Dukane Imagepro 9100hc D-ila Multimedia Projector Users Manual

							31
Basic Operations
  Using the Quick Alignment function
The Quick Alignment function automatically adjusts (sets) the screen set-
tings of the image input from the [PC1] or [PC2] input terminal.
•This can only be performed with the remote control.
Press the [QUICK ALIGN.] (Quick Alignment) button.
•During automatic alignment, “QUICK ALIGN...” appears on the screen,
and disappears after alignment is complete.
Notes
•The Quick Alignment function only works when computer sig-
nals are input into either the [PC1] or [PC2] input terminal.
·It does not work when signals are input via a [VIDEO IN] terminal
(The [VIDEO] or [Y/C] input terminal).
·When input signal from [PC3] input terminal is received, “QUICK
ALIGN...” is displayed but it is not functional.
•The Quick Alignment function.
·This automatically adjusts “Horiz. disp. pos.”, “Vert. disp. pos.”,
“Phase”, “Tracking”, etc.
•Using the Quick Alignment function for automatic adjustments.
·Please use with bright still-pictures. This function may not work
correctly on a dark picture or a motion-video.
If adjustment with the Quick Alignment function is not satisfac-
tory, adjust “Horiz. disp. pos.” and “Vert. disp. pos.”, “Phase” and
“Tracking” individually.
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
HX-1E_p15-31_En.p6510/3/03, 6:09 PM 31 
						

							32
Adjustments and Settings Using Menus
The menus displayed on the screen are used to setup the projector and perform adjustments.
The Menu Structure
 When video input is selected
Notes
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from among 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
•The menu screen for HDCP compatible signal input is
the same as when PC input is selected.
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Decoder
SECAMPA L NTSC4.43NTSC
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTER
BlueBlack
OFFONImage adj.
Set up
Logo
Options
Language
Information
AENTER
(-) (+)12(-) (+)12
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
15sec ON
OFF ON
OFF ON5sec OFF
ENTER
ENTER
HDTV
MacRGB
Color profile
NTSC
PA L
EXIT
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
NTSCSource 
1234 hLamp time
CH.0SwitcherVIDEOInput 
Image adj.
Set up
Logo
Options
Language
Information
A
GREEN
BLUE REDGBR
Color temp.6500HIGH User
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
OFF ON
OFFON
OFF ON
9600RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200
PC
HDCP 12801400
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
PC3     601530OFF
Color profile     
Menu display     
Line display     
Flip H     
Flip V     
Page 2      Contrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Logo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menu
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
Deutsch
Español
Italiano
Français
Português
A
Image adj.
Set up
Logo
Options
Language
Information
ENTERENTER
ENTERENTERENTERENTER
Auto OFF
1080i 1035i sF
12Position     
Deinterlace     
HDTV     
Aspect ratio     
Decoder     
Phase     
12
12
1
English
A
GBR
Aspect ratio
4:3 16:9Zoom
Image adj.
Set up
Logo
Options
Language
Information
Position     
Menu pos.
Horiz.disp.pos.     
Vert.disp.pos.
Horiz.DIST pos.
(NTSC) AUTO
The menus of the projector have the following structure.
Submenu
Main menu
eMain: “Options” menu (“Page 2”) qMain: “Options” menu (“Page 1”)
tMain: “Information” menu2“Color temp.” menu 1Main: “Image adj.” menu
p“Capture start”
9“Capture menu” 6“Decoder” menu 4“Position” menu
w“Color profile” menu
rMain: “Language” menu 8Main: “Logo” menu 3Main: “Set up” menu
5“Aspect ratio” menu
HX-1E_p32-40_En.p6510/3/03, 6:09 PM 32 
						

