Eiki Eip-2600 Dlp Projector Owners Manual
Have a look at the manual Eiki Eip-2600 Dlp Projector Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 422 Eiki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
29 Displaying the Black Screen and Turning off the Sound Temporarily Adjusting the Volume Switching the Input Mode Press COMPUTER , DVI (EIP-2600 only) , S-VIDEO or VIDEO on the remote control to select the input mode. • When you press INPUT on the projector or DVI on the remote control (EIP-2600 only), the INPUT list appears. Press P/R to switch the INPUT mode. Select the appropriate input mode for the connected equipment. Press VOL +/– on the remote control or – O /Q + on the projector to adjust the vol- ume. Note •P ressing VOL– /– O will lower the volume. •P ressing VOL+ /Q + will raise the volume. • When the projector is connected to exter nal equipment, the volume level of the exter nal equip- ment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when tur ning the projector on/ off or when changing the input signal. • When you do not want to output the sound from the projector’s speaker while the projector is con- nected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 45.) Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound. Note •P ressing AV MUTE again will turn the pro- jected image back on. On-screen display On-screen display VOL +/– (Volume) buttons COMPUTER, DVI (EIP-2600 only), S-VIDEO, VIDEO buttons AV MUTE button
30
Resize Mode
This function allows you to modify or customize the resize mode to enhance the input image. De-
pending on the input signal, you can choose a desired image.
Press RESIZE .•See page 43 for setting on menu screen.RESIZE
button
COMPUTER
For 4:3 screen For 16:9 screen
Input signal
4:3 aspect ratio
5:4 aspect ratio
16:10 aspect ratio 16:9 aspect ratio
:
Cutout area on which images cannot be projected
: Area where the signals are off screen
Computer
Resolution
lower than XGA
EIP-2600 EIP-250
XGA SVGA Resolution
lower than SVGA
Resolution
higher than XGA Resolution
higherthan
SVGA
SXGA (1280 × 1024)
1280 × 720
1280 × 768
1280 × 800
1360
× 768
1366 × 768
STRETCH
Image type
NORMAL FULL BORDER DOT BY DOT
*1
*1
*2*2
*2*2
*1, *3*1
*1*1
*1*2*3
The Image Shift function can be used for these images.
Same as NORMAL mode.
For EIP-250 model, “Border” cannot be selected with certain resolution selections in which the horizontal part of aspect ratio becomes smaller than
4:3 (such as 1280 × 1024, among others).
Image Projection (Continued)
EIP-2600
EIP-250
Main resolution
SVGA (800 x 600) XGA (1024 x 768)
SXGA (1280 x 1024) 1280 x 800
SVGA (800 x 600) XGA (1024 x 768)
SXGA (1280 x 1024) 1280 x 800 DOT BY DOT
800 x 600
1280 x 1024 1280 x 800
1024 x 768
1280 x 1024 1280 x 800 BORDER
768 x 576
720 x 576
922 x 576
600 x 450
720 x 450 STRETCH
1024 x 576
800 x 450
NORMAL
1024 x 768
968 x 768
1024 x 640
800 x 600
750 x 600
800 x 500 FULL
1024 x 768
800 x 600
31 VIDEOVIDEO/DTV *1 *1 *1 *1 *1 *1 *1 *1 *2*2 4:3 aspect ratioSqueeze Letter box 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9) For 4:3 screen For 16:9 screen Input signal Image type NORMAL Video/DTV 480 I, 480P, 576 I, 576P, NTSC, PAL, SECAM 720P, 1035 I, 1080 I, 1080P 540P : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals The Image Shift function can be used for these images. Same as NORMAL mode. BORDER STRETCH AREA ZOOM V -STRETCH *1*2 About Copyrights • When using the RESIZE function to select an image size with a different aspect ratio to a TV program or video image, the image will look different from its original appearance. Keep this in mind while choosing an image size. • The use of the Resize or Keystone Correction function to compress or stretch the image for commercial purposes/public displays in a café, hotel, etc. may be an infringement of copyright protected by law for copyright holders. Please use caution.
