Dukane Imagepro 8944 Lcd Projector Users Manual

							


6*7/$0#+.=5&?
+OCIG
;5064
5.+&5*19
2%.5524506#6+10/07
+0648#.55612
/1&106+/2.#;
56#46+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG
+OCIG:ˆ:‰:Š
:Œ:‹
:Ž
:ˆ:ˆ:ˆ:‰:ˆ:‡

Following picture and movie files can be displayed.
• JPEG (.jpeg, .jpg) * Progressive is not corresponded.
• BMP (.bmp)
• PNG (.png)
• MPEG4 (.mp4) *   Supported bit resolution rate is less than 1Mbps in Simple 
Profile. 
Supported resolution is less than VGA. 
 Supported Audio format is only AAC.
4.2.1 Thumbnail display
Fig.4.2.1 shows thumbnail display. Click [THUMBNAIL] button in the Web Remote 
Control to display menu on the screen in order to make thumbnail display . 
You can also display thumbnail by remote control or keypad (53).
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Fig. 4.2.1. Thumbnail display
Thumbnail Menu
Thumbnail Images
Focused image
4. Utilize projector – Advanced - 
						

							
58

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations can be accessible while thumbnail is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• Thumbnail display shows 12 pictures in 1 page as maximum.
• It is not possible to change the input port by INPUT button when THUMBNAIL, 
SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Select the right edge images and press the ► button, then thumbnail menu 
will be selected.
• Some error Icons will be displayed in thumbnail.
NOTE
This file seems to be broken or not supported format.
This file exists only in Playlist (67), but does not exist anywhere.
▲/◄/►/▼Remote control/KeypadMove cursor.
PAGE UP  PAGE DOWN
Remote controlSwitch pages.
ENTER
INPUT
Remote control
KeypadDisplay selected image in full screen.
MENURemote controlDisplays PC-LESS PRESENTATION Menu.
4. Utilize projector – Advanced - 
						

							


4.2.2 Display in full screen
Full screen display (fig.4.2.2) shows a full display image on the PC. To make Full-
screen display, click [MENU] button in the Web Remote Control menu on the 
screen. When select [PC-LESS Presentation], then [Thumbnail] from the menu, 
click [ENTER] so that moves to be full-screen display.
Fig.4.2.2 Full-screen Display
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
While displaying in full screen, following operation can be accessible from the 
Web Remote Control.
* These operations are not accessible while projector OSD menu is displayed.
• It is not possible to change the input port by INPUT button of keypad 
when displaying the THUMBNAIL, SLIDE SHOW, or DIRECTORY.
• Displays the projector Menu before changing the input port.
• Image might not be displayed properly at the beginning or end of MP4 file 
playback. 
NOTE
◄/►or▲/▼(Selected on KEY  CONFIG. MENU 60)
• Rotate image 90 degrees clockwise or otherwise. Once image is rotated, it keeps the display image even though it is switched. (Thumbnail or slide show display) To return the original, rotating the image 360 degrees or erase play list in memory card. (Refer to section 4.3)• Moving the slide forward or backward.
ENTER
INPUT
Remote control
KeypadDisplaying thumbnail.
MENURemote controlDisplays PC-LESS PRESENTATION Menu.
Full-screen Display
4. Utilize projector – Advanced - 
						

							
60

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can display the image file with your desired size.
1) Select the DISPLAY SIZE in PC-LESS PRESENTATION Menu.
2)  Press the Enter button on the remote  
control or ► button on the Keypad.
3) Then DISPLAY SIZE menu appears.
4) Select your desired DISPLAY SIZE.
• REAL :   Displays the image at original size. 
Displays the image at the center of screen if original size is smaller 
than the screen size. 
Displays only center of the image if original size is larger than the 
screen size.
• NORMAL :   Displays the image for the maximum size on the screen, and 
keeps original aspect.
• FULL :  Displays the image at the full size screen. 
Original aspect will be changed to full size display.
The animation file is always played at VGA mode if resolution is larger than VGA.
The animation file is always played at the center of screen if resolution is smaller 
than VGA.
2%.5524506#6+10
6*7/$0#+.
5.+&5*19
&+4%64;&+52.#;5+
						

							


4.2.3. Slide show
Slide show (fig.4.2.3) displays a full screen image and move to the next interval. 
Click the “SLIDE SHOW” button in Web Remote Control, then Slide show will be 
played. Display time can be set by the Playlist (refer to section 4.3) and menu.
Fig. 4.2.3 Slide show
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations are accessible while slide show is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• It is impossible to change the input port by INPUT button if 
THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Images can be displayed when it is recorded in the Playlist.
• Image can not be displayed in the thumbnail if it is not recorded in the Playlist. (67)
• The START #, STOP #, INTERVAL, and MODE are set by thumbnail menu 
once, this setting has more priority than the Playlist.
• If you would like to release the priority, delete the slidemode.txt file from 
directory.
• When SLIDE SHOW mode is set to ONE TIME, the last slide of the 
presentation will be held on screen till either of ENTER key the remote or 
INPUT key on the projector is