Dukane Projector 6430 User Manual
Have a look at the manual Dukane Projector 6430 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Dukane manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
54 English ... User Controls CEILING FRONT: When selected, the image will turn upside down. CEILING REAR This is the default selection. The image will appear reversed in upside down position. ORIENTATION DESKTOP FRONT CEILING FRONT DESKTOP REAR CEILING REAR HDMI SETTINGS Use this feature to set HDMI1/MHL or HDMI2 HDMI SETTINGS AUTO COMPUTER SELECT EXIT MOVE AUDIO SELECT VIDEO LEVEL HDMI1 HDMI1 HDMI2 VIDEO LEVEL: Select “AUTO” to automatically detect video level. If automatic detection may not work well, select “NORMAL” to disable the “ENHANCED” feature of your HDMI equipment or select “ENHANCED ” to improve image contrast and increase detail in the dark areas. VIDEO LEVEL AUTO NORMAL ENHANCED “HDMI SETTING” is only supported under HDMI source.
55... English User Controls AUDIO SELECT: Use this function to select the audio souce from “HDMI1/MHL ”, “HDMI2”or “COMPUTER ”. AUDIO SELECT HDMI1/MHLCOMPUTER AUDIO SELECT HDMI2COMPUTER MUTE Choose “ON” to turn mute on. Choose “OFF” to turn mute off. MUTE OFF ON VOLUME Press the button to decrease the volume. Press the button to increase the volume. VOLUME EXIT ADJUST EXIT
56 English ... User Controls SCREENIMAGE SETTINGOPTIONS GENERAL SIGNAL PHASE CLOCK H. POSITION V. POSITION COMPUTERSELECT EXITMOVE MOVE ADVANCED PHASE Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it. PHASE EXIT ADJUST EXIT CLOCK Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image appears to flicker vertically. CLOCK EXIT ADJUST EXIT “SIGNAL” is only supported in Analog VGA (RGB) signal. SETTING | SIGNAL
57... English User Controls H. POSITION Press the button to move the image left. Press the button to move the image right. H. POSITION EXIT ADJUST EXIT V. POSITION Press the button to move the image down. Press the button to move the image up. V. POSITION EXIT ADJUST EXIT
58 English ... User Controls SCREENIMAGE SETTINGOPTIONS GENERAL SIGNAL LOGO NETWORK CLOSED CAPTION SECURITY TEST PATTERN OFF COMPUTER SELECT EXIT MOVE MOVE ADVANCED OFF OFF LOGO Use this function to display the startup screen (NEC logo). ON: Displays the NEC logo. OFF: Not display the NEC logo. LOGO OFFON NETWORK Please see the pages 64-68. CLOSED CAPTION Use this function to enable closed caption and activate the closed caption menu. Select an appropriate closed captions option: OFF, CC1, CC2, CC3, CC4, T1, T2, T3 and T4. CLOSED CAPTION OFF When “NORMAL” is selected for “STANDBY MODE” from the menu, the projector cannot be controlled in standby mode from external equipment. SETTING | ADVANCED
59... English User Controls SECURITY OFF: Choose “OFF” to be able to switch on the projector without password verification. ON: Choose “ON” to use security verification when turning on the projector. SECURITY OFFON ENTER CURRENT SECURITY CODE SECURITY KEYWORD EXIT ENTER INVALID-KEYWORD TOO SHORT First Time: 1. The default password : puqt 2. Use the remote to enter your password, and then press ENTER to confirm your password. TEST PATTERN Press ENTER to make the selection. Then press MENU or EXIT to close the sub menu. The available test pattern is GRID.
60 English ... User Controls SECURITY ADJUST EXIT SECURITY OFF SECURITY TIMER CHANGE PASSWORD SELECT MOVE SECURITY TIMER Use this function to set how long (MONTH/DAY/HOUR) the projector can be used. Once this time has elapsed you will be requested to enter your password again. MONTH EXIT MOVE ADJUST SECURITY TIMER DAY HOUREXIT The “SECURITY TIMER” will restart to count down when the projector is turned off and then turned back on. CHANGE PASSWORD 1. Press ENTER to enter SECURITY KEYWORD setting. 2. The password has to be combination of , , , direc- tion keys and must include 4 to 10 characters. Current password ENTER CURRENT SECURITY CODE SECURITY KEYWORD EXIT ENTER INVALID-KEYWORD TOO SHORT 3. Use number buttons on the remote control, to enter your old password and then press ENTER to confirm your password. Input new password ENTER NEW SECURITY CODE CHANGE PASSWORD EXIT ENTER SETTING | ADVANCED | SECURITY The default password is puqt (first time).
61... English User Controls 4. Use direction keys, to enter your new password and then press ENTER to confirm your password. Confirm new password CONFIRM NEW SECURITY CODE CHANGE PASSWORD EXIT ENTER 5. Enter the new password again and press ENTER to confirm. If the incorrect password is entered 3 times, the projector will automatically shut down. (When turn on the projector.) If you have forgotten your password, please contact your local office for support.
62 English ... User Controls NETWORK NETWORK STATUS DISCONNECT DHCP IP ADDRESS SUBNET MASK GATEWAY APPLY OFF NETWORK STATUS Display the network connection status. (default: DISCONNECT) DHCP Use this function to select your desired startup screen. If you change the setting from one to another, when you exit the OSD menu, the new setting will take effect on next open. ON: Assign an IP address to the projector from an external DHCP server automatically. OFF: Assign an IP address manually. DHCP OFF ON IP ADDRESS Select an IP address. IP ADDRESS EXITADJUST SELECT MOVE SETTING | ADVANCED | NETWORK
63... English User Controls SUBNET MASK Select subnet mask number. SUBNET MASK ADJUST SELECT MOVE EXIT GATEWAY Select the default gateway of the network connected to the projector. GATEWAY ADJUSTMOVE SELECT EXIT APPLY Press ENTER to apply the selection.