Dukane Imagepro 9100hc D-ila Multimedia Projector Users Manual

41
Setting “Aspect ratio” and “Resize”
1.Project the image onto the screen
2.Press the [MENU] button
•The main menu appears on the screen.
3. Press the cursor buttons (
 / ) to select “Set up” and
press [ENTER] or cursor ()
•The “Set up” menu appears on the right side of the screen.
4.Select “Aspect ratio” with the cursor buttons (
 / ) and
press [ENTER]
•The “Aspect ratio” menu appears on the screen.
By setting the “Aspect ratio” and “Resize” of the projected input image, optimum image can be...

42
Setting “Aspect ratio” and “Resize”
5.Select “Zoom” with the cursor buttons  ( / )
•Set “Aspect ratio” to “Zoom” for optimum projected image.
6.Press the [MENU] button to end when adjustment is com-
pleted
•The menu disappears from the screen.
The relation between the input image and the projected image according to the setting of “Aspect ratio”
menu
Input image
SDTV(4:3)
HDTV(16:9)
SDTV(4:3)
Images recorded in
letterbox (black bars
above and below the
screen) such as in DVD
software.
The setting...

43
Setting “Aspect ratio” and “Resize”
1.Project the image onto the screen
2.Press the [MENU] button
•The main menu appears on the screen.
3. Press the cursor buttons (
 / ) to select “Set up” and
press [ENTER] or cursor ()
•The “Set up” menu appears on the right side of the screen.
4.Select “Resize” with the cursor buttons  (
 / ) and press
[ENTER]
•The “Resize” menu appears on the screen.
Setting the “Resize”
Set the “Resize” when HDCP image is input from [PC3] terminal.
QUICK ALIGN. PC VIDEOVOLUME...

44
Setting “Aspect ratio” and “Resize”
5. Select “Zoom” with the cursor buttons ( / )
•Set “Resize” to “Zoom” for optimum projected image.
6.Press the [MENU] button to end when adjustment is com-
pleted
•The menu disappears from the screen.
The relation between the input image and the projected image according to the setting of “Resize” menu
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.MENU
EXIT
ENTER
VIDEO
TEMPSTAND BYOPERATE
6
5
6
5
PRESET HIDE
ENTER
MENU EXIT
Resize
1:1PanelZoomAspect
A
GBR
Image adj.
Set...

45 Notes
•Setting the logo display item in the “Logo”
menu to “ON” and switching on the power dis-
plays the D-ILA logo and then the user-set
logo. (Factory setting is “ON”)
•When the D-ILA or user-set logo is displayed
after the projector is turned on, pressing the
[EXIT] button will delete the logo.
•During video signal input, pressing the [EXIT]
button on the remote control unit when the
menu is not displayed causes the logo to ap-
pear.
Press any other button to delete the logo from
the screen.
•The...

46
Editing and projecting logo
7.Set the menu position as required
•Select “Menu pos.” with the cursor buttons (
 / )
•Move the menu display position with the cursor buttons ( / )
while viewing the projected image.
8.Select “Horiz. move” with the cursor buttons (
 / )
•Move the logo left or right with the cursor buttons ( / ) while
viewing it on the screen.
9.Select “Vert. move” with the cursor buttons (
 / )
•Move the logo up or down with the cursor buttons ( / ) while
viewing it on the...

47
When lamp time exceeds 1000 hours:
When the accumulated lamp time reaches 1000, a mes-
sage indicating “1000h” will appear on the projected screen.
• Press [EXIT] button to delete the message.
 When lamp time exceeds 1900 hours:
●When the accumulated lamp time reaches 1900 hours:
The [LAMP] indicator on the projector lights up.
● When the accumulated lamp time exceeds 1900 hours:
“Lamp replacement” appears on the screen.
* Press [EXIT] button to delete the message.
Replacing the Lamp
The light...

48
3. Remove the lamp unit.
Replacing the Lamp
4. Insert the new lamp unit until it is fully in.
5. Close the handle, and tighten the screw.
•Tighten the two screws with a ª screwdriver.
6. Attach the light-source lamp cover and tighten
the screw.
•Tighten the two screws with a ª screwdriver.
Note
• When closing the lamp cover, please insert the left
side (with the two claws) in first and then ensure that
the protruding part found on the reverse side of the
cover fits snugly into the hole of the main...

49
Replacing the Lamp
1.Insert the power cord into the wall outlet
•The [STAND BY] indicator lights up when the main power is input-
ted.
2.Press the [EXIT], [HIDE], [PRESET] buttons on the remote
control sequentially, then press VOL 
ª for 2 seconds or
more
•The [STAND BY] and [OPERATE] indicators alternately blink about
every approx. 3 seconds. After blinking stops, lamp time resets
and the projector returns to the stand-by state ([STAND BY] indi-
cator lights up).
Resetting the lamp time
After...

50
●Put on rubber gloves when using a neutral detergent.
●After you wash a filter in water, make sure that the filter is
completely dry before reinstalling, otherwise electric
shocks or malfunctions may occur.
●Do not clean removable filters with a vacuum cleaner.
Since these filters are soft, they can be sucked into the
vacuum cleaner or otherwise damaged.
Cleaning and Replacing the Filter
Clean the filter regularly or it may not work satisfactorily, causing damage. If the filter is extremely dirty and...