Dukane Projector 6430 User Manual

							4
English ...
Introduction
Product Features
■    
■ 0.5 W in standby condition with energy saving technology   
Selecting [NORMAL] for [STANDBY MODE] from the menu 
can put the projector in power-saving mode that consumes 
only 0.5 W (typical value).
■ Two HDMI input ports provide digital signal  
The two HDMI inputs provide HDCP compatible digital 
signals. The HDMI input also supports audio signal.
■ Quick Power Off, Direct Power Off  
The projector can be put away immediately after the projector 
is powered on. No cool down period is required after the 
projector is turned off from the remote control or cabinet 
control panel.  
The projector has a feature called “Direct Power Off”. This 
feature allows the projector to be turned off (even when 
projecting an image) by using the Main Power Switch or 
disconnecting the AC power supply. To turn off the AC power 
supply when the projector is powered on, use a power strip 
equipped with a switch and a breaker.
■ 8 W speaker for an integrated audio solution  
Powerful 8 watt stereo speakers provide volume need for 
large rooms.
■ 3D features supported  
The projector can support following format by DLP® Link. 
- HDMI 3D  
- HQFS 3D
 
■ Integrated RJ-45 connector for wired networking capability   
The customer can control the projector by own computer via 
Wired LAN. 
■ Preventing unauthorized use of the projector  
Enhanced smart security settings for keyword protection, 
cabinet control panel lock, security slot, and security chain 
opening to help prevent unauthorized access, adjustments and 
theft deterrence.  
Supports input of High resolution Full HD (1920 x 1080) signal 
						

							5... English
Introduction
Remote ControlProjector
Package Overview
This projector comes with all the items shown below. Check 
to make sure your unit is completed. Contact your dealer 
immediately if anything is missing.
		
Batteries (AAAx2)
 
Lens Cap
Security Label
Computer Cable (VGA) 
						

							6
English ...
Introduction
1.  Exhaust Vent
2. Focus Ring
3. Control Panel
4. Zoom Lever
5. Intake Vent
6. Security Lock Hunger 
7. Remote Control Sensor
8. Lens
Projector
Product Overview
9. Tilt Foot 
       Release Button
10. Lens Cap
11. Ports
12. Tilt Foot
13. KensingtonTM Lock Port
14. Monaural Speaker (8W)
15. Lamp Cover
234
5
1
6
7
8
9
11
12
13
10
14
15 
						

							7... English
Introduction
Ports
1. SERVICE Port (for service purpose only)
2. LAN Port (RJ-45)
3. HDMI 2 IN Port
4. HDMI 1/MHL IN or 
       HDMI 1 Port
5. COMPUTER IN  Port
6. MONITOR OUT Port (separate
       sync signal only)
7.  PC CONTROL Port
8. VIDEO IN Port
9. AUDIO IN L/R  Port
10. AUDIO IN Jack (3.5mm
       mini jack)
11. KensingtonTM Lock  Port
12.  AUDIO OUT Port  
(This port does not support 
Headphone terminal)
13.  AC IN Terminal
1
11
102345678
13
6433/6433W/6430HD
12
9
1
11
102345678
13
6430/6430W
12
9 
						

							8
English ...
Introduction
Control Panel
6433/6433W/6430HD
6430/6430W
10
10
24
5
6789
13
12
1011
1124
5
6789
13
12         
						

							9... English
Introduction
1VOLUME - Decrease speaker volume.
2
Four   
Directional 
Select Keys -Use  ,  ,  or  to select items 
or make adjustments to your 
selection.
-Use as Quick Keys. Please see the 
page  13.
3
VOLUME + Increase speaker volume.
4 LAMP LED Indicate the projector’s lamp  status.
5 STATUS LED Indi cate the projector’s various   status.
6 POWER LED Indicate the projector’s status. 7
POWER Turn the  projector on/off.  Refer to the “Power On/Off the 
Projector” section on page s 29-30.
8 EXIT Press to exit the OSD menu.
9 SOURCE Press “SOURCE” to select an  input signal.
MENU Press “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation.
11
KEYSTONE
Correction Adjust the image to compensate 
for distortion caused by tilting the 
projector (vertical ± 40 degrees).
12 ENTER Confirm your section of items in 
sub menu operation.
 For controlling the 
speaker volume, use 
 
or 
 .
 
also support horizontal 
keystone correction.  
Use 
 button for 
adjusting horizontal 
keystone. 
   6433,6433W
and 6430HD. 
						

