Home > Edimax > Router > Edimax Router Wireless VPN Broadband User Manual

Edimax Router Wireless VPN Broadband User Manual

Here you can view all the pages of manual Edimax Router Wireless VPN Broadband User Manual. The Edimax manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 1

 
 
 
       
 
 
Wireless VPN Broadband Router      
User’s Manual 
 
 
0 

Page 2

 
Introduction ........................................................................\
................. 3 Features........................................................................\
........................ 3 Minimum Requirements ........................................................................\
 3 Package Content........................................................................\
.......... 3 Note........................................................................\...

Page 3

 
2.4.3.2 802.1x only........................................................................\
...... 44 2.4.3.3 802.1x WEP Static key ............................................................ 45 2.4.3.4 WPA Pre-shared key............................................................... 45 2.4.3.5 WPA Radius........................................................................\
.... 47 2.4.4 Access Control ........................................................................\
... 48 2.5...

Page 4

 
 Introduction  Congratulations on purchasing this Wireless Broadband Router. This 
Wireless Broadband Router is a cost-effective IP Sharing Router that 
enables multiple users to share the  Internet through an ADSL or cable 
modem. Simply configure your Internet  connection settings in the Wireless 
Broadband Router and plug your PC to the LAN port and youre ready to 
share files and access the Internet. As your network grows, you can 
connect another hub or switch to the router’s LAN ports, allowing...

Page 5

 
•  One User Manual / One Power Adapter / Other Accessories  Note The WAN  “idle timeout” auto-disconnect function may not work due to 
abnormal activities of some network ap plication software, computer virus 
or hacker attacks from the Internet . For example, some software sends 
network packets to the Internet in the background, even when you are not 
using the Internet. So please turn off your computer when you are not 
using it. This function also may not wo rk with some ISP. So please make 
sure...

Page 6

 
your original configurations will be replaced with the factory default 
settings) 
Front Panel  On the router’s front panel there are LED lights that inform you of the 
router’s current status. Below is an explanation of each LED and its 
description. 
 
           LED          Light Status                 Description  PWR               ON   Router’s power supply is on  WAN  10/100M       ON                   WAN port 100Mbps is connected                       Off                   WAN port 10Mbps is...

Page 7

 
  Setup Diagram  Figure 1.2 below shows a typical setup for a Local Area Network (LAN).  
  Figure 1.2 Getting started   This is a step-by-step instruction on how to start using the router and get 
connected to the Internet. 
 1)  Setup your network as shown in  the setup diagram above (fig 1.2).   2)  You then need to set your LAN PC clients so that it can obtain an IP 
address automatically. All LAN clients require an IP address. Just like an 
address, it allows LAN clients to find one another. (If...

Page 8

 
Windows 95/98/Me, 2b) Windows XP, 2c) Windows 2000  and 2d) 
Windows NT .  
2a) Windows 95/98/Me  1. Click the  Start button and select  Settings, then click  Control Panel .  
The  Control Panel  window will appear. 
2. Double-click  Network icon. The Network  window will appear. 3. Check your list of Network Components . If TCP/IP is not installed,  
click the  Add button to install it. If TCP/IP is installed, go to  step 6. 
4. In the  Network Component Type  dialog box, select Protocol  and click...

Page 9

 
8.  Reboot the PC. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. 
 Note :Please make sure that the Broadband router’s DHCP server is the   
only DHCP server  available on your LAN. 
Once you’ve configured your PC to obtain an IP address 
automatically, please proceed to Step 3  
 2b) Windows XP  1.  Click the  Start button and select  Settings, then click  Network 
Connections.  The Network Connections   window will appear. 
2. Double-click  Local Area...

Page 10

 
Once you’ve configured your PC to obtain an IP address 
automatically, please proceed to Step 3  
2c) Windows 2000  1. Click the  Start button and select  Settings, then click  Control Panel . The 
Control Panel  window will appear. 
2. Double-click  Network and Dial-up Connections icon. In the  Network 
and Dial-up Connection   window, double-click Local Area Connection  
icon. The  Local Area Connection  window will appear. 
3. In the  Local Area Connection  window, click the Properties button. 4....
Start reading Edimax Router Wireless VPN Broadband User Manual

Related Manuals for Edimax Router Wireless VPN Broadband User Manual

All Edimax manuals