Eiki Lc-Xip2600 Interactive Projector Owners Manual

18
Setting Up
How To Connect
Laptop or desktop computer
Connect the audio cable if necessary
1.  Please connect the audio cable to the AUDIO IN 1 if the computer cable is connected to 
the projector's RGB IN. 
2.   Please connect the audio cable to the AUDIO IN 2 if the computer cable is connected to 
the projector's DVI-I IN. 
3.  Please connect the audio cable to the AUDIO IN 3 if the video cables are connected to 
the VEDIO / S-VIDEO / Component port of the projector. 
  If the selected video...

19
Remote Control
Remote Control Batteries 
Installation
1. Remove the battery cover. 
2. Load the batteries.
   Make sure the poles are correctly oriented.
3. Close the battery cover.
 Caution
►Avoid	excessive	heat	and	humidity.
►Do	not	drop	the	remote	control.
►	If	the	remote	control	will	not	be	used	for	an	extended	period,	remove	the	batteries.
►	Do	not	expose	the	remote	control	to	water	or	moisture.	 This	could	result	in	malfunction.
►	Replace	the	battery	when	remote	control	operation	becomes...

Remote Control (Optional)
20
Remote Control
POWER
Power on / operation mode, Standby mode, Cool 
down mode.
INPUT
Select input source :
Note : 
If the projector can not be captured the signals 
within 15 minutes, it will be shut down 
automatically.
MENU
Display or hide the On-Screen Display main menu 
page.
 
Press  or  to select On-Screen Display menu item.
 
Press  or  to select and adjust the function of On-Screen Display menu item or value.
LASER
Aim the remote control at the screen, press and 
hold...

21
Menu Operation
How To Operate On-Screen Display
1.  Press "Menu" button. Following menu will appear.
2.  Press up / down / left / right button on control panel or remote control\
 to 
select item or adjust value.
Up / Down / Right / Left button
Menu button
007 

MENU (PC Mode)
22
MENU (PC Mode)
Picture Menu
Step:
1.			Use	the	▲	/▼	buttons	to	
select an item.
2.			Use	the	◄	/	►	cursor	
buttons to select an item or 
adjust the value.
ItemSelection Description
BRIGHTNESS000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjust the image sharpness.
DISPLAY MODE NATURAL
Natural color.
CINEMA Enhance contrast ratio when displaying DVD contents.
DAYLIGHT Suitable when ambient light is strong.
GREEN BOARD
WHITE...

23
MENU (PC Mode)
Audio Menu
Step:
1.			Use	the	▲	/▼	buttons	
to select an item.
2.			Use 	the 	◄ 	/ 	► 	buttons	
to select an item or 
adjust the value.
ItemSelection Description
VOLUME00/40Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 

24
MENU (PC Mode)
Setting Menu
Step:
1.			Use	the	▲	/▼buttons	
to select an item.
2.			Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
ItemSelection Description
H POSITION000/100 Move the image position horizontally.
This function can be used under computer signal input only.
V POSITION 000/100 Move the image position vertically.
This function can be used under computer signal input only.
PHASE 000/100 Adjust the image sharpness.
FREQUENCY 000/200Set the horizontal scanning frequency....

MENU (Video Mode)
25
MENU (Video Mode)
Picture Menu
Step:
1.			Use	the	▲	/▼	buttons	
to select an item.
2.			Use	the	◄	/	►	cursor	
buttons to select an 
item or adjust the 
value.
ItemSelection Description
BRIGHTNESS000/100 Adjust the image brightness level.
CONTRAST 000/100 Adjust the image contrast level.
SHARPNESS 000/015 Adjust the image sharpness.
COLOR 000/100 Adjust the strength of whole color.
This function can be used under video signal, S-Video 
signal, or component video signal input only....

26
MENU (Video Mode)
Audio Menu
Step:
1.			Use	the	▲	/▼	buttons	to	
select an item.
2.			Use	the	◄	/	►	buttons	
to select an item or adjust 
the value.
ItemSelection Description
VOLUME00/40Adjust the volume.
MUTE OFF/ON Mute the volume OFF / ON. 

27
MENU (Video Mode)
Setting Menu
Step:
1.			Use	the	▲	/▼buttons	to	
select an item.
2.			Use	the	◄	/	►	buttons	
to select an item or 
adjust the value.
ItemSelection Description
AUTO KEYSTONEOFF/ONAutomatically Correct keystone distortion in image.
V KEYSTONE  -70/+70Correct vertical keystone distortion in image manually.
AUTO SEARCH OFF/ONSearch signal source manually or automatically.