32 Operating with the Remote Control Displaying and Setting the Break Timer Press BREAK TIMER .•The timer starts to count down from 5 minutes.1 2 Press P/R /O /Q to adjust the length of the break time. • Increases with P or Q 5 minutes s 6 minutes s 60 minutes•Shortens with O or R4 minutes s 3 minutes s1 minute • The break time can be set in units of one minute (up to 60 minutes). On-screen display Canceling the break timer display function Press BREAK TIMER . POINTER button ECO+QUIET button Adjustment buttons ( P /R /O /Q ) BREAK TIMER button SPOT button AUTO SYNC button FREEZE button PICTURE MODE button MAGNIFY buttons EFFECT button Note •B reak Timer does not function while the pro- jector is operating the “Auto Sync”, “FREEZE” or “AV MUTE” functions. Switching the Eco+Quiet Mode Press ECO+QUIET to switch the Eco+Quiet mode between on and off. • When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend. Press POINTER and press P/R / O /Q on the remote control to move the pointer. •P ress EFFECT to change the pointer icon (5 types). Displaying the Pointer Press SPOT and press P/R /O /Q on the remote control to move the spot area. •P ress EFFECT to change the spot area size (3 types). Using the Spot Function 1 Press POINTER again.•The pointer will disappear.2 1 Press SPOT again.•The spot area will disappear.2 •Refer to “Lamp Setting” on page 42 for de- tails of the Eco+Quiet mode. Note Star Finger1 Finger2 Heart Underline 1/9 1/25 1/8
33 Auto Sync (Auto Sync Adjustment) Freezing a Moving Image Note •When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. (See page 48.) Auto Sy nc function works when detect- ing input signal after the projector turns on. Press AUTO SYNC to manually adjust with Auto Sync function. Press FREEZE . •The projected image is frozen. Press FREEZE a gain to return to the moving image from the cur- rently connected device. Selecting the Picture Mode Press PICTURE MODE .•When pressing PICTURE MODE , the picture mode changes in the following order: STANDARD PRESENTATION MOVIE GAME sRGB You can select the appropriate picture mode for the projected image, such as movie or video game. Note • See page 40 for details on the picture mode. * *“sRGB” is displayed only when RGB signal is input. Displaying an Enlarged Portion of an Image Graphs, tables and other portions of projected images can be enlarged. This is helpful when providing more detailed explanations. 1 2 1 2 Press M AGNIFY on the remote control. • Enlarges the image. •P ressing or MAGNIFY enlarges or reduces the projected image. Note 1 2 3 4 Press . Press. •Y ou can change the location of the en- larged image using P, R , O and Q. Press RETURN on the remote con- trol to cancel the operation. • The magnification then returns to ×1. Note • The selectable magnifications differ de- pending on the input signal. • In the following cases, the image will return to the normal size ( ×1). - When switching the INPUT mode. - When RETURN has been pressed. - When the input signal is changed. - When the input signal resolution and refresh rate (vertical frequency) change. - When the Resize mode is changed. - When the Picture mode is changed. - When the Progressive mode is changed.
34 Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse. Connecting with a USB cable MOUSE/Adjustment buttons ( '/" /\ /| ) R-CLICK button L-CLICK button PA GE UP/ PA GE DOWN buttons The mouse pointer can be oper- ated in the following way after it is connected. ■When moving the cursorPress MOUSE/Adjustment buttons ( P/R /O /Q ). ■ When left-clickingPress L-CLICK . ■When right-clickingPress R-CLICK . ■When your computer supports only a one-click mouse (such as Macintosh) Press L-CLICK or R-CLICK . L-CLICK and R-CLICK have common function. ■ When using [Page Up] or [Page Down] Note •This function only works with the Microsoft® Windows® OS and Mac OS®. However, this function does not work with the following operation systems that do not support USB. • Versions earlier than Windows ® 95 • Versions earlier than Windows® NT4.0 • Versions earlier than Mac OS® 8.5 •Y ou cannot use this function when displaying the menu screen. • Confirm that the computer recognizes the USB connection. Operating with the Remote Control (Continued) To USB terminalTo USB terminal USB cable (commercially available) Computer Same as the [Page Up] and [Page Down] keys on a computer keyboard. Press PAGE UP or PAGE DOWN .