							33
Adjustments and Settings Using Menus
 When PC input is selected
Notes
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from among 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
•The menu screen for HDCP compatible signal input is
the same as when PC input is selected.
A
GBR
ENTER
LowStd HighSTBP 12 123
A1234 hCH.0
1280 X 1024
63.98kHz
60.02 HzPC1
GBR
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
Information
Image adj.
Set up
Logo
Options
Language
InformationImage adj.
Set up
Logo
Options
Language
Information
A
GREEN
BLUE REDGBR
Color temp.6500HIGHUserContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Position     
Tracking     
Phase     
Resize     
Clamp     
Sync level
ENTER
Capt.in prog.(approx. 2min)        
Signal can not be captured        
Reduce capt.size        
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
15secON
OFF ON
OFF ON5sec OFF
ENTER
ENTERColor profile     
Menu display     
Line display     
Flip H     
Flip V     
Page 2     
HDTV
MacRGB
Color profile
NTSC
PA L
EXIT
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Image adj.
Set up
Logo
Options
Language
InformationInput     
Switcher     
Resolution
Frequency H
Frequency V
Lamp time     
Deutsch
Español
Italiano
Français
Português
A
Image adj.
Set up
Logo
Options
Language
Information
OFF ON
OFFON
OFF ON
9600RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200
PC
HDCP 12801400English
Resize
1:1PanelZoomAspect
A
GBR
Image adj.
Set up
Logo
Options
Language
Information
Sleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
PC3     601530OFF
Image adj.
Set up
Logo
Options
Language
Information
A
GBRENTERENTER
BlueBlack
OFFONLogo disp.     
Logo pos.     
Back color     
Logo delete     
Capture menuImage adj.
Set up
Logo
Options
Language
Information
AENTER
(-) (+)12(-) (+)12
GBR
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
Capture menu     
Menu pos.     
Horiz.move     
Vert.move     
Horiz.size     
Vert.size     
Capture start     
12
12
1
Position     
Menu pos.
Horiz.disp.pos.     
Vert.disp.pos.
Horiz.DIST pos.
eMain: “Options” menu (“Page 2”) qMain: “Options” menu (“Page 1”)
tMain: “Information” menu2“Color temp.” menu 1Main: “Image adj.” menu
p“Capture start”
9“Capture menu” 4“Position” menu
w“Color profile” menu
rMain: “Language” menu 8Main: “Logo” menu 3Main: “Set up” menuSubmenu Main menu
7“Resize” menu
HX-1E_p32-40_En.p6510/3/03, 6:09 PM 33 
						

							34
Adjustments and Settings Using Menus
 When no image signal is inputted
Notes
•The display language of the menus is set to “English” when
the projector is bought. The display language can be se-
lected from among 8 languages. (☞ page 39)
However, certain phrases and nouns, etc., are displayed
only in English.
•The menu screen for HDCP compatible signal input is
the same as when PC input is selected.
A
GBR
ENTER
ENTER
LowStd HighSTBP 12 123
Image adj.
Set up
Logo
Options
Language
InformationPosition     
Tracking     
Phase     
Resize     
Clamp     
Sync level
Image adj.
Set up
Logo
Options
Language
Information
A
15secON
OFF ON
OFF ON5sec OFF
ENTER
ENTERColor profile     
Menu display     
Line display     
Flip H     
Flip V     
Page 2     
A1234 hCH.0PC1
Image adj.
Set up
Logo
Options
Language
InformationInput     
Switcher     
     
Lamp time     
OFF ON
OFFON
OFF ON
9600RGB YPbPr
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
19200
12801400
Deutsch
Español
Italiano
Français
Português
A
Image adj.
Set up
Logo
Options
Language
InformationEnglish
PCHDCP
601530OFFSleep time[min]     
Menu color     
PC2(BNC)     
DIST     
SCART     
RS-232C[bps]     
SXGA     
PC3
Image adj.
Set up
Logo
Options
Language
Information
A
ENTERENTER
ENTERENTERENTERENTER
Auto OFF
1080i 1035i sF
12Position     
Deinterlace     
HDTV     
Aspect ratio     
Decoder     
Phase     
Image adj.
Set up
Logo
Options
Language
Information
A
GBR12
12
1
Position     
Menu pos.
Horiz.disp.pos.     
Vert.disp.pos.
Horiz.DIST pos.
GBR
GBR
GBR
GBR
eMain: “Options” menu (“Page 2”) qMain: “Options” menu (“Page 1”)
tMain: “Information” menu rMain: “Language” menu 3Main: “Set up” menu
(When PC input is selected)Submenu Main menu
4“Position” menu 3Main: “Set up” menu
(When video input is selected)
HX-1E_p32-40_En.p6510/3/03, 6:09 PM 34 
						

							35
Adjustments and Settings Using Menus
The Menu Operation Buttons
The menus are accessed and operated using the following buttons on
the projector/remote control:
Button
Main unit Remote control unitFunction
Displays the main menu on the
screen.
•When the main menu is displayed,
press to exit the menu mode.
Confirm the selected item on main
menu.
Press to shift to the “Set up” screen
of the selected item against which
[ENTER] is displayed.
Press to return to the previous menu.
•  While the main menu is displayed,
press to exit the menu mode.

