Edimax Router BR-6424n User Manual

 
81
It’s recommends to select this band to maximize 
compatibility. 
ESSID  This is the name of broadband router. You can 
type any alphanumerical characters here, 
maximum 32 characters. ESSID is used to 
identify your own broadband router from 
others when there are other broadband routers 
in the same area. Default SSID is ‘default’, it’s 
recommended to change default ESSID value 
to the one which is meaningful to you, like 
myhome, office_room1, etc. 
Channel Number  Please select a channel from...

 
82
Where you can setup Channel Width in ” 
Auto 20/40MHz ” to get good wireless 
signal. 
 
 
 
 
 
 
 
 
 
 
When you finished with the settings in this page, you can click ‘Apply’ 
button to save changes you made in this page, or you can click ‘Cancel’ 
to discard changes. After you click ‘Apply’ button, you’ll see the 
following messages: 
 
 
TIPS: You can try to change channel number to another one if you 
think the data transfer rate is too slow, or keep having problem while 
transferring the...

 
83
 
Please click ‘Apply’ to save changes you made and restart the broadband 
router, this requires about 30 seconds and the broadband router will stop 
responding (this is normal and is not malfunction). You can reconnect to 
this broadband router and continue on other settings later.   
 
You can click ‘Continue’ to continue on other settings without restart the 
broadband router, however, the changes you made will not take effect 
before you restart the broadband router.  

 
84
3-4-1-2 Station-Infrastructure 
 
In Station-Infrastructure mode, you can select a wireless access point to 
become its wireless client, and also acts as wireless access point to serve 
other wireless clients. If you have the access privilege of other wireless 
access point nearby, and you wish to use that access point to access 
Internet, you can use this connection type: 
Note : You will not get this mode, when you enable WISP. 
 
 
 
Here are descriptions of every setup items: 
 
Item Name...

 
85
11Mbps for 802.11b clients, and maximum 
54Mbps for 802.11g clients). 
 
2.4 GHz (G): 2.4GHz band, only allows 
802.11g wireless network client to connect this 
router (maximum transfer rate 54Mbps). 
 
2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless clients. 
It’s recommends to select this band to maximize 
compatibility. 
ESSID  This is the name of broadband router. You can 
type any alphanumerical characters here, 
maximum 32 characters. ESSID is used to 
identify...

 
86
MAC’ button to use the MAC address of your 
computer (the one you used to connect to the 
web management interface currently). 
Auto MAC Clone  If you wish to use the MAC address of wired 
LAN interface of this broadband router, 
select ‘Enable’, or select ‘Disable’ to not to 
use the MAC address of the wired LAN 
interface of this broadband router. 
 
 
When you finished with the settings in this page, you can click ‘Apply’ 
button to save changes you made in this page, or you can click ‘Cancel’...

 
87
3-4-1-3 AP Bridge-Point to Point 
 
In this mode, you can use this broadband router as a wireless network 
bridge and let all computers connected to the LAN ports of both wireless 
access points to communicate with each other. This mode supports only 
one wireless access point peer. 
 
Please note that when you select this mode, this broadband router will act 
as wireless bridge only, and will not accept other wireless clients. 
 
Also, you can connect to the wireless access point with the same...

 
88
router (maximum transfer rate 300Mbps). 
 
2.4 GHz (B+G): 2.4GHz band, only allows 
802.11b and 802.11g wireless network client to 
connect this router (maximum transfer rate 
11Mbps for 802.11b clients, and maximum 
54Mbps for 802.11g clients). 
 
2.4 GHz (G): 2.4GHz band, only allows 
802.11g wireless network client to connect this 
router (maximum transfer rate 54Mbps). 
 
2.4 GHz (B+G+N): 2.4GHz Band, Allows 
802.11b, 802.11g, and 802.11N wireless clients. 
It’s recommends to select this band to...

 
89
 
 
Please click ‘Apply’ to save changes you made and restart the broadband 
router, this requires about 30 seconds and the broadband router will stop 
responding (this is normal and is not malfunction). You can reconnect to 
this broadband router and continue on other settings later.   
 
You can click ‘Continue’ to continue on other settings without restart the 
broadband router, however, the changes you made will not take effect 
before you restart the broadband router.  

 
90
3-4-1-4 AP Bridge-Point to Multi-Point 
 
In this mode, you can use this broadband router as a wireless network 
bridge and let all computers connected to the LAN ports of all wireless 
access points to communicate with each other. This mode supports up to 
four wireless access point peers. 
 
Please note that when you select this mode, this broadband router will act 
as wireless bridge only, and will not accept other wireless clients. 
 
Also, you can connect to the wireless access point with the...