Dukane Projector 6430 User Manual

							64
English ...
User Controls
1.  Turn on DHCP to allow the DHCP server to automatically assign 
an IP, or manually enter the required network information.
ENTER CURRENT SECURITY CODE
SECURITY KEYWORD
EXIT
ENTER INVALID-KEYWORD TOO SHORTNETWORK
NETWORK STATUS
DISCONNECT
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
APPLY OFF
2. 
Then choose apply and press ENTER  button to complete the 
configuration process.
3.  Open your web browser and type in from the OSD LAN screen 
then the web page will display as below:
How to use web browser to control your projector
	When you used the 
projector IP address, 
you can not link to 
your service server.
	 PJLink:  Set a 
password for PJLink. 
PJLink is a 
standardization 
of protocol used 
for controlling 
projectors of different 
manufacturers. This 
standard protocol is 
established by Japan 
Business Machine and 
Information System 
Industries Association 
(JBMIA) in 2005.
The projector supports 
all the commands of 
PJLink Class 1.
	 AMX BEACON:
Turn on or off for 
detection from AMX 
Device Discovery 
when connecting 
to the network 
supported by AMX's 
NetLinx control 
system.
	 CRESTRON ROOM-
VIEW compatibility:
The projector 
supports CRESTRON 
ROOMVIEW, 
allowing multiple 
devices connected 
in the network to 
be managed and 
controlled from 
a computer or a 
controller.
For more information, 
visit http://www.
crestron.com 
						

							65... English
User Controls
4. Open “ Projector Status and Control” to control your projector. 
 
When making a direct connection from your computer to the projector
Step 1: Find an IP Address (default:192.168.0.10) from LAN function of projector.
192.168.0.10
Step 2: Select apply and press the ENTER button on the remote control or the control panel to submi t function or press the MENU button on the remote control or 
the control panel  to exit.
Step 3: To open Network Connections, click  Start
, click  Control Panel
, click Network 
and Internet Connections , and then click Network Connections
. Click the 
connection you want to configure, and then, under  Network Tasks 
 , click 
Change settings of this connection . 
						

							66
English ...
User Controls
Step 4: On the General  tab, under  This connection uses the following items
, click 
Internet Protocol (TCP/IP) , and then click “Properties.”
Step 5: Click Use the following IP address
, and type in as below:
1) IP address: 192.168.0.20 
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.1
Step 6: To open Internet Options, click IE web browser, click Internet Options, click the  Connections tab  and click “LAN Settings...” 
						

							67... English
User Controls
Step 7: The  Local Area Network (LAN) Setting
 dialog box appears, 
In the  Proxy Server 
area , cancel the  Use a proxy server for your LAN check box
., then click “OK” 
button twice.
Step 8: Open your IE and type in the IP address of 192.168.0.10 in the URL then press  the ENTER button  key. 
						

							68
English ...
User Controls
Step 9: Open “Projector Status and Control” to control your projector. 
						

							69... English
User Controls
SCREENIMAGE SETTINGOPTIONS
GENERAL LAMP SETTINGS
INPUT SEARCH
INPUT FAN MODE
INFORMATION HIDE
BACKGROUND COLOR
RESET
COMPUTERSELECT
EXITMOVE MOVE
BLUE
OFF OFF
AUTO
ID DISPLAY OFF
 INPUT SEARCH
 ON: The projector will search for other signals if the current 
input signal is lost. 
 OFF: The projector will only search current input connection.
INPUT SEARCH
OFF
ON
  INPUT
Use this option to enable / disable input sources. Press ENTER to 
enter the sub menu and select which sources you require. Press 
the ENTER button to finalize the selection. The projector will not 
search for inputs that are not selected. 
INPUT
COMPUTERHDMI1/MHL
HDMI2
VIDEO
OPTIONS | 
GENERAL
6433, 6433W, 6430HD 
						

							70
English ...
User Controls
INPUT
COMPUTERHDMI1
HDMI2
VIDEO
  FAN MODE
  AUTO: The built-in fans automatically run at a variable speed 
according to the internal temperature.
  HIGH ALTITUDE: The built-in fans run at high speed.
Select this option when using the projector at altitudes 
approximately 2500 feet/760 meters or higher.
FAN MODE
AUTO
HIGH ALTITUDE
  INFORMATION HIDE
 ON: Choose “ON” to hide the info message.
 OFF: Choose “OFF” to show the “SEARCHING” message.
INFORMATION HIDE
OFFON
  ID DISPLAY
Use this feature to display the ID number which is displayed when 
the "ID SET" button is pressed on the remote control.
ID DISPLAY
OFFON
6430, 6430W 
						

							71... English
User Controls
	(*) Except 
“LANGUAGE”, 
“LOGO”,  
“NETWORK”, 
“SECURITY”, 
“FAN MODE”, 
“BACKGROUND 
COLOR”, 
“LAMP LIFE 
REMAINING”, 
“LAMP HOURS 
USED”, and 
“STANDBY 
MODE”.
  BACKGROUND COLOR
Use this feature to display a “BLACK”or “BLUE” screen when no 
signal is available.
BACKGROUND COLOR
BLACKBLUE
  RESET
Choose “YES” to return the display parameters on all menus to 
the factory default settings.  (*)
ARE YOU SURE
YES NO 
						

							72
English ...
User Controls
SCREENIMAGE SETTING
OPTIONS
GENERAL LAMP SETTINGS
LAMP LIFE REMAINING LAMP HOURS USED
ECO MODE
LAMP LIFE REMINDER
COMPUTERSELECT
EXITMOVE MOVE
OFF OFF
CLEAR LAMP HOURS
  LAMP LIFE REMAINING
Showing the Lamp life.
 LAMP HOURS USED
Display the projection time.
 ECO MODE
Choose “ECO” to dim the projector lamp which will lower power 
consumption and extend the lamp life. Choose “OFF” to return to 
normal mode.
ECO MODE
OFFECO
OPTIONS 
| LAMP 
SETTINGS 
						

							73... English
User Controls
 LAMP LIFE REMINDER
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed.  
The message will appear when the lamp has reached the end of its 
life. 
LAMP LIFE REMINDER
OFFON
USE THE SPECIFIED LAMP
FOR SAFETY AND PERFORMANCE. ARE YOU SURE ? YES NO
 CLEAR LAMP HOURS
Reset the lamp hour counter after replacing the lamp.