Edimax Router Wireless VPN Broadband User Manual

 
Select an application from the Popular 
Applications selection. Once you have 
selected an application, select a location (1-
10) in the Copy to selection box and then 
click the Copy to  button. This will 
automatically list the Public Ports required for 
this popular application in the location (1-10) 
you’d specified. 
 Add Special Application  Fill in the Trigger Port, Trigger Type”,  “Public Port”, Public Type, Public Port and 
Comment of the setting to be added and 
then click Add. Then this...

 
ID Trigger Port Trigger Type   Public Port Public Type Comment 
1 28800 UDP 2300-2400, 47624TCP MSN Game Zone
2 6112 UDP 6112 UDP Battle.net 
 
In the example above, when a user trigger’s port 28800 (outbound) for 
MSN Game Zone then the router will allow incoming packets for ports 
2300-2400 and 47624 to be directed to that user.  Note: Only one LAN 
client can use a particular special application at a time. 
 2.6.4 UPnP Settings  With UPnP, all PCs in you Intranet w ill discover this router...

 
provided by UPnP can let applications that 
support UPnP smoothly connect to Internet 
sites without any incompatibility problem due to 
the NAPT port translation. 
  Click   at the bottom of the screen to save the above 
configurations. You can now configur e other advance sections or start 
using the router (with the advance settings in place) 
  2.6.5 ALG Settings You can select applications that need “Application Layer Gateway” to 
support. 
 
  Parameters        Default  Description  Enable  You...

 
Click   at the bottom of the screen to save the above 
configurations. You can now configur e other advance sections or start 
using the router (with the advance settings in place) 
 2.6.6 Static Routing  This router provides Static Routing function when NAT is disabled. With 
Static Routing, the rout er can forward packets according to your routing 
rules. The IP sharing function will not  work any more in Static Routing 
mode. 
Note:  The DMZ function of firewall will not  work if static routing is...

 
Hop Count The number of hops (routers) to pass through to 
reach the destination LAN. 
 Interface  The interface that go to the next hop (router).  Add a Rule  Fill in the Destination LAN IP, Subnet Mask”, 
“Default Gateway”, Hop Coun t and Interface of 
the rule to be added and then click Add. Then 
this rule of Static Routing will be added into the 
Static Routing Table below. If you find any typo 
before adding it and want to retype again, just 
click Reset and the fields will be cleared. 
 Remove...

 
  Parameters  Description  2.6.1 Access Control  Access Control allows you to specify which 
hosts users can or cannot have access to 
certain Internet applications   
 2.6.2 URL Blocking  URL Blocking allow you to specify which URLs  can not be accessed by users. 
 2.6.3 DoS  The Broadband routers firewall can block 
common hacker attacks and can log the attack 
activities. 
 2.6.4 DMZ   The DMZ function allows you to re-direct all 
packets going to your WAN port IP address to a 
particular IP...

 
   Parameters  Description  Deny If select “Deny” then all PCs will be allowed to 
access Internet accept for the PCs in the list 
below. 
 Allow  If select “Allow” then all PCs will be denied to 
access Internet accept for the PCs in the list 
below. 
 Filter client PCs by IP  Fill “IP Filterin g Table” to filter PC clients by IP.  Add PC You can click Add PC to add an access control 
rule for users by IP addresses. 
 Remove PC  If you want to remove some PC from the IP 
Filtering Table, select the...

 
Add PC  Fill in “Client PC MAC Address” and “Comment” of the PC that is allowed to access the Internet, and then click “Add”. 
If you find any typo before adding it and want to retype 
again, just click Reset and the fields will be cleared. 
 Remove PC  If you want to remove  some PC from the MAC Filtering 
Table, select the PC you want to remove in the table and 
then click Delete Selected. If you want remove all PCs 
from the table, just click Delete All button. If you want to 
clear the selection...

 
 Note: You need to give your LAN PC clients a 
fixed/static IP address  for the Access Control 
rule to work properly. 
 Client PC Service  You can block  the clients from accessing some 
Internet services by ch ecking the services you 
want to block. 
 Protocol  This allows you to select UDP, TCP or both 
protocol type you want to block. 
 Port Range  It can be assign up to five port ranges. The 
router will block clients from accessing Internet 
services that use these ports. 
 Apply Changes  Click...

 
2.7.2 URL Blocking  You can block access to some Web sites from particular PCs by entering a 
full URL address or just keyword of the Web site. 
 
  Parameters  Description  Enable URL Blocking  Enable/disable URL Blocking  Add URL Keyword  Fill in “URL/Keyword” and then click “Add”. You can enter the full URL address or the keyword of 
the web site you want to block. If you find any 
typo before adding it and want to retype again, 
just click Reset and the field will be cleared. 
 Remove URL Keyword...