Eiki Eip-2600 Dlp Projector Owners Manual

29
Displaying the Black Screen
and Turning off the Sound
Temporarily
Adjusting the Volume
Switching the Input Mode
Press  COMPUTER , DVI (EIP-2600
only) , S-VIDEO  or  VIDEO  on the remote
control to select the input mode.
• When you press  INPUT on the projector or  DVI
on the remote control (EIP-2600 only), the INPUT
list appears.
Press  P/R  to switch the INPUT mode.
Select the appropriate input mode for
the connected equipment.
Press  VOL +/–  on the remote control or
– O /Q + on the projector to...

30
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. De-
pending on the input signal, you can choose a desired image.
Press RESIZE .•See page 43 for setting on menu screen.RESIZE
button
COMPUTER
For 4:3 screen For 16:9 screen
Input signal
4:3 aspect ratio
5:4 aspect ratio
16:10 aspect ratio 16:9 aspect ratio
: 
Cutout area on which images cannot be projected
:  Area where the signals are off screen
Computer
Resolution
lower than XGA
EIP-2600 EIP-250...

31
VIDEOVIDEO/DTV
*1
*1
*1
*1
*1
*1
*1
*1
*2*2
4:3 aspect ratioSqueeze
Letter box
16:9 aspect ratio 16:9 aspect ratio
(4:3 aspect ratio in 16:9)
For 4:3 screen For 16:9 screen
Input signal
Image type NORMAL
Video/DTV
480 I,  480P,
576 I,  576P,
NTSC, PAL, SECAM
720P, 1035 I,
1080 I,  1080P
540P
:  Cutout area on which images cannot be projected
:  Area on which the image is not included in the original signals
The Image Shift function can be used for these images.
Same as NORMAL mode.
BORDER STRETCH...

32
Operating with the Remote Control
Displaying and Setting the
Break Timer
Press BREAK TIMER .•The timer starts to count down from 5
minutes.1
2
Press  P/R /O /Q  to adjust the
length of the break time.
• Increases with  P or  Q
5 minutes  s 6 minutes  s 60 minutes•Shortens with  O or  R4 minutes  s 3 minutes  s1 minute
• The break time can be set in units of one
minute (up to 60 minutes).
On-screen display
Canceling the break timer display function
Press  BREAK TIMER .
POINTER button
ECO+QUIET button...

33
Auto Sync
(Auto Sync Adjustment)
Freezing a Moving Image
Note
•When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page  48.)
Auto Sy nc function works when detect-
ing input signal after the projector turns
on.
Press  AUTO SYNC  to manually adjust
with Auto Sync function.
Press  FREEZE .
•The projected image is frozen.
Press  FREEZE  a gain to return to
the moving image from the cur-
rently connected device.
Selecting the Picture Mode...

34
Using the Remote Control as the Wireless Computer Mouse
When connecting the projector and the computer with a USB cable, you can use
the remote control as the computer mouse.
Connecting with a USB cable
MOUSE/Adjustment
buttons ( '/" /\ /| )
R-CLICK button
L-CLICK button PA GE UP/
PA GE DOWN buttons
The mouse pointer can be oper-
ated in the following way after it
is connected.
■When moving the cursorPress MOUSE/Adjustment buttons ( P/R /O /Q ).
■  When left-clickingPress  L-CLICK .
■When...

35
The following shows the items that can be set in the projector.
Menu Items
Picture ModeContrast 0 0
0
0
BrightColorTint0
Sharp
Standard
SEL./ADJ. ENTER END 0
0
Red
Blue
Picture
SCR - ADJ PRJ - ADJ Help
Picture Mode
CLR Temp
BrilliantColor
TMC.M.S. Setting
C.M.S. Standard
SEL./ADJ. ENTER END
Progressive
Lamp Setting
0
1
On
3D Progressive
Bright
DNR
Off
Reset
Picture SCR - ADJ PRJ - ADJ Help
PAGE 2
Main menu Sub menuPicture
Page  40Page  40
Page  41
Page  41
Page  41
Page  41
Page  41
Page  42
Page...

36
Menu Items (Continued)
SEL./ADJ. ENTER END
Resize
Image Shift 0
0
Keystone
OSD Display
Closed Caption
Background
Setup Guide
PRJ Mode
Language Front
English On Logo On
CC1 Normal
Picture
SCR - ADJ PRJ - ADJ Help
Off
CC1
CC2
Main menu Sub menuSCR - ADJPage 43
Language
Image Shift Resize
Page
 43
Page  43
Page  43
Page  43
Page  44
Page  44
Page  44
Page  44
Keystone
OSD Display [On/Off]
Page  44Closed Caption
Background
Setup Guide [On/Off]
PRJ Mode Logo
Blue
None
Front
Ceiling + Front
Rear
Ceiling +...

37
SEL ENTER END
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settingsSEL.
Picture SCR - ADJ PRJ - ADJ
Help
The items you can set with the “Help”
menu
“Help” menu n Page  48•Vertical stripes or flickering image appear
Auto Sync
Clock
Phase
• Data image is not centered
Auto Sync
H-Pos
V-Pos
• Color is faded or poor
COMPUTER/COMPONENT or DVI (EIP-2600
only)...

38
Menu Selections (Adjustments)
Example: Adjusting “Bright”.•This operation can also be performed by using the buttons on the projector.
Press  MENU/HELP .•The “Picture” menu screen for the se-
lected input mode is displayed.
Example: “Picture” screen menu for COMPUTER (RGB) input
(EIP-2600)
Press Q or  O and select “Picture”
to adjust.
1
2
Menu item
Picture Mode
Contrast 0 0
0
Bright
Standard
SEL./ADJ. ENTER END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
1On
Bright
DNR...