormoreof thefollowing measures:   -Reorient or relocate thereceiving antenna.
-Increase theseparation between the equipmentand receiver.
-Connecttheequipment into an outlet on a circuitdifferentfrom thatto which thereceiver isconnected.
-Consultthe dealeror anexperienced radio/TV technician forhelp.
Use of shieldedcable is requiredto comply with class B limits in SubpartB ofPart 15 of FCCRules.
Do not make anychanges or modifications to the equipment unless otherwise specifiedin the instructions.Ifsuch changesor modifications should be made, you couldbe requiredto stop operation oftheequipment. 
Model Number(s):LC-XWP2000
Trade Name:EIKI
Responsibleparty:EIKI
Address: 30251 Esperanza RanchoSanta Margarita CA 92688-2132 U.S.A.
Telephone No.: 800-242-3454(949-457-0200)
Voor de klanten in  
Nederland  
Bijditproductzijnbatterijen
geleverd.
Wanneerdezeleegzijn,moet
uzenietweggooienmaar
inleverenalsKCA. 
						

							
9
Business card
EMI LABEL
100-240V, 50/60Hz, 4A(1.2A~2.8A)
EIKI
Model:LC-XIP2000Input:
Serial no.:
Productsafetylabels
Safety labels are used on or within the projector to alert you to items or areas requiring your
attention.
LENS WARRANTY LABEL
LAMP WARRANTY LABEL