/:Select menu items and ad-
justment items.
/:Perform setting of the se-
lected adjustment item.
(Some items are not possi-
ble for setting)
The adjusted value will be
reflected to the image im-
mediately.
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
PRESET
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.
EXIT
ENTER
HIDE
VIDEO
TEMPSTAND BYOPERATE
MENUMENU
ENTER
EXIT
ENTER
ENTER
ENTER
EXITMenu
operation
button
Menu operation
buttonMain unit
Remote control unit
HX-1E_p32-40_En.p6510/3/03, 6:09 PM 35 
						

							36
The Procedure for Menu Operation
1.Press the [MENU] button
The main menu is displayed on the screen.
4.Press the cursor buttons (
/) to select an adjustment
item
•Adjustment item names displayed in pale cannot be selected.
5.Press the cursor buttons ( / ) to change the setting
value
6.To exit after the adjustment, press the [EXIT] button
•Each time you press the button, the menu returns to the previous
one.
7.Repeat procedures 2 to 6 to set other items
After all adjustments are done,
Press the [MENU] button.
The menu will disappear from the screen.The icon of the selected menu
item will be highlighted.
2.Press the cursor buttons (
/) to select a main menu
item
•The content of the selected item is displayed on the right side of
the screen.
•When “Information” is chosen, the image input or PC input infor-
mation (whichever is currently selected) is displayed on the right
of the menu.
•When “Language” is selected, you can set the language. ➔ Pro-
ceed to Procedure 6.
3.Press [ENTER] or cursor (  ) to confirm the menu item
•The menu indicated differs according to whether Video input or
PC input is selected, or when there is no image signal inputted.
For details, please see ‘The Menu Configuration’ on the next page. E.g. Main menu when video input
is selected: “Image adj.”
Alternatively, press [ENTER].
•When the item in the image adjustment menu against which
[ENTER] is indicated is selected, either it will shift to the set
up screen or the item command will be executed.
E.g. “Set up” menu when video
input is selectedE.g. “Set up” menu when PC
input is selected
Adjustments and Settings Using Menus
QUICK ALIGN. PC VIDEOVOLUME
PRESET HIDE
ENTER
MENU EXITFREEZE
OPERATE
V-KEYSTONEH-KEYSTONESCREENDIGITAL
ZOOM
FOCUS
W
S
MENU
V-KEYSTONEPC LAMP
H-KEYSTONE VOL.MENU
EXIT
ENTER
VIDEO
TEMPSTAND BYOPERATE
2, 4 3, 5 6 1
5
1
6
2, 4 3, 5
5
A
12
12
1 12
12
ENTERENTER
Image adj.
Set up
Logo
Options
Language
InformationContrast     
Brightness     
Color     
Tint     
Sharpness     
Color temp.     
Reset     
Image adj.
Set up
Logo
Options
Language
Information
A
GBR
ENTERENTER
ENTERENTERENTERENTER
Auto OFF
1080i 1035i sF
12Position     
Deinterlace     
HDTV     
Aspect ratio     
Decoder     
Phase     
A
GBR
Image adj.
Set up
Logo
Options
Language
InformationENTER
LowStd HighSTBP 12 123
Position     
Tracking     
Phase     
Resize     
Clamp     
Sync level
ENTERENTER
The menu item currently
selected is displayed.
HX-1E_p32-40_En.p6510/3/03, 6:10 PM 36 
						

