Eiki Lc-Xdp3500 Multimedia Projector Owners Manual

38
Before Use
Modify The Projector Setting
		If modifying the registered projector setting is needed, please move you\
r cursor to 
the data table and click the item that you would like to modify. The detail will be 
shown on the right side table.
< Graph 5 > : Register Table.
		After changing the projector setting, you can save the data by clicking \
 button or 
cancel by clicking  button.
ItemDescription
Projector nameShow the Host name.
(16 characters at most in ASCII.)
IP AddressShow the IP...

Registering And Configuring The Projector
39
Registering And Configuring The Projector
Delete
		Select the registered projector in monitor window. Click mouse right key and select
     “ Delete ” to erase the registered projector data.
< Graph 6 > : Register Table. 

40
Registering And Configuring The Projector
Projector Setting
		Select the registered projector in monitor window. Click mouse right key and select “ 
projector	setting	”	to	modify	the	registered	projector	data.	After	finishing	the	setting,	
you can save by clicking  button or cancel by clicking  button.
< Graph 7 > : Register table.
< Graph 8 > :Setting  

41
Registering And Configuring The Projector
System Setting
	Click  button (system setting) to modify system alert setting.
 
< Graph 9 > 

42
Registering And Configuring The Projector
System Setting
Monitor
ItemDescription
Lamp TimerRead lamp use time from projector.
Air Filter AlertRead Air Filter Timer from projector.
System Status/
Tempeture Level
Read System Status and Temperature from projector in Power On 
status.
Input SourceRead Input Source from projector in Power ON status.
< Table 2 >
Default Setting
ItemDescription
Lamp Timer Alert (Hr.)
Default Setting Includes 1000/1500/2000 Hours.
When Lamp Timer reaches alert target, window...

43
Registering And Configuring The Projector
Link
		Select the registered projector in monitor window. Click mouse right key and select  
      “ Link ” to show the control panel table and the projector c\
onnecting status.
< Graph 12 > : The control panel table. 

Control Panel Window Introduction
44
Control Panel Window Introduction
		Power Control
IconName
Power on
Power off
		Input Source
IconName
Video
S-Video
Y,Pb,Pr
DVI-I
RGB 1
Change Input Source
		Function Key
IconNameIconName
UpFreeze
DownBlank
LeftKeystone Correction +
RightKeystone Correction -
MenuIncrease Brightness
Auto SyncDecrease Brightness
MuteHigher Contrast 

45
Control Panel Window Introduction
	Function Key
IconName
Lower Contrast
Zoom In
Zoom Out
Volume Up
Volume Down
	Projector Status
IconName
System Status
Input Source Status
Lamp Timer
Air Filter Timer   

46
Control Panel Window Introduction
	Network Control Window introduction
IconNameDescription
Scan allCapture the all registered projectors’ information 
one time only.
Start Auto ScanAccording to the system setting, get the projector 
information automatically.
Stop Auto CaptureStop scanning the projector information.
Auto SearchSearch the projector in the same network to 
register and modify the setting.
Open Project FileOpen	project	file	which	was	saved.
Save Project FileSave the registered projector...

Maintenance Of Projector
47
Maintenance of Projector
Filter
Sponge Filter
When	a	warning	message	appears	to	remind	you	to	clean	the	sponge	filter,	please	clean the	sponge	filter	immediately.	(P.32)

Replacing the Anti-dust filter (Part Numcer:13340230)
When	the	use	time	reaches	the	filter	counter	time,	the	projector	will	display	a	message	to	remind	replacing	a	new	filter.	If	there	is	no	spare	air	filter	available,	please	contact	your	dealer. 
When	the	use	time	reaches	the	filter	counter	time,	the...