Dukane Imagepro 8944 Lcd Projector Users Manual

LCD Projector
Model 8944
USER’S MANUAL
401-8944-00 



Projector
8944
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING  ►Before using this product, please read this manual to 
ensure the proper use of this product. After reading, store in a safe place
for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are 
described below. 
WARNING  This  symbol  indicates  information  that,  if  ignored,  could  possibly 
result in personal injury or even death due to...


About this manual  .  .  .  .  .  .  .  .  .  .1
Content   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .2
Projector features  .  .  .  .  .  .  .  .  .  .3
Preparations   .  .  .  .  .  .  .  .  .  .  .  .  .  .3 Contents of package . . . . . . . . . . . . .3 Fastening the lens cover . . . . . . . . . .3
Part names   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .4 Projector . . . . . . . . . . . . . . . . . . . . . .4 Control panel . . . . . . . . . . . . . . . . . . .5 Rear panel . . . . . ....

3

Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cover to the projector using 
the included strap.
. Fix the strap to the strap hole of the lens 
cover.
. 
Put one side of the strap into the groove on 
the rivet.
3. 
Push the rivet into the rivet hole.
Projector features / Preparations
Projector features
This projector is used to project various picture signals onto a screen.\
 This 
projector requires only a minimal amount of space for installation and c\
an...

4

Part names
Part names
Projector
( ) Speakers (x 4) (38).( ) Focus ring (20)(3) Zoom ring (20)(4)   Lamp cover (59) The lamp unit is inside.(5) Lens shift cover (20)(6) Horizontal lens shift dial (20)(7) Vertical lens shift dial (20)(8) Front cover(9) Lens (64)( 0) Lens cover (3)( ) Remote sensors (x 3) (15)( ) Elevator feet (x   ) (9)( 3) Elevator knobs (x   ) (9)( 4)   Filter cover (61) The air filter and intake vent are...

5

Part names
Control panel
( ) STANDBY/ON button (17)( )   MENU button (24) It consists of four cursor buttons.(3) INPUT button (18)(4) POWER indicator (17)(5) TEMP indicator (66)(6) LAMP indicator (66)
Rear panel
( ) Shutdown switch (68)( ) Security slot (9)(3) Security bar (9)(4) AC inlet (13)(5) Power switch (17)
(6) RGB   port (10)(7) RGB  port (10)(8) CONTROL port (10)(9) M -D port (10)( 0) VIDEO port (10)( ) S-VIDEO port...

6

Part names
Remote control
( )   Laser pointer (14) It is a beam outlet.( ) LASER INDICATOR (14)(3) LASER button (14)(4) STANDBY/ON button (17)(5) VOLUME button (18)(6) MUTE button (18)(7) VIDEO button (19)(8) RGB button (18)(9) SEARCH button (19)( 0) AUTO button (20)( ) ASPECT button (19) ( ) POSITION button (21)( 3) KEYSTONE button (21)( 4) MAGNIFY - ON button (22)( 5) MAGNIFY - OFF button (22)( 6) FREEZE button (22)( 7)...

7

Setting up
Setting up
Install the projector according to the environment and manner the projec\
tor will be 
used in.
WARNING  ►Place the projector in a stable horizontal position. If the 
projector falls or is knocked over it could cause injury and/or damage t\
o the 
projector. Using a damaged projector could then result in fire and/or electric 
shock.
•  Do not place the projector on an unstable, slanted or vibrational surfac\
e such 
as a wobbly or inclined stand.
• 
 
Do not place the projector...

8

Arrangement
Refer to the illustrations and tables below to determine screen size and\
 projection distance.
The values shown in the table are calculated for a full size screen:  0  4×768 (a) Screen size (diagonal)(b) Projection distance (± 0%)(c) Screen height (± 0%), when the vertical lens shift (20) is set full upward.
Setting up
(a) Screen size[inch (m)]
4 : 3 screen6 : 9 screen(b) Projection distance  [m (inch)](c) Screen height[cm (inch)](b) Projection distance  [m...