							37
Adjustment and Setting Using Menus
3“Set up” menu
Use this menu to set the basic Tracking and Positioning settings of a
picture image. Items that can be adjusted via the “Set up” menu are
shown below.
•Displaying items differ depending on whether Video input or PC input
is selected.
When Video input is selected
Adjustment item (press
/)Adjustment content (press/ )
“Position”Adjusts the position of the image and
menu display.
[Press the [ENTER] button to enter the
“Position” menu 4.
“Deinterlace” This is set when viewing movies.
Set value : “Auto”, “OFF” {“Auto”}
“Auto” : Normally, the projector
is set to “Auto”.
“OFF” :This is set when not
viewing movies.
“HDTV” In order to display “HDTV” signals in the
exact aspect ratio of 16:9, the correct nu-
merical value has to be set.
Set value : “1080i”, “1035i”, “sF”
{1080i}
“1080i” : Normally, set to “1080i”.
“1035i” :Set when high vision
signals are used.
“sF” : U s e d  fo r  s e g m e n t
frame signals.
“Aspect ratio” Select the vertical-to-horizontal ratio of
the image projected.
[Press the [ENTER] button to enter the
“Aspect ratio” menu 5.
“Decoder” Sets the “Decoder”.
[Press the [ENTER] button to enter the
“Decoder” menu 6.
“Phase” Adjusts flickering or dim images.
(setting is normally not required.)
Range of values : 0 ~ 31
{Varies with signals}
When PC input is selected
Adjustment item (press
/)Adjustment content (press/ )
“Position”Adjusts the position of the image and
menu display.
[Press the [ENTER] button to enter the
“Position” menu 4.
“Tracking” Adjusts lateral size and display area of
image. (Setting is normally not required.)
{Varies with signals}
“Phase” Adjusts flickering or dim image.
(adjustment is normally not required.)
Range of values : 0 ~ 40
{Varies with signals}
“Resize” To set the way to display in the panel in-
put signals that have fewer pixels (lower
resolution) than D-ILA elements.
[Press the [ENTER] button to enter the
“Resize” menu 7.
“Clamp” This can be used if the screen of the PC/
workstation is unstable in that it dims and
brightens.
Set the position of the clamp pulse to
Back porch (“BP”) or Sync tip (“ST”).
Normally, “BP” is used.
Values : “ST”, “BP” {“BP”}
Adjustment item (press
/)Adjustment content (press/ )
“Contrast” Adjusts the contrast of the picture image.
Range of values: -30 ~ 30 {0}
“Brightness” Adjusts the brightness of the picture im-
age. Range of values: -30 ~ 30 {0}
“Color” Adjusts the color density of the picture
image. Range of values: -30 ~ 30 {0}
“Tint”Adjusts the tint of the picture image.
Range of values: -30 ~ 30 {0}
“Sharpness”* Adjusts the outline of the picture image.
Range of values: -3 ~ 3 {0}
“Color temp.”Adjust the Color temperature of the
screen.
[Press the [ENTER] button to enter  the
Color temperature setting menu 2.
“Reset”Resets all items in the “Image adj.”
submenu to the pre-set values (i.e. val-
ues set upon purchase).
[ Press the [ENTER] button to reset.
*In the “Set up” menu 3, if the “Resize” function in the PC submenu is
set to “1:1”, the image quality will not change even if the value is
changed. (No adjustment)
2“Color temp.” menu
To adjust the “Color temp.” of the projected image, press the (
/)
cursor buttons and choose the setting. Next press the (/) cursor
buttons to set the “Color temp.”. If “6500” is set, the image will turn out
reddish.
Set value : “6500”, “HIGH”, “User” {“6500”}
“RED” : -255 ~ 0 {0}
“GREEN” : -255 ~ 0 {0}
“BLUE” : -255 ~ 0 {0}
The Menu Configuration
Item values shown in {  } are initial values set at manufacture.
•Press [ENTER], [EXIT] or the right cursor button () to oper-
ate a menu while it is displayed.
•The menu items corresponding to an item currently selected
is displayed on the right-hand side of the main menu.
•Menu items shown differ according to whether Video input or
PC input is selected or when there is no image signal input-
ted.
•When “Information” is selected, information relating to the
present selected image input appears on the right side of the
menu.
There is no submenu for this “Information” menu. (For details,
please see ‘The Menu Structure’ on page 32.)
When Video input is selectedWhen PC input is selected
1“Image adj.” menu
Image adjustment.
You can adjust the following items on the “Image adj.” menu.
•There is no display when no image signal is inputted.
HX-1E_p32-40_En.p6510/3/03, 6:10 PM 37 
						

