Eiki Lc-Xip2600 Interactive Projector Owners Manual

MENU
28
MENU
Advanced Menu
Step:
1.			Use 	the 	▲ 	/▼buttons	
to select an item.
2.			 Use	the	◄	/	►	
buttons to select an 
item or adjust the 
value.
ItemSelection Description
ZOOM / PANEXECUTEExecute digital zoom and pan function.
FREEZE OFF/ON Freeze the current image on the screen.
BLANK OFF/ON Hide the image. Display on the screen turns into black.
BLANK POWER OFF 15/30/60 
Minute
Set power off time after "Blank".
RESET EXECUTE Reset all menu function to their factory default values.
RESIZE...

29
MENU
Advanced Menu
LOGO SETTING
This function allows you 
to customize the start-up 
logo. 
In order to access 
this page PIN code is 
required.
 
ItemSelection Description
LOGO MODEDEFAULT
USER
OFF
Select	Mode(	►	cursor	button)
The factory logo.
The image you captured.
The blank image. You can select color with background 
function.
LOGO
CAPTURE EXECUTE
Start to capture the image.(PC mode only)
BACKGROUND BLACK
BLUE
WHITESet background color.
LOGO SIZE ORIGINAL
FULL Display the captured image in...

30
MENU
NOTE	 ►You	can	capture	an	image	only	in	computer	mode.
	 ►The	area	that	can	be	captured	is	512	x	384	dots.
Advanced Menu
Logo Capture
How to use this function?

		Select Logo Capture item in the logo 
setting	menu,	then	press	►	button.
		Red frame will appear to select captures 
area.

		Use 4 direction buttons to adjust the 
position of the frame.

		Press "MENU" to start capturing and 
display a dialog. 
Image

Logo Capture In Progress. 

31
MENU
Presentation Menu
Step:
1.			Use	the	▲	/▼buttons	
to select an item.
2.			Use 	the 	◄ 	/ 	► 	buttons	
to select an item or 
adjust the value.
ItemSelection Description
AUTO CEILINGOFF / ONAutomatically invert the image when the projector is turned 
upside down, i.e. when the projector is mounted on the 
ceiling.
FRONT EXECUTENormal projection mode.
CEILING EXECUTEMirror the image vertically, only for the projector mounted 
upside down.
REAR EXECUTEMirror the image horizontally, only for...

32
MENU
NOTE
►		The	replacement	warning	message	is	set	to	appear	after	about	3000	hours	of	lamp	use	in	order	
to maintain the initial brightness. When replacement message appears, replace the lamp with a 
new one as soon as possible, even if the lamp is still workable.
Presentation Menu
Reset Lamp Timer
The lamp timer is the time counted after the last resetting. The usage time of the lamp 
is	shown	in	the	PRESENTATION	Menu.	Pressing	the	RESET 	button	or	the	►	button	
displays a dialog.
To	reset	the	lamp...

33
MENU
Security Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
ItemSelection Description
PIN LOCK 
PROTECTIONOFF
ON 1
ON 2
OFF:  
   Turn off PIN lock protection.
ON 1:   
After plugging in AC power, you need to key in PIN 
code	at	the	first	time	of	use.	If	the	 AC	power	stays	
unplugged, you do not need to key in PIN code next 
time when you use the projector.
ON 2:   You need to key in PIN code every time when you 
turn on...

34
MENU
Security Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
ItemSelection Description
FILTER TIMERShow	the	filter	use	time.
RESET FILTER
TIMEREXECUTEReset	the	filter	timer	after	cleaning	/	changing	filter.
FILTER COUNTER500 hours
800 hours
1000 hoursSelect (500 / 800 / 1000 hours) depending on the 
environment.(default : 500 hours). Please see next page.
MAC ADDR. For LAN control module, "MAC ADDR." will be shown in...

35
MENU
NOTE
►	Please	reset	the	Filter	time	only	when	you	replace	the	filter.
Auto Filter Alert
Auto	Filter	Alert	in	SECURITY 	category	shows	the	air	filter	use	time	and	alerts	user	to	change	
filter.	When	the	operating	time 	reaches	the	set	time,	a	warning	message 	will	appear	on	the	screen	to	
remind	user	of	filter	cleaning	/replacing.
Filter Replace...
Filter has been used for more than 500 hours. 

36
MENU
VOL -VOL+
MENU
INPUT
PIN Key In Operation
When the projector is turned on and the 
PIN LOCK PROTECTION is set to [ON], 
the image will show as on the right side.
1.   Press the MENU button on the projector 
or remote control. Enter PIN code by 
keypad or remote control.
2.   How to enter a PIN code? 
You can use control panel or remote 
control.
CONTROL PANEL  KEYSTONE REMOTE CONTROLThe control panel and remote control 
buttons to enter a sequence of PIN code is 
like the photo below.
(1)	Press	◄...

Network Control Software Application
37
Network Control Software Application
		Register	the	projector(s)	to	be	controlled	only	for	the	first	time.	
					"Auto	Search"	finds	and	lists	up	the	projectors	in	the	network.	
     Assign Projector name and Group name for ease.
		Save	the	setting	as	a	Project	file. 
By	opening	the	Project	file	the	setting	can	be	recovered	easily	from	next	time.
		Monitor the status of registered projectors up to 255 units. 
Status of Power, Temperature and System and...