							10
English ...
Introduction
Remote Control
1POWER ONPower on the projector. Please 
see the “Power On/Off the 
Projector” section on pages 29-
30.
2 POWER OFF Power off the projector. Please 
see the “Power On/Off the 
Projector” section on pages 29-
30.
3
4
5 18
10
11
13 19
24
26
28
30 27
12
1162
8
23
21
9
25
14
29
31
17
15
67
20
22 
						

							11... English
Introduction
3COMPUTER  1 Press “1” to choose Computer IN 
connector.
4 COMPUTER  2  No function.
5 HDMI  1 Press “4” to choose  HDMI 1/
MHL IN connector (*1) or 
HDMI1 connector (*2).
6 VIDEO Press “VIDEO” to choose VIDEO  
IN connector.
7 USB  A No function.
8 ID SET Press ID SET for indicating the 
ID number.
9 AV-MUTE Momentarily turn off/on the 
audio and video.
10 MENU Press “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation
11 D-ZOOM Zoom in/out the projected 
image. 
12 KEYSTONE  
Correction Adjust the image to compensate 
for distortion caused by tilting 
the projector.
13 ECO Dim the projector lamp which 
will lower power consumption 
and extend the lamp life. Please 
see the page 72.
14 HELP This function ensures easy setup 
and operation.
15 FOCUS/
ZOOM No function.
16 SOURCE Press “SOURCE” to select the 
desired input source.
17 AUTO ADJ. Automatically synchronize the 
projector to the input source.
	*1: Supported 
	*2: Supported in 
in 6433, 6433W 
and 6430HD Models.
6430, 6430W models. 
						

							12
English ...
Introduction
18HDMI  2 Press “5” to choose  HDMI 2 IN 
connector.
19 DISPLAY 
PORT No function.
20 USB  B No function.
21 Number Button No function.
22 LAN No function.
23 CLEAR Clear the password while you 
input the password.
24 FREEZE Freeze To pause the screen 
image. Press again to resume the 
screen image.
25 EXIT Exit the settings.
26 ENTER Confirm your section of items in 
sub menu operation.
27
Four  
Directional 
Select Buttons -Use  or  or  or  to select 
items or make adjustments to 
your selection. When the image 
is magnified by using the D-
ZOOM + button, the 
 ,  ,  or 
 button moves the image. 
- Use as Quick Keys. Please see 
the page 13.
28 PAGE No function.
29 PICTURE 
Mode Select the Picture mode from 
PRESENTATION, HIGH-
BRIGHT, VIDEO, MOVIE, sRGB, 
BLACKBOARD, USER1, and 
USER2.
30 VOL. +/- Increase/decrease speaker 
volume.
31 ASPECT Use this function to choose your 
desired aspect ratio. Please see 
the page 49.
	When the 
demagnified image 
is displayed, the  
 ,  ,  or  button is not available to move 
the image. 
						

							13... English
Introduction
Quick Key Activate Behavior
Quick keys are available when no OSD is displayed.
The Quick Keys can be accessed on Control Panel or remote control       
(
). 
The behavior of the Quick Keys is as described in the following tables.
6430/6430W
Quick KeyFunction Activate 
Condition
LEFT (
)/
RIGHT (
)Pop Volume OSD and allow user to adjust. No OSD Display.
UP (
)/ DOWN ()
Pop Vertical Keystone OSD and allow user 
to adjust.
6433/6433W/6430HD
Quick KeyFunction Activate 
Condition
LEFT (
)/
RIGHT (
)Pop Volume OSD and allow user to adjust.
No OSD Display.
UP (
)No function.
DOWN (
)
Pop Hrizontal + Vertical Keystone OSD 
allow user to choose adjust horizontal or 
vertical keystone. Use the 
 button on the 
control panel or the KEYSTONE button on 
the remote control