Dukane Imagepro 8944 Lcd Projector Users Manual

							


1. Main functions
1.2  PC-LESS Presentation  
(Display the images stored in SD card/USB memory.) (Continued)
Fig. 1.2.b Remote Control
• There are following limitations for file name and directory name in  
PC-LESS Presentation.
(1)  The projector's language setting is Japanese. 
Only alpha-numeric characters and Japanese are supported.
(2)  The projector's language setting is not Japanese. 
Only alpha-numeric characters and Latin-1 characters are supported.
• Data cannot be read correctly depending on the type of USB hard disk, USB 
memory and USB card reader.
• When your USB hard disk can use a DC power supply adapter, please use it.
NOTE 
						

							
8

Followings are required for 1 projector and 1 PC connection. Multiple PC 
connection is described in section 4.1.
2. Equipment connection and network setting
2. Equipment connection and network setting
2.1 Required equipment preparation
Projector: 1 unit
PC: 1 set  (“MIU Live Viewer” installation is required for “MIU Live Viewer” usage.) 
IEEE802.g wireless LAN equipment is required. 
Depending on the type of wireless LAN card and PC you are using, the 
projector  may not be able to communicate properly with your PC, even 
if the PC you are using is equipped with built-in wireless LAN function. 
To eliminate communication problems, please procure a Wi-Fi certified 
wireless LAN card.
LAN cable (in case of wired connection): 1 piece * 1
SD Wireless Network Card (in case of wireless connection): 1 unit * 2
Memory card (in case of “PC-LESS Presentation” usage): 1 piece
* 1:  When a projector and a PC are connected, use CAT-5 LAN cable.
* 2:  Access point is required when wireless LAN connection is used as 
Infrastructure mode.
This section explains how to connect network using “One-Click-Communication” 
function. This function makes PC and projector network connection very easy 
without complicated settings like IP address and SSID.
*  This function cannot be used when multiple PCs or multiple projectors are 
connected.
*  The system of Windows2000 Professional Service Pack 4 or Windows XP  and 
the administrator authority are required to use “One-Click-Communication” 
function. (Administrator authority)
*  This function might not work depending on your used wireless LAN driver .
If so, setup the connection manually. (10, 16 and refer to the User Manuals for 
your PC and wireless equipment.)
2.2  Network connection using “One-Click-Communication” 
function
[Wired LAN connection]
1)  When projector network settings such as IP address and subnet mask are 
changed, need to return to the projector factory default Network settings.
qPress the menu button on remote control or the ▲/◄/►/▼ button on keypad. 
Then OSD menu will be displayed. If Easy Menu is displayed, change the 
menu to Advanced menu. 
						

							


2. Equipment connection and network setting
 2.2  Network connection using “One-Click-Communication” function 
(Continued)
ePress the Reset key on remote control. Then Reset Menu will be displayed.
rPress the ▲ button to reset the Network settings.
/+7
456%#0%.
• SSID, WEP KEY will be set to factory default settings.
• If you like to set these items, please set again from WEB (19).
NOTE
2)  Connect PC and projector using LAN cable to make it ready for communication.
* In case of connecting with existing network, contact your network administrator .
3)  Start up “MIU Live Viewer”. Window appears in fig. 2.2.a. (Refer to section 3.1 
how to use “MIU Live Viewer”.)
Fig. 2.2.a “MIU Live Viewer” initial window
/07=4)$?
2+%674
5.%6

+/#)
5672+0276
126+10/+7#5;/07
5%40
.+8/1&2%.5524506#6+105672G5*16+0(14/#6+10548+%
wSelect the MIU menu by using ▲/▼ button. 
						

							
10

2. Equipment connection and network setting
4)  Click “One-Click” button in fig. 2.2.a. Projector is found. Then capture start 
button  is pushed and real time display is started automatically.
 2.2   Network connection using “One-Click-Communication” function 
(Continued)
[Wireless LAN connection]
1)  When projector network settings such as IP address and subnet mask are 
changed, need to return to the projector factory default settings. (9)
2)  In case 802.11b/g wireless LAN device is built-in the PC, make the LAN valid 
and other network connections invalid. If wireless LAN device is not built in the 
PC, connect 802.11b/g wireless LAN device and install device driver to the PC. 
(Refer to the user guide for wireless LAN device details.)
3)  Start up “MIU Live Viewer”, then the window appears (shown in fig. 2.2.a).
4)  Click “One-Click” button as shown in fig. 2.2.a. Then projector will be found 
and the capture start button  is activated then real time display is started 
automatically.
When you need to set the original IP address and SSID other than factory default 
settings, need to set up network connection manually.
This section explains how to set up network connection manually.
2.3   Manual network connection setting – Wired LAN -
At first, connecting projector and PC with wired LAN connection to check PC 
setting and connection. Next section explains PC settings.
Connecting projector with network using LAN cable, and then set it ready to 
communicate with PC.
* Connecting with existing network, contact network administrator .
At last, turn on the projector. This is the end of Equipments connection.
2.3.1. Equipments connection 
						

