Edimax Router BR-6424n User Manual

 
41
2-4-5 Using L2TP xDSL as broadband connection type 
 
If your ISP requires you to use L2TP (Layer-2 Tunneling Protocol) to 
establish connection, you can select this connection type to establish 
Internet connection. L2TP is another popular connection method for 
xDSL and other Internet connection types, and all required setting items 
are the same with PPTP connection. 
 
Like PPTP, there are two kinds of required setting, we’ll start from ‘WAN 
Interface Settings’: 
 
 
 
Please select the type of...

 
42
 
 
Here are descriptions of every setup items: 
 
Item Name Description 
User ID Please input user ID (user name) assigned by 
your Internet service provider here. 
Password Please input the password assigned by your 
Internet service provider here. 
L2TP Gateway Please input the IP address of L2TP gateway 
assigned by your Internet service provider 
here. 
MTU Please input the MTU value of your network 
connection here. If you don’t know, you can use 
default value. 
Connection Type Please select...

 
43
Idle Time Out Please specify the time to shutdown internet 
connect after no internet activity is detected in 
minute(s). This option is only available when 
connection type is ‘Connect on Demand’. 
 
If you wish to select another connection type as broadband connection 
type, click ‘Back’; or you can click ‘OK’ to finish with quick setup. 
You’ll see the following messages: 
 
 
 
Please click ‘Apply’ to save changes you made and restart the broadband 
router, this requires about 30 seconds and the...

 
44
2-4-6 Using Telstra Big Pond as broadband connection type 
 
This connection type only works for Telstra big pond network service in 
Australia. DO NOT select this connection type if you’re not using Telstra 
big pond network service. 
 
 
 
Here are descriptions of every setup items: 
 
Item Name Description 
User Name  Please input the user name assigned by Telstra.
Password  Please input the password assigned by Telstra. 
User device login 
server manually Check this box to choose login server by...

 
45
router, this requires about 30 seconds and the broadband router will stop 
responding (this is normal and is not malfunction). You can reconnect to 
this broadband router and continue on other settings later. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

 
46
2-4-7 WISP (Wireless ISP Connection mode) 
 
You can connect with ISP via the router wirelessly, because the router 
provides WISP connection mode. Click “ Enable “ and “ Select Site 
Survey “ button   
 
Here you will find many Wireless Access Points as follows. To Choose an 
Access Point which you would like connect , then click “Select” button 
and “Done” . 
 
 
Here you will see the Access Point which you select.   
 
Here we provide WEP and PWA-PSK security settings for you to connect 
with ISP...

 
47
made and restart the broadband router, this requires about 30 seconds and 
the broadband router will stop responding (this is normal and is not 
malfunction). You can reconnect to this broadband router and continue on 
other settings later. 
 
 
 
  

 
48
Chapter III: General Setup 
 
The ‘General Setup’ is for you to setup “System, WAN, LAN, Wireless, 
and others ( Advance settings ) “. 
 
Please follow the following instructions to use ‘General Setup’ menu: 
 
1. Click ‘General Setup’ after logged in. 
 
  

 
49
2. Five submenus will appear: 
 
 
System - Basic system settings (please go to chapter 3-1) 
 
WAN - Setup WAN port manually (please go to chapter 3-2) 
 
LAN - Setup LAN port manually (please go to chapter 3-3) 
 
Wireless - Setup wireless interface manually (please go to chapter 3-4) 
 
Advance Settings - Setup advanced settings of this broadband router 
(Please go to chapter 3-5) 
  

 
50
3-1 System 
 
You can setup basic system settings of this broadband router in ‘System’ 
menu: 
 
 
 
Please select the setting item you wish to set, then click ‘Apply’ button to 
proceed. You can also click ‘Previous’ button to back to ‘System’ menu. 
 
3-1-1 Time Zone 
 
You can change the time zone settings of this broadband router. It’s 
important to have correct date and time setting if you need to read system 
log and use build-in firewall functions.