Dukane Imagepro 9100hc D-ila Multimedia Projector Users Manual
Here you can view all the pages of manual Dukane Imagepro 9100hc D-ila Multimedia Projector Users Manual. The Dukane manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Basic Operations
Using the Quick Alignment function
The Quick Alignment function automatically adjusts (sets) the screen set-
tings of the image input from the [PC1] or [PC2] input terminal.
•This can only be performed with the remote control.
Press the [QUICK ALIGN.] (Quick Alignment) button.
•During automatic alignment, “QUICK ALIGN...” appears on the screen,
and disappears after alignment is complete.
Notes
•The Quick Alignment function only works when computer sig-
nals are input into either the...](http://img.usermanuals.tech/thumb/5762/88798/w300_dukane-imagepro-9100hc-manual_d-30.png "Page 31
31
Basic Operations
Using the Quick Alignment function
The Quick Alignment function automatically adjusts (sets) the screen set-
tings of the image input from the [PC1] or [PC2] input terminal.
•This can only be performed with the remote control.
Press the [QUICK ALIGN.] (Quick Alignment) button.
•During automatic alignment, “QUICK ALIGN...” appears on the screen,
and disappears after alignment is complete.
Notes
•The Quick Alignment function only works when computer sig-
nals are input into either the...")
31 Basic Operations Using the Quick Alignment function The Quick Alignment function automatically adjusts (sets) the screen set- tings of the image input from the [PC1] or [PC2] input terminal. •This can only be performed with the remote control. Press the [QUICK ALIGN.] (Quick Alignment) button. •During automatic alignment, “QUICK ALIGN...” appears on the screen, and disappears after alignment is complete. Notes •The Quick Alignment function only works when computer sig- nals are input into either the...
Page 32
32 Adjustments and Settings Using Menus The menus displayed on the screen are used to setup the projector and perform adjustments. The Menu Structure When video input is selected Notes •The display language of the menus is set to “English” when the projector is bought. The display language can be se- lected from among 8 languages. (☞ page 39) However, certain phrases and nouns, etc., are displayed only in English. •The menu screen for HDCP compatible signal input is the same as when PC input is...
Page 33
33 Adjustments and Settings Using Menus When PC input is selected Notes •The display language of the menus is set to “English” when the projector is bought. The display language can be se- lected from among 8 languages. (☞ page 39) However, certain phrases and nouns, etc., are displayed only in English. •The menu screen for HDCP compatible signal input is the same as when PC input is selected. A GBR ENTER LowStd HighSTBP 12 123 A1234 hCH.0 1280 X 1024 63.98kHz 60.02 HzPC1 GBR A 12 12 1 12 12 ENTERENTER...
Page 34
34 Adjustments and Settings Using Menus When no image signal is inputted Notes •The display language of the menus is set to “English” when the projector is bought. The display language can be se- lected from among 8 languages. (☞ page 39) However, certain phrases and nouns, etc., are displayed only in English. •The menu screen for HDCP compatible signal input is the same as when PC input is selected. A GBR ENTER ENTER LowStd HighSTBP 12 123 Image adj. Set up Logo Options Language InformationPosition...
Page 35
![Page 35
35
Adjustments and Settings Using Menus
The Menu Operation Buttons
The menus are accessed and operated using the following buttons on
the projector/remote control:
Button
Main unit Remote control unitFunction
Displays the main menu on the
screen.
•When the main menu is displayed,
press to exit the menu mode.
Confirm the selected item on main
menu.
Press to shift to the “Set up” screen
of the selected item against which
[ENTER] is displayed.
Press to return to the previous menu.
• While the main menu is...](http://img.usermanuals.tech/thumb/5762/88798/w300_dukane-imagepro-9100hc-manual_d-34.png "Page 35
35
Adjustments and Settings Using Menus
The Menu Operation Buttons
The menus are accessed and operated using the following buttons on
the projector/remote control:
Button
Main unit Remote control unitFunction
Displays the main menu on the
screen.
•When the main menu is displayed,
press to exit the menu mode.
Confirm the selected item on main
menu.
Press to shift to the “Set up” screen
of the selected item against which
[ENTER] is displayed.
Press to return to the previous menu.
• While the main menu is...")
35 Adjustments and Settings Using Menus The Menu Operation Buttons The menus are accessed and operated using the following buttons on the projector/remote control: Button Main unit Remote control unitFunction Displays the main menu on the screen. •When the main menu is displayed, press to exit the menu mode. Confirm the selected item on main menu. Press to shift to the “Set up” screen of the selected item against which [ENTER] is displayed. Press to return to the previous menu. • While the main menu is...
Page 36
![Page 36
36
The Procedure for Menu Operation
1.Press the [MENU] button
The main menu is displayed on the screen.
4.Press the cursor buttons (/) to select an adjustment
item
•Adjustment item names displayed in pale cannot be selected.
5.Press the cursor buttons ( / ) to change the setting
value
6.To exit after the adjustment, press the [EXIT] button
•Each time you press the button, the menu returns to the previous
one.
7.Repeat procedures 2 to 6 to set other items
After all adjustments are done,
Press the...](http://img.usermanuals.tech/thumb/5762/88798/w300_dukane-imagepro-9100hc-manual_d-35.png "Page 36
36
The Procedure for Menu Operation
1.Press the [MENU] button
The main menu is displayed on the screen.
4.Press the cursor buttons (/) to select an adjustment
item
•Adjustment item names displayed in pale cannot be selected.
5.Press the cursor buttons ( / ) to change the setting
value
6.To exit after the adjustment, press the [EXIT] button
•Each time you press the button, the menu returns to the previous
one.
