Eiki Eip-2600 Dlp Projector Owners Manual

39
Press P or  R and select “Bright”
to adjust.
• The selected item is highlighted.
•P ress  ENTER  again to return to the pre-
vious screen.
Press  O or  Q to adjust the item
selected.
• The adjustment is stored.
Press  MENU/HELP .•The menu screen will disappear.
3
4
5
0
Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode Contrast 0
0Standard
SEL./ADJ. Single ADJ END 0
0
Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting 0
1On
Bright
Reset
15
Bright
Picture SCR - ADJ PRJ - ADJ Help...

40
Picture Adjustment (“Picture” Menu)
QPAGE1 QPAGE2
Picture Mode
Contrast 0 0
0
0
BrightColorTint0
Sharp
Standard
SEL./ADJ. ENTER END 0
0
Red
Blue
Picture
SCR - ADJ PRJ - ADJ Help1
2Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting
C.M.S. Standard
SEL./ADJ. ENTER END
Progressive
Lamp Setting
0
1
On
3D Progressive
Bright
DNR
Off
Reset
Picture SCR - ADJ PRJ - ADJ Help
765 4
23
Menu operation  n Page  38
Note
•You can also press  PICTURE MODE on the remote control to select the picture mode. (See...

41
2
2 2
2
2  Adjusting the Image
*1 Not displayed in the RGB input mode.
*2 Not adjustable/selectable when selecting “sRGB”.
*3  BrilliantColor™ uses Texas Instruments’
BrilliantColor™ technology. As the BrilliantColor™
level is increased, the image becomes brighter
while the color reproduction is kept at a high level.
Q  button
For morecontrast.
For more
brightness.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.For stronger red.For stronger blue.For making the
effect...

42
5
5 5
5
5  Progressive
Note
•In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
• When the image is blurred or noisy, switch to
the optimal mode.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with...

43
Adjusting the Projected Image
(“SCR - ADJ” Menu)
SEL./ADJ. ENTER END
Resize
Image Shift 0
0
Keystone
OSD Display
Background Closed Caption
Setup Guide
PRJ Mode
Language Front
English On Logo CC1 On Normal
Picture
SCR - ADJ PRJ - ADJ Help
987
4 3
21
6
5
1
1 1
1
1  Setting the Resize Mode
Note
•For details of the Resize mode, see pages
30  and  31.
•Y ou can also press  RESIZE on the remote con-
trol to set the resize mode. (See page  30.)
2
2 2
2
2 Adjusting the Image
P osition
You can move the...

44
The projector can switch the on-screen display
language among 17 languages.
9
9 9
9
9Selecting the On-screen
Display Language
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
polski
Magyar
Türkçe
Menu operation  n Page  38
Adjusting the Projected Image
(“SCR - ADJ” Menu) (Continued)
5 
5  5 
5 
5  Closed Caption7
7 7
7
7Selecting the Setup Guide
Selectable items
On
Off
Description
Displaying the Setup Guide
when turning the projector on.Not displaying the Setup Guide.
8
8 8
8
8...

45
SEL./ADJ. ENTER END
Auto Power Off
System Sound
System Lock
hOn On
Auto Restart On
STANDBY Mode Standard
0min
0
Lamp Timer(Life) 100%
Speaker On
Audio Input Audio 1
RS-232C 9600bps
Fan Mode Normal
Disable
Auto Sync On
Picture SCR - ADJ
PRJ - ADJHelp
1
2
3
4
5
6
7
8
9
0
Menu operation n Page  38
Note
•When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining...

46
Adjusting the Projector Function (“PRJ - ADJ” Menu)
(Continued)
Info
•If you lose or forget your keycode, contact
your nearest EIKI Authorized Dealer or Service
Center. Even if the product warranty is valid,
the keycode reset will incur a charge.
0 
0  0 
0 
0  System Lock Function
This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on.  We suggest you record
the keycode in a safe place where...

47
Input screen for keycode
Note
To cancel the keycode that you have already
set
•P ress  R on the projector for four times in steps
4 and 5 above.
When the System Lock is set• When System Lock is set, the keycode input
screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.
Enter the same keycode in “Re-
confirm”.
System Lock ––––
5
Locking the Operation
Buttons on the Projector
Use this function to lock the operation buttons
on the projector.
a
 T...

48
Troubleshooting with the “Help” Menu
Utilizing the “Help” Menu
Functions
This function advises you to solve the problems during usage.
Note
•Y ou can adjust the items with check marks ( ✔).
• The items in the “Help” menu change, de-
pending on the input signal or setting that you
have selected.
• If the problem is not solved, refer to
“Troubleshooting” (see pages  63 and  64).
• When selecting “sRGB” in “Picture Mode”, the
item “Color is faded or poor” is not displayed.
This means you cannot change...