35 The following shows the items that can be set in the projector. Menu Items Picture ModeContrast 0 0 0 0 BrightColorTint0 Sharp Standard SEL./ADJ. ENTER END 0 0 Red Blue Picture SCR - ADJ PRJ - ADJ Help Picture Mode CLR Temp BrilliantColor TMC.M.S. Setting C.M.S. Standard SEL./ADJ. ENTER END Progressive Lamp Setting 0 1 On 3D Progressive Bright DNR Off Reset Picture SCR - ADJ PRJ - ADJ Help PAGE 2 Main menu Sub menuPicture Page 40Page 40 Page 41 Page 41 Page 41 Page 41 Page 41 Page 42 Page 42 +30 -30Contrast +30 -30 +30 -30 +30 -30 1 -1 2 0 +30 -30+30 -30+30 -30Tint Color Sharp Bright Progressive Lamp Setting Reset 2D Progressive 3D Progressive Film Mode CLR Temp BrilliantColor™ C.M.S. Setting [On/Off] C.M.S. Standard Presentation Movie Game sRGB*1 Picture Mode *2 *2 *2 Red Blue *2 *3 Page 42 DNR Off Level 1 Level 2 Bright Eco + Quiet C.M.S.-Hue C.M.S.-Saturation C.M.S.-Value Page 41 Page 41 Page 41Reset +30 -30 R +30 -30 +30 -30 +30 -30+30 -30+30 -30C G B Y M Reset *1 Items when inputting RGB signal through COMPUTER or DVI (EIP-2600 only). * 2 Items when inputting component signal through COMPUTER or DVI (EIP-2600 only), or when selecting S-VIDEO or VIDEO. * 3 On model EIP-250, this item is “Bright Boost”. PA GE 1 “Picture” menu “C.M.S.” SEL./ADJ. Return ENTER END C. M. S. - H u e 0 0 0 0 C. M. S. - SaturationC. M. S. - Value 0 0 R Y G CB M C. M. S. Reset Reset
36 Menu Items (Continued) SEL./ADJ. ENTER END Resize Image Shift 0 0 Keystone OSD Display Closed Caption Background Setup Guide PRJ Mode Language Front English On Logo On CC1 Normal Picture SCR - ADJ PRJ - ADJ Help Off CC1 CC2 Main menu Sub menuSCR - ADJPage 43 Language Image Shift Resize Page 43 Page 43 Page 43 Page 43 Page 44 Page 44 Page 44 Page 44 Keystone OSD Display [On/Off] Page 44Closed Caption Background Setup Guide [On/Off] PRJ Mode Logo Blue None Front Ceiling + Front Rear Ceiling + Rear +96 -96 +75 -75 +80 -80+40 -40 Normal Full Dot By Dot Area Zoom V-Stretch Border Stretch Normal Area Zoom V-Stretch Border Stretch COMPUTER/ DTV VIDEO/ S-VIDEO English Deutsch Español Nederlands Français Italiano Svenska Português polski Magyar Türkçe *3 *4 *3 *4 “Screen adjustment (SCR-ADJ)” menu SEL./ADJ. ENTER END Auto Power Off System Sound System Lock hOn On Auto Restart On STANDBY Mode Standard 0min 0 Lamp Timer(Life) 100% Auto Sync On Picture SCR - ADJ PRJ - ADJHelp Speaker OnAudio Input Audio 1RS-232C 9600bpsFan Mode Normal Disable Main menu Sub menuPRJ - ADJPage 45 STANDBY Mode System Sound [On/Off] Speaker [On/Off] System Lock [Enable/Disable] Lamp Timer(Life)Page 45 Auto Restart [On/Off]Page 45 Auto Power Off [On/Off]Page 45 Page 45 Page 45 Page 46 Page 47 Fan ModePage 46Normal High RS-232CPage 469600bps 115200bps Audio InputPage 46Audio 1 Audio 2 Standard Eco Auto Sync [On/Off] Page 45 *5 “Projector adjustment (PRJ-ADJ)” menu *3 Adjustment range for EIP-2600. *4 Adjustment range for EIP-250. * 5 This item is available for EIP-2600 only.
37 SEL ENTER END There is no picture or audio Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settingsSEL. Picture SCR - ADJ PRJ - ADJ Help The items you can set with the “Help” menu “Help” menu n Page 48•Vertical stripes or flickering image appear Auto Sync Clock Phase • Data image is not centered Auto Sync H-Pos V-Pos • Color is faded or poor COMPUTER/COMPONENT or DVI (EIP-2600 only) inputSignal type: Auto/RGB/Component S-VIDEO or VIDEO input Video System: Auto/PAL/SECAM/ NTSC3.58/NTSC4.43/ PAL-M/PAL-N/PAL-60 DVI (Digital) input (EIP-2600 only) Dynamic range: Auto/Standard/Enhanced * The selectable items vary depending on the in- put signal and the selected input mode. “Help” menu
38 Menu Selections (Adjustments) Example: Adjusting “Bright”.•This operation can also be performed by using the buttons on the projector. Press MENU/HELP .•The “Picture” menu screen for the se- lected input mode is displayed. Example: “Picture” screen menu for COMPUTER (RGB) input (EIP-2600) Press Q or O and select “Picture” to adjust. 1 2 Menu item Picture Mode Contrast 0 0 0 Bright Standard SEL./ADJ. ENTER END 0 0 Red BlueCLR Temp BrilliantColorTM C.M.S. Setting C.M.S. Lamp Setting 0 1On Bright DNR Off Reset Picture SCR - ADJ PRJ - ADJ Help Adjustment buttons ( P/R /O /Q ) MENU/HELP button ENTER button Adjustment buttons (P /R /O /Q ) ENTER button RETURN button •P ress RETURN to return to the previous screen when the menu is displayed. MENU/HELP button Using the Menu Screen