7.Repeat procedures 2 to 6 to set other items
After all adjustments are done,
Press the...")
36 The Procedure for Menu Operation 1.Press the [MENU] button The main menu is displayed on the screen. 4.Press the cursor buttons (/) to select an adjustment item •Adjustment item names displayed in pale cannot be selected. 5.Press the cursor buttons ( / ) to change the setting value 6.To exit after the adjustment, press the [EXIT] button •Each time you press the button, the menu returns to the previous one. 7.Repeat procedures 2 to 6 to set other items After all adjustments are done, Press the...
Page 37
![Page 37
37
Adjustment and Setting Using Menus
3“Set up” menu
Use this menu to set the basic Tracking and Positioning settings of a
picture image. Items that can be adjusted via the “Set up” menu are
shown below.
•Displaying items differ depending on whether Video input or PC input
is selected.
When Video input is selected
Adjustment item (press/)Adjustment content (press/ )
“Position”Adjusts the position of the image and
menu display.
[Press the [ENTER] button to enter the
“Position” menu 4.
“Deinterlace”...](http://img.usermanuals.tech/thumb/5762/88798/w300_dukane-imagepro-9100hc-manual_d-36.png "Page 37
37
Adjustment and Setting Using Menus
3“Set up” menu
Use this menu to set the basic Tracking and Positioning settings of a
picture image. Items that can be adjusted via the “Set up” menu are
shown below.
•Displaying items differ depending on whether Video input or PC input
is selected.
When Video input is selected
Adjustment item (press/)Adjustment content (press/ )
“Position”Adjusts the position of the image and
menu display.
[Press the [ENTER] button to enter the
“Position” menu 4.
“Deinterlace”...")
37 Adjustment and Setting Using Menus 3“Set up” menu Use this menu to set the basic Tracking and Positioning settings of a picture image. Items that can be adjusted via the “Set up” menu are shown below. •Displaying items differ depending on whether Video input or PC input is selected. When Video input is selected Adjustment item (press/)Adjustment content (press/ ) “Position”Adjusts the position of the image and menu display. [Press the [ENTER] button to enter the “Position” menu 4. “Deinterlace”...
Page 38
38
8“Logo” menu
Adjustment item (press/)Adjustment content (press/ )
“Logo disp.” Sets whether to indicate the user set logo
(captured image: “Logo disp.”) when the
projector starts up.
{“ON”}
“Logo pos.”Sets the position of the user set logo (cap-
tured image: “Logo disp.”) when the pro-
jector starts-up. Re-setting can be per-
formed only when the logo has been
eliminated.
Set value :
“Logo pos.” :
“Back color” Selects the background color of the user
set picture (captured image: “Logo disp.”)....
Page 39
![Page 39
39
Adjustments and Settings Using Menus
e“Options” menu (“Page 2”)
Adjustment item (press/)Adjustment content (press/ )
“Sleep time[min]” Sets the length of sleep time which, when
lapsed, automatically puts the projector
into stand-by state if no signal is input-
ted.
Setting value: “15”, “30”, “60”, “OFF”
{“OFF”}
“Menu color” When “ON”, menu becomes transparent
and the background can be seen through
it.
Setting value: “OFF”, “ON” {“OFF”}
“PC2(BNC)” Sets whether to use the BNC connector
on the back...](http://img.usermanuals.tech/thumb/5762/88798/w300_dukane-imagepro-9100hc-manual_d-38.png "Page 39
39
Adjustments and Settings Using Menus
e“Options” menu (“Page 2”)
Adjustment item (press/)Adjustment content (press/ )
“Sleep time[min]” Sets the length of sleep time which, when
lapsed, automatically puts the projector
into stand-by state if no signal is input-
ted.
Setting value: “15”, “30”, “60”, “OFF”
{“OFF”}
“Menu color” When “ON”, menu becomes transparent
and the background can be seen through
it.
Setting value: “OFF”, “ON” {“OFF”}
“PC2(BNC)” Sets whether to use the BNC connector
on the back...")
39
Adjustments and Settings Using Menus
e“Options” menu (“Page 2”)
Adjustment item (press/)Adjustment content (press/ )
“Sleep time[min]” Sets the length of sleep time which, when
lapsed, automatically puts the projector
into stand-by state if no signal is input-
ted.
Setting value: “15”, “30”, “60”, “OFF”
{“OFF”}
“Menu color” When “ON”, menu becomes transparent
and the background can be seen through
it.
Setting value: “OFF”, “ON” {“OFF”}
“PC2(BNC)” Sets whether to use the BNC connector
on the back...
Page 40
![Page 40
40
When video input is selected
“Input” Displays the image input [VIDEO], [Y/C],
[PC2]) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
“0” : not being used.
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time”Displays the number of accumulated used
hours of the light-source lamp.
When PC input is selected
“Input”Displays the computer input...](http://img.usermanuals.tech/thumb/5762/88798/w300_dukane-imagepro-9100hc-manual_d-39.png "Page 40
40
When video input is selected
“Input” Displays the image input [VIDEO], [Y/C],
[PC2]) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
“0” : not being used.
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time”Displays the number of accumulated used
hours of the light-source lamp.
When PC input is selected
“Input”Displays the computer input...")
40 When video input is selected “Input” Displays the image input [VIDEO], [Y/C], [PC2]) when projecting. “Switcher” Displays the selected switcher matching the specification of this projector. “0” : not being used. “1-10” : switcher number. For details, please check with your au- thorized dealer. “Source” Displays the type of video signal of the image projected. “Lamp time”Displays the number of accumulated used hours of the light-source lamp. When PC input is selected “Input”Displays the computer input...