Dukane Imagepro 8944 Lcd Projector Users Manual



1. Main functions
1.2  PC-LESS Presentation  
(Display the images stored in SD card/USB memory.) (Continued)
Fig. 1.2.b Remote Control
• There are following limitations for file name and directory name in  
PC-LESS Presentation.
(1)  The projector's language setting is Japanese. 
Only alpha-numeric characters and Japanese are supported.
(2)  The projector's language setting is not Japanese. 
Only alpha-numeric characters and Latin-1 characters are supported.
• Data cannot be read...

8

Followings are required for 1 projector and 1 PC connection. Multiple PC 
connection is described in section 4.1.
2. Equipment connection and network setting
2. Equipment connection and network setting
2.1 Required equipment preparation
Projector: 1 unit
PC: 1 set  (“MIU Live Viewer” installation is required for “MIU Live Viewer” usage.) 
IEEE802.g wireless LAN equipment is required. 
Depending on the type of wireless LAN card and PC you are using, the 
projector  may not be able to communicate...



2. Equipment connection and network setting
 2.2  Network connection using “One-Click-Communication” function 
(Continued)
ePress the Reset key on remote control. Then Reset Menu will be displayed.
rPress the ▲ button to reset the Network settings.
/+7
456%#0%.
• SSID, WEP KEY will be set to factory default settings.
• If you like to set these items, please set again from WEB (19).
NOTE
2)  Connect PC and projector using LAN cable to make it ready for communication.
* In case of connecting with...

10

2. Equipment connection and network setting
4)  Click “One-Click” button in fig. 2.2.a. Projector is found. Then capture start 
button  is pushed and real time display is started automatically.
 2.2   Network connection using “One-Click-Communication” function 
(Continued)
[Wireless LAN connection]
1)  When projector network settings such as IP address and subnet mask are 
changed, need to return to the projector factory default settings. (9)
2)  In case 802.11b/g wireless LAN device is built-in...



2. Equipment connection and network setting
This is the explanation of network connection settings for Windows XP and 
Internet Explorer.
1) Log on to Windows XP as administrator authority. (*)
2) Open “Control Panel” from “Start” menu.
3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.3.2.a)
* Administrator authority is the account, which can access to all functions.
2.3.2. Network settings
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
4)...



2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
5)  When more than 2 usable network devices exist, make only one device “valid” 
that you want to use and the rest of devices “invalid”. (In this case, “Local  Area 
Connection” is selected.)
6)  Open “Local Area Connection Properties” window you use for network device.
    (Fig. 2.3.2.c)
Fig. 2.3.2.c “Local Area Connection Properties” window
7)  Set used protocol as...



2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
[About IP address]
Network address portion of PC IP address should be common with projector’s 
one but the PC total IP address should not be overlapped with other networked 
equipments.
For example, projector initial settings are as follows.
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Therefore, specify PC IP address as follows.
IP address: 192.168.1.xxx (xxx shows...

14

2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
2. Equipment connection and network setting
1)  Click “Internet Options” in “Network and Internet Connections” window  
(Fig. 2.3.3.a) to open “Internet Properties” window. (Fig. 2.3.3.b)
2.3.3 “Internet Option” setting
Fig. 2.3.3.a “Network and Internet Connections” window
Click
Fig. 2.3.3.b “Internet Properties” window
2)  Click “Connections” tab and then click “LAN settings” button to open “Local 
Area Network (LAN)...



2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
Fig. 2.3.3.c “Local Area Network (LAN) Settings” window
3)  Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.3.3.c)
Check PC and projector are connected properly here. If it is not connected, check 
cable connections and settings are properly or not.
1)  Start browser in PC and specify following URL, then click “Go” button.
URL: http://(Projector IP...



2. Equipment connection and network setting
By installing SD-Link11g card, PC and wireless LAN are able to communicate in 
both Ad-Hoc and Infrastructure modes.
How to set up wireless LAN connection manually.
2.4  Manual network connection setting – For wireless LAN
2.4.1 Preparation for wireless LAN connection
Fig. 2.4.1.a Without access point communication (Ad-Hoc)
Fig. 2.4.1.b With access point communication (Infrastructure)
*  Ad-Hoc is one of the wireless LAN communication methods...