							38
8“Logo” menu
Adjustment item (press
/)Adjustment content (press/ )
“Logo  disp.” Sets whether to indicate the user set logo
(captured image: “Logo disp.”) when the
projector starts up.
{“ON”}
“Logo pos.”Sets the position of the user set logo (cap-
tured image: “Logo disp.”) when the pro-
jector starts-up. Re-setting can be per-
formed only when the logo has been
eliminated.
Set value :
“Logo pos.” :
“Back color” Selects the background color of the user
set picture (captured image: “Logo disp.”).
{“Black”}
Re- setting can be performed only when
the logo has been eliminated.
“Logo delete”Deletes the user set logo (captured
image: “Logo disp.”). Deletion takes a few
seconds.
[Press the [ENTER] button to delete.
“Capture menu” You can project a picture from the video
player or PC and capture it to use as your
logo.
The captured picture can be displayed as
a logo display when the projector starts
up.
[Press the [ENTER] button to enter  the
“Capture menu” 9.
9“Capture menu”
Adjustment item (press
/)Adjustment content (press/ )
“Menu pos.” Adjusts the display position of the cap-
ture menu.
Set value :
“Menu pos.” :
“Horiz. move” The position of the picture that you want
to capture can be moved left or right with
the cursor buttons (
 / ).
“Vert. move” The position of the picture that you want
to capture can be moved up or down with
the cursor buttons (
 / ).
“Horiz. size” The width of the picture that you want to
capture can be set by the cursor buttons
(
 / ).
“Vert. size” The height of the picture that you want to
capture can be set by the cursor buttons
(
 / ).
“Capture start” After setting all the items of the capture
menu, image capture starts.
❈Note that images already inputted will
be deleted.
[Press the [ENTER] button to start.
Adjustments and Settings Using Menus
When there is no image signal inputted
Adjustment item (press
/)Adjustment content (press/ )
“Position”Adjusts the position of the image and
menu display.
[Press the [ENTER] button to enter the
“Position” menu 4.
“Sync level” Although the inputted image signal is
adjusted so that synchronization occurs
automatically, this changes by changing
this setup.
Setting can be made by selecting “Low”
(weaker), “Std” (factory set) or “High”
(stronger).
Values : “Low”, “Std”, “High” {“Std”}
4“Position” menu
You can adjust the menu display position. Press the (
/) cursors to
set the horizontal/vertical position of the menu display.
Set Value :
“Menu pos.” :
“Horiz. disp. pos.” : Varies with signals.
“Vert. disp. pos.” : Varies with signals.
“Horiz. DIST pos.” : -8 ~ +7 {0}
5“Aspect ratio” menu
Press the cursor ( / ) to set the aspect ratio of image.
(☞ page 41, 42)
Setting value : “4:3”, “16:9”, “Zoom” * {varies with signals}
*When creating a 16:9 image with black bars above and below the
screen from the signal with original aspect ratio of 4:3, the image will
be enlarged to full screen on the panel if “Aspect ratio” is set to “Zoom”.
6“Decoder” menu
Press the (
/) cursor buttons to choose the “Decoder” of the image
signals. Normally, “AUTO” is selected. When “AUTO” does not function
or when there is error, select the appropriate color system according to
the software player.
Values : “AUTO”, “NTSC”, “NTSC4.43”, “PAL”, “SECAM”
{“AUTO”}
7“Resize” menu
Press the cursor ( / ) to resize.
(☞ page 43, 44)
Setting value : “1:1”, “Panel”, “Aspect”, “Zoom”
{varies with signals}
“1:1” : The image is displayed at the inputted resolution.
“Panel” : The picture image projected is virtually enlarged
to the full screen size if the inputted resolution is
smaller than (1400 pixels x 788 pixels).
“Aspect” :While maintaining the original aspect ratio, the
video image projected is virtually enlarged until ei-
ther the horizontal or vertical side reaches the full
size (1400 pixels x 788 pixels).
“Zoom” : The picture image projected is virtually enlarged
to the full screen size if the 16:9 image is created
with black bars above and below the screen from
the signal with original aspect ratio of 4:3. (When PC input is
selected)
{  }
¥¥¥ ¥ ¥ ¥ ¥ ¥
¥¥¥ ¥ ¥ ¥ ¥ ¥
{  }
¥¥¥ ¥ ¥ ¥ ¥ ¥
{  }
HX-1E_p32-40_En.p6510/3/03, 6:10 PM 38 
						

