Eiki Lc-Xs25 Multimedia Projector Owners Manual

21
Basic Operation
Menu Bar
PC System Menu
U s e d   t o   s e l e c t 
computer  system. 
(p.27)
Setting Menu
U s e d   t o   s e t   t h e 
p r o j e c t o r ' s   o p e r a t i n g 
configurations.
(pp.45-56)
Image Select Menu
U s e d   t o   s e l e c t   a n 
i m a g e   l e v e l   a m o n g 
D y n a m i c ,   S t a n d a r d , 
R e a l ,   B l a c k b o a r d 
( G r e e n ) ,   C o l o r b o a r d 
a n d   I m a g e   1   ~   4 . 
(pp.31-32)
For computer source
Guide Window
Show  the  selected...

22
Basic Operation
Open the slide shutter.
Rotate the Zoom Ring to zoom in and out.
Rotate  the  Focus Ring  to  adjust  the  projected  picture 
focus.
Close the slide shutter.
Zoom and Focus Adjustment
Zoom Ring
(Rear)Focus Ring
(Front)
If  a  projected  picture  still  has  keystone  distortion  after 
pressing  the  AUTO  SETUP  button  on  the  top  control, 
correct the image manually as follows:
Press  the  KEYSTONE  button  on  the  remote  control.    The 
keystone dialog box appears. 
Correct...

23
12
+_
Basic Operation
Press  the  VOLUME+/–  buttons  on  the  top  control  or  on 
the  remote  control  to  adjust  the  volume.    The  volume 
dialog box appears on the screen for a few seconds.
Press the MUTE button on the remote control to cut off the 
sound.    To  restore  the  sound  to  its  previous  level,  press 
the MUTE  button again or press the VOLUME +/– buttons.
Mute function is also effective for AUDIO OUT jack. Volume
Mute
Direct Operation
Sound Adjustment
1
2
Press  the  MENU...

24
Basic Operation
black out → the captured image → normal → • • • • •
Press the NO SHOW button on the remote control to black 
out the image.  To restore to normal, press the NO SHOW 
button again or press any other button.  When a projected 
image  is  captured  and  set  as  "User"  in  the  Logo  selection 
(p.48),  the  screen  changes  each  time  you  press  the  NO 
SHOW button as follows. NO SHOW button
Press  the  AUTO  SET  button  on  the  remote  control  to 
operate  the  Auto...

25
Computer Input 
Choose  Computer  1  (Analog)  or  Computer  2  by  pressing 
the  INPUT  button  on  the  top  control  or  choose  Computer 
1 ( A n a l o g )  b y  p r e s s i n g  t h e  C O M P U T E R  1  b u t t o n  o n 
the  remote  control  or  choose  computer  2  by  pressing 
COMPUTER 2 button on the remote control. 
Before using these buttons, correct input source should be 
selected through Menu operation as described below.
Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )...

26
Choose Computer 1 (Digital) by pressing the INPUT button 
on  the  top  control  or  press  the  COMPUTER  1  button  on 
the remote control. 
Before using these buttons, correct input source should be 
selected through Menu operation as described below.
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct OperationInput Menu
Input Menu icon
Computer1
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the  red 
frame pointer to the Input...

27
Computer Input
Computer System Selection
This  projector  automatically  tunes  to  various  types  of  computers  based  on  VGA,  SVGA,  XGA,  SXGA, 
WXGA,  or  UXGA  with  its  Multi-scan  system  and Auto  PC Adjustment.    If  Computer  is  selected  as  a  signal 
source,  this  projector  automatically  detects  the  signal  format  and  tunes  to  project  a  proper  image  without 
any additional setting. (Signal formats provided in this projector is s\
hown on pages 73-74)
One of the...

28
Computer Input
Auto  PC  Adjustment  function  is  provided  to  automatically  adjust  Fine  sync,  Total  dots,  Horizontal,  and 
Vertical to conform to your computer.  Auto PC Adjustment function can be operated as follows.
Auto PC Adjustment
The Auto  PC  adjustment  function  can  be  operated  directly 
by pressing  the AUTO SETUP button on the top control or 
the AUTO SET button on the remote control.(p.46)
Direct Operation
12
+_
Remote Control 
AUTO SET button
Press  the  MENU  button  to...

2
Computer Input
Press  the  MENU  button  to  display  the  On-Screen 
Menu.    Press  the  Point ◄►  buttons  to  move  the  red 
frame pointer to the PC Adjust Menu icon.
Press  the  Point ▲▼  buttons  to  move  the  red  frame  
pointer  to  the  item  that  you  want  to  adjust  and  then 
press  the  SELECT  button  to  display  the  adjustment 
dialog  box.    Press  the  Point 
◄►  buttons  to  adjust  the 
value.
Manual PC Adjustment
Some  computers  employ  special  signal  formats  which...

30
Computer Input
Adjust  the  horizontal  area  displayed  by  this  projector.  
Press  the  Point ◄►  buttons  to  decrease/increase  the 
value. Display area H
Adjust  the  vertical  area  displayed  by  this  projector.    Press 
the Point ◄► buttons to decrease/increase the value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To  store  adjusted  data,  move  the  red  frame  pointer  to  the 
Store  item  and  then  press  the  SELECT  button.    Move  the 
red  arrow  pointer  to  any...