Eiki Lc-Xdp3500 Multimedia Projector Owners Manual

8
Part Names
Rear
A MOUSE
Connect a USB mouse cable to a computer 
to control computer mouse functions.
B RS232
Serial data port for controlling the projector 
with  a  computer  or  other  RS-232  control 
device.
C AUDIO IN 1 & D AUDIO IN 2
Mini  jack  port  corresponds  to  computer 
input.
E AUDIO OUT
F RGB IN
Input analog RGB signal from a computer.
G RGB OUT
C o n n e c t   a n   e x t e r n a l   m o n i t o r   t o   t h i s 
connection to view the “RGB IN” input.
H DVI-I IN
Input digital DVI-I...

Setting Up
9
Setting Up
When installed against a wall, leave about 20cm (7.9in.) between the p\
rojector and the wall.
8.74~10.52
5.80~7.00
4.33~5.24
2.87~3.48
2.28~2.77
1.69~2.07
1.11~1.36Distance(M)
Image size(inch)8.74~10.52
5.80~7.00
4.33~5.24
2.87~3.48
2.28~2.77
1.69~2.07
1.11~1.36
Image size(inch)
Distance(M)
Arrangement
1. 
Before installation, make sure that the projector is turned off and the power cord is disconnected.
2. Do not set up and move the projector, while it is hot.
3.   The distance...

10
Setting Up
Power ON / OFF
1.2.
3. 4.
Turning On The Power
1.		Make	sure	that	power	cord	is	firmly	and	
correctly connected to the projector.
2.  The POWER indicator will light up in green.
3.  Press POWER button on the control panel or 
the remote control to turn on the projector.
4. Rotate the zoom ring to adjust the screen size.
5. Rotate the focus ring to adjust the focus.
Turning Off The Power
1.  Press the POWER button on the control 
panel or the remote control. The “power off” 
confirmation...

11
Setting Up
Setting Up The Projector
The projector supports the following four different projection methods. 
1. Front projection
2. Rear projection
3. Rear ceiling projection
4. Front ceiling projection
Special installation is required in order to suspend the projector from \
the ceiling. Please ask your 
dealer for details.  

12
Setting Up
Ceiling Mounted Installation Guide 
Attach	ceiling	mount	at	four-suspension	bracket	fixing	points	when	suspending	from	a	ceiling.	
Special installation is required in order to suspend the projector from \
the ceiling. Please ask your 
dealer for details.
Security Anchor
The product is equipped with security anchor and PIN 
LOCK (See page 33 for detials) functions to help prevent 
unauthorized removal of the projector.
MAX M4x8 mm For Mounting
WARNING
►Do	not	grasp	the	security	anchor	to...

13
Setting Up
Adjusting The Projector’s Elevation
Use the adjustable foot at the front of the projector to set the image h\
eight.
1   Holding the projector, push the foot adjust 
buttons to loosen the front adjustable foot.
12   Position the front side of the projector to the 
desired height.
3   Release the foot adjust buttons in order to 
lock the front adjustable feet.
14   Please make sure that the front adjustable 
feet are locked.
 CAUTION
*   
The adjustment range of front adjustable 
foot is 0...

14
Setting Up
AUDIO OUTMOUSERS-232AUDIO OUTDVI OUTVGA OUTRGB IN
AUDIO IN 
VIDEO OUT AUDIO OUT (L)&(R)
S-VIDEO OUTYPb/Cb Pr/Cr
Desktop / Lapto p
Speaker DVD Player
How To Connect
Laptop or desktop computer
Before starting, make sure that the projector and computer are both turn\
ed off.
Connect the computer cable
Connect the computer cable from the computer to the projector's RGB IN.
If needed, connect the MONITOR OUT to a monitor to view input from RGB IN.
Tighten the screw on all connectors. 

15
Setting Up
How To Connect
Laptop or desktop computer
Connect the audio cable if necessary
1.  Please connect the audio cable to the AUDIO IN 1 if the computer cable is 
connected to the projector's RGB IN. 
2.   Please connect the audio cable to the AUDIO IN 2 if the computer cable is 
connected to the projector's DVI-I IN. 
3.  Please connect the audio cable to the AUDIO IN 3 if the video cables are 
connected to the VEDIO/S-VIDEO/Y,Pb,Pr port of the projector. 
Connect USB Mouse
1.  Before...

16
Remote Control
Remote Control Batteries 
Installation
1. Remove the battery cover. 
2. Load the batteries.
   Make sure the poles are correctly oriented.
3. Close the battery cover.
 Caution
►Avoid	excessive	heat	and	humidity.
►Do	not	drop	the	remote	control.
►	If	the	remote	control	will	not	be	used	for	an	extended	period,	remove	the	batteries.
►	Do	not	expose	the	remote	control	to	water	or	moisture.	 This	could	result	in	malfunction.
►	Replace	the	battery	when	remote	control	operation	becomes...

Remote Control (Optional)
17
Remote Control
POWER
Power on / operation mode, Standby mode, Cool down mode.
INPUT
Select input source :
RGB 1       RGB 2 
S-Video
Video
DVI-I
Y,Pb,Pr
MENU
Display or hide the On-Screen Display main menu page.
 
Press  or  to select On-Screen Display menu item.
 
Press  or  to select and adjust the function of On-Screen Display menu item or value.
LASER
Aim the remote control at the screen, press and hold button to activate the laser pointer.
MUTE
Mute audio.
AUTO
Refresh...