							39
Adjustments and Settings Using Menus
e“Options” menu (“Page 2”)
Adjustment item (press
/)Adjustment content (press/ )
“Sleep time[min]” Sets the length of sleep time which, when
lapsed, automatically puts the projector
into stand-by state if no signal is input-
ted.
Setting value: “15”, “30”, “60”, “OFF”
{“OFF”}
“Menu color” When “ON”, menu becomes transparent
and the background can be seen through
it.
Setting value: “OFF”, “ON” {“OFF”}
“PC2(BNC)” Sets whether to use the BNC connector
on the back of the projector as an “RGB”
signal input terminal or as a “YP
BPR”
(color-difference) signal input terminal.
Please reset it based on the connected
apparatus.
•The input will be “RGB” irrespective
of the PC signal setting.
Setting value: “RGB”, “YP
bPr”{“YPbPr”}
“DIST”Image of high resolution can be achieved.
Set as required.
This is turned “ON” when the [OPERATE]
button is pressed.
Setting value: “OFF”, “ON” {“ON”}
“SCART” Connects to a Europe-adapted SCART
plug and turns it “ON” during component
input.
Connect the Image Signal cable to the
[RGB] terminal of the [PC2] input termi-
nal and the Sync Signal cable to the
[VIDEO IN] terminal.
Setting value: “OFF”, “ON” {“OFF”}
“RS-232C [bps]”Sets the communication speed (signal
transmission speed) when communicat-
ing with a computer by using the [RS-
232C] terminal. Please set the baud rate
for transmission.
Setting value: “9600”, “19200” {19200}
“SXGA” Select “1400” to project SXGA+ signal.
Setting value: “1280”, “1400” {1280}
“PC 3” Set whether to use PC input or HDCP
compatible video signal when using [PC3]
terminal as input. Set according to the
connecting equipment.
Setting value : “PC”, “HDCP” {“HDCP”}
r“Language” menu
Select the language in this language menu with the CURSOR buttons
(
/).
Setting value : [
] (Japanese), [English], [Deutsch] (German),
[Español] (Spanish), [Italiano] (Italian), [Français]
(French), [Português] (Portuguese) and [
]
(Korean).
{[English]}
•Some words in the menu and proper nouns such as “VIDEO”, “NTSC”,
“QUICK ALIGN...” are shown only in English.
p “Capture start”
The status of capture is displayed in bold.
“Capt. in prog. (approx. 2min)”The image is being read into the projec-
tor. During this time interval, the projec-
tor will not respond to any command sig-
nal inputted by the user.
“Signal can not be captured”Clear the message with the [EXIT] but-
ton and input appropriate signals.
“Reduce capt. size”Clear the message with the [EXIT] but-
ton and decrease the signal size.
•Depending on the image content,
there will be cases where certain sig-
nals cannot be captured while others
of the same size can be.
q “Options” menu (“Page 1”)
The items of the “Options” menu shown below can be adjusted.
•The “Options” menu consists of two pages (“Page 1” and “Page 2”).
“Page 1”
Adjustment item (press
/)Adjustment content (press/ )
“Color profile” Sets the color table.
[Press the [ENTER] button to enter the
“Color profile” menu w.
“Menu  display” Sets whether the menu display automati-
cally clears after 15 seconds.
Values : “15sec”, “ON” {“15sec”}
“Line  display” Sets whether the line display is shown for
about 5 seconds.
Values : “5sec”, “OFF” {“5sec”}
“Flip H” Reverses image left to right.
Values : “ON”, “OFF” {“OFF”}
“Flip V” Inverses image upside down.
Values : “ON”, “OFF” {“OFF”}
“Page 2” Displays “Page 2” of the “Options” menu.
[Press the [ENTER] button to enter the
“Options” menu (“Page 2”) e.
w “Color profile” menu
To choose the color table of the image signals, press the (
/) CUR-
SOR buttons. When using “Color profile”, set the “Color temp.” to “6500”.
•No display in the absence of image signal input.
Values : “------”, “HDTV”, “MacRGB”, “NTSC”, “PAL”
{“------”}
HX-1E_p32-40_En.p6510/3/03, 6:10 PM 39 
						

							40
When video input is selected
“Input” Displays the image input [VIDEO], [Y/C],
[PC2]) when projecting.
“Switcher” Displays the selected switcher matching
the specification of this projector.
“0” : not being used.
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Source” Displays the type of video signal of the
image projected.
“Lamp time”Displays the number of accumulated used
hours of the light-source lamp.
When PC input is selected
“Input”Displays the computer input ([PC1],
[PC2], [PC3]) when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
“0” : not being used.
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Resolution”Displays the resolution of the inputted sig-
nal. (Horizontal x vertical)
•Some inputted signals cannot be dis-
played correctly.
“Frequency H” Displays the horizontal frequency of the
inputted signal.
“Frequency V” Displays the vertical frequency of the in-
putted signal.
“Lamp time”Displays the number of accumulated used
hours of the current light-source lamp.
When no image signal is inputted
“Input” Displays the current selected image in-
put ([VIDEO], [Y/C], [PC1], [PC2], [PC3])
when projecting.
“Switcher” Displays the selected switcher number
matching the specification of this projec-
tor.
“0” : not being used
“1-10” : switcher number.
For details, please check with your au-
thorized dealer.
“Lamp time”Displays the number of accumulated used
hours of the light-source lamp.
Adjustments and Settings Using Menus
t“Information” menu
Displays the information such as image input currently selected, other
information and lamp usage time.
HX-1E_p32-40_En.p6510/3/03, 6:10 PM 40