Edimax Router Wireless VPN Broadband User Manual

 
connection. You can start using the router now, if you wish to use some of 
the advance features supported by this router see chapter 2, 3, 4. 
 1.4 PPTP  Select PPTP if your ISP requires the PPTP protocol to connect you to the 
Internet. Your ISP should provide all the  information required in this section. 
  Parameter   Description  Obtain an IP address  The ISP requires you to obtain an IP address by 
DHCP automatically before connecting to the PPTP 
server. 
 Use the following          The ISP...

 
User ID Enter the User Name provided by your ISP for the 
PPTP connection. Sometimes called a Connection 
ID  
 Password  Enter the Password provided by your ISP for the 
PPTP connection 
 PPTP Gateway  If your LAN has a PPTP gateway, then enter that PPTP  gateway IP address here. If you do not have a PPTP 
gateway then enter the ISP’s Gateway IP address 
above  
 Connection ID  This is the ID given by ISP. This is optional.  BEZEQ-ISRAEL  Select this item if you are using the service provided by...

 
computer when you are not using it. This function also 
may not work with some ISP. So please make sure this 
function can work properly when you use this function 
in the first time, especially your ISP charge you by time 
used. 
 Click  when you have finished the configuration above. 
Congratulations ! You have completed the configuration for the PPTP 
connection. You can start using the router now, if you wish to use some of 
the advance features  supported by this router see chapter 2, 3, 4. 
 1.5...

 
Type in this MAC address in this section or use the 
Clone MAC Address button to replace the WAN 
MAC address with the MAC address of that PC 
(you have to be using that PC for the Clone MAC 
Address button to work). To find out the PCs MAC 
address see Appendix A. (see Glossary for an 
explanation on MAC address) 
 Use the following      The ISP gives you a static IP to be used  IP address                 to connect to the L2TP server.  IP Address  This is the IP address that your ISP has given you...

 
 If you select “Manual”, the router will connect to ISP 
only when you click “Connect” manually from the 
Web user interface. The  WAN connection will not be 
disconnected due to the idle timeout. If the WAN line 
breaks down and latter links again, the router will not 
auto-connect to the ISP. 
 Idle Time Out  The WAN  idle timeout auto-disconnect function may not  work due to abnormal activities of some network 
application software, computer virus or hacker attacks from 
the Internet. For example,...

 
 Parameter   Description  User Name Enter the User Name provided by your ISP for 
the Telstra Big Pond connection  
 Password  Enter the Password provided by your ISP for 
the Telstra Big Pond connection 
 User deside login server  Select if you want to assign the IP of Telstra Big  Pond’s login  
manually server  manually.  Login Server The IP of the Login Server.   Click  when you have finished the configuration above. 
Congratulations ! You have completed the configuration for the Telstra Big 
Pond...

 
 If you have already configured the Quick Setup Wizard you do NOT need 
to configure anything thing in the General Setup screen for you to start 
using the Internet.  
 The General Setup contains advanced features that allow you to configure 
the router to meet your network’ s needs such as: Wireless, Address 
Mapping, Virtual Server,  Access Control, Hacker Attack Prevention, 
Special Applications, DM Z and other functions.  
 Below is a general description of what advance functions are available for...

 
2.4 Wireless  Setup the wireless LAN’s SSID, WEP key, MAC filtering.  2.5 QoS  You can setup the QoS bandwidth control policy.  2.6 NAT  You can configure the Address Mapping, Virtual Server and 
Special Applications functions in  this section. This allows 
you to specify what user/packet can pass your router’s NAT. 
 2.7 Firewall  The Firewall section allows you to configure Access Control,  Hacker Prevention and DMZ. 
 Select one of the above five General Setup selections and proceed to the...

 
2.1.1 Time Zone Select the time zone of the country you are 
currently in. The router will set its time based 
on your selection.  
 2.1.2 Password Settings  Allows you to select a password in order to  access the web-based management website. 
 2.1.3 Remote Management   You can sp ecify a Host IP address that can 
perform remote management functions. 
 Select one of the above three system settings selections and proceed to 
the manual’s relevant sub-section 
 2.1.1 Time Zone The Time Zone allows your...

 
Time Server Address  The router default the “Time Server Address” 
is “192.43.244.18” 
 Enable Daylight Savings  The router can also take Daylight savings into  account. If you wish to use this function, you 
must check/tick the enable box to enable your 
daylight saving configuration (below). 
 Start Daylight Savings Time Select the period in which you wish to start 
daylight Savings Time 
 End Daylight Savings Time  Select the period in which you wish to end 
daylight Savings Time 
 Click   at the...