Eiki Lc-Xs25 Multimedia Projector Owners Manual

Multimedia ProjectorOwner's Manual
LC-XS25
LC-XS30MODEL 

2
Features and Design
This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease 
of  use. This  projector  utilizes  built-in  multimedia  features,  a  palette  of  16.77  million  colors,  and  matrix  liquid 
crystal display (LCD) technology.
◆ Compatibility
  The 
projector widely accepts various video and 
computer  input  signals  including:  Computers, 
6   C o l o r   s y s t e m s   ( PA L ,   S E C A M ,   N T S C , 
NTSC4.43,  PAL-M,  and...

3
Table of Contents
Trademarks
Each  name  of  corporations  or  products  in  this  book  is  either  a  registered  trademark  or  a  trademark  of  its 
respective corporation.
Features and Design  .  .  .  .  .  .  .  .  .  .  .  . .2
Table of Contents  .
  .  .  .  .  .  .  .  .  .  .  .  .  .  . .3
To the Owner  .
  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4
Safety Instructions  .
  .  .  .  .  .  .  .  .  .  .  .  .  . .5
Air Circulation  6
Installing the Projector in Proper...

4
To the Owner
B e f o r e  o p e r a t i n g  t h i s  p r o j e c t o r,  r e a d  t h i s  m a n u a l 
thoroughly and operate the projector properly.
This  projector  provides  many  convenient  features  and 
functions.  Operating the projector properly enables you to 
manage those features and maintains it in better condition 
for a considerable time.
Improper  operation  may  result  in  not  only  shortening  the 
product-life,  but  also  malfunctions,  fire  hazard,  or  other 
accidents.
If...

5
Safety Instructions
All  the  safety  and  operating  instructions  should  be  read 
before the product is operated.
Read  all  of  the  instructions  given  here  and  retain  them 
for  later  use.    Unplug  this  projector  from AC  power  supply 
before  cleaning.  Do  not  use  liquid  or  aerosol  cleaners.  
Use a damp cloth for cleaning.
F o l l o w  a l l  w a r n i n g s  a n d  i n s t r u c t i o n s  m a r k e d  o n  t h e 
projector.
For  added  protection  to  the  projector  during...

6
Safety Instructions
Openings in the cabinet are provided for ventilation and to 
ensure  reliable  operation  of  the  product  and  to  protect  it 
from overheating, and these openings must not be blocked 
or covered. 
 CAUTION
Hot air is exhausted from the exhaust vent.  When using 
or  installing  the  projector,  the  following  precautions 
should be taken. 
–
 Do  not  put  any  flammable  object  or  spray  can  near 
the  projector,  hot  air  is  exhausted  from  the  ventilation 
holes.
–...

7
Compliance
Federal Communications Commission NoticeNote:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device,  pursuant  to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed 
and  used  in  accordance  with  the  instructions,  may  cause  harmful...

8
Part Names and Functions
① Air Intake Vent
② Power Cord Connector
③ Infrared Remote Receiver
④ Focus Ring (front)
⑤ Lens and Lens cover
⑥	Zoom Ring (rear)
⑦ Slide Shutter
⑧ Exhaust Vent
CAUTION
Hot air is exhausted from the exhaust vent. Do not 
put heat-sensitive objects near this side.
⑨
  Lamp Cover 
⑩ Speaker
⑪ Top Controls and Indicators
⑫ Terminals and Connectors
⑬ Filter Cover
⑭ Adjustable feet
	Kensington Security Slot
This  slot  is  for  a  Kensington  lock  used  to  deter 
theft of the...


Part Names and Functions
Rear Terminal
③  MONITOR OUT
    This terminal can be used to output the incoming
      R G B  s i g n a l  f r o m  C O M P U T E R  I N  1  /  D V I - I  terminal  or  COMPUTER  IN  2/COMPONENT  IN 
terminal to the other monitor (p.14).
① CONTROL PORT
  When 
the  projector  is  controlled  by  a  computer, 
connect to this jack with serial control cable.
②  COMPUTER IN 2 / COMPONENT IN   
  Connect  output  signal  from  a  computer,  RGB 
scart  21-pin  video  output...

10
Top Control
② LAMP REPLACE indicator
  T
urn  yellow  when  the  life  of  the  projection  lamp 
draws to an end. (pp.60, 71-72)
④	WARNING FILTER indicator
  – Blink  slow  when  the  filter  is  being  scrolled 
(pp.57, 71).
  –

  B l i n k  f a s t  w h e n  t h e  f i l t e r  c a r t r i d g e  i s  n o t 
installed (pp.57, 72)
  –

  Light  orange  when  the  clogging  of  the  filter  is 
detected  or  the  filter  counter  reaches  a  time 
set in the timer setting, urging immediate filter/...