							


2. Equipment connection and network setting
This is the explanation of network connection settings for Windows XP and 
Internet Explorer.
1) Log on to Windows XP as administrator authority. (*)
2) Open “Control Panel” from “Start” menu.
3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.3.2.a)
* Administrator authority is the account, which can access to all functions.
2.3.2. Network settings
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
4) Open “Network Connections”. (Fig. 2.3.2.b)
Fig. 2.3.2.a “Network and Internet Connections” window
Fig. 2.3.2.b “Network Connections” window 
						

							


2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
5)  When more than 2 usable network devices exist, make only one device “valid” 
that you want to use and the rest of devices “invalid”. (In this case, “Local  Area 
Connection” is selected.)
6)  Open “Local Area Connection Properties” window you use for network device.
    (Fig. 2.3.2.c)
Fig. 2.3.2.c “Local Area Connection Properties” window
7)  Set used protocol as “TCP/IP” and open “Internet Protocol (TCP/IP) Properties” 
window.
Fig. 2.3.2.d “Internet Protocol (TCP/IP) Properties” window
8) Set IP address, subnet mask and default gateway for PC. 
						

							


2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
[About IP address]
Network address portion of PC IP address should be common with projector’s 
one but the PC total IP address should not be overlapped with other networked 
equipments.
For example, projector initial settings are as follows.
IP address: 192.168.1.10
Subnet mask: 255.255.255.0
Therefore, specify PC IP address as follows.
IP address: 192.168.1.xxx (xxx shows decimal number.)
Subnet mask: 255.255.255.0
Select from 1 to 254 for “xxx” not duplicating with any other equipments. In this 
case, projector has “192.168.1.10” IP address, specify from 1 to 254 except 10 for 
PC.
Projector IP address can be changed by using configuration utility. (Refer to 
section 2.5.)
When DHCP server exists in network, it is possible to set using IP address, which 
is automatically assigned to projector.
If projector and PC exist in the same network (i.e. network address is common), 
default gateway can be blank.
* DHCP is abbreviation for “Dynamic Host Configuration Protocol” and the function  DHCP is abbreviation for “Dynamic Host Configuration Protocol” and the functionDHCP is abbreviation for “Dynamic Host Configuration Protocol” and the function 
to provide necessary setting for network like IP address from server to client. 
Server that has DHCP function is called DHCP server.
* When projector and PC exist in different networks, default gateway setting is  When projector and PC exist in different networks, default gateway setting isWhen projector and PC exist in different networks, default gateway setting is 
necessary. Contact network administrator in detail. 
						

							
14

2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
2. Equipment connection and network setting
1)  Click “Internet Options” in “Network and Internet Connections” window  
(Fig. 2.3.3.a) to open “Internet Properties” window. (Fig. 2.3.3.b)
2.3.3 “Internet Option” setting
Fig. 2.3.3.a “Network and Internet Connections” window
Click
Fig. 2.3.3.b “Internet Properties” window
2)  Click “Connections” tab and then click “LAN settings” button to open “Local 
Area Network (LAN) settings”. (Fig. 2.3.3.c)
Click 
						

							


2. Equipment connection and network setting
2.3 Manual network connection setting – In case of wired LAN - (Cont\
inued)
Fig. 2.3.3.c “Local Area Network (LAN) Settings” window
3)  Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.3.3.c)
Check PC and projector are connected properly here. If it is not connected, check 
cable connections and settings are properly or not.
1)  Start browser in PC and specify following URL, then click “Go” button.
URL: http://(Projector IP address) /
For example, if projector IP address is 192.168.1.10, specify
URL: http://192.168.1.10/
2) After enter your ID and password, if Fig. 2.3.4 appears, it succeeds.
2.3.4 Check connection
Fig. 2.3.4 “Logon Menu” 
						

							


2. Equipment connection and network setting
By installing SD-Link11g card, PC and wireless LAN are able to communicate in 
both Ad-Hoc and Infrastructure modes.
How to set up wireless LAN connection manually.
2.4  Manual network connection setting – For wireless LAN
2.4.1 Preparation for wireless LAN connection
Fig. 2.4.1.a Without access point communication (Ad-Hoc)
Fig. 2.4.1.b With access point communication (Infrastructure)
*  Ad-Hoc is one of the wireless LAN communication methods without having 
access point to communicate.
*   Infrastructure is one of the wireless LAN communication methods with having 
access point to communicate. If certain quantities of equipments are used, this 
mode is efficiently. 
If communicating with existing network, contact your network administrator .
First, insert the SD wireless network card into SD Card slot (Inserting an SD card 
and USB memory of the User's Manual - Operating Guide).
Then, make PC ready for wireless communication.
In case 802.11b/g wireless LAN device is built-in the PC, make it valid and make 
other network connections invalid. If wireless LAN device is not built-in the PC, 
connect 802.11b/g wireless LAN device and install device driver. (Refer to the 
user guide for PC and wireless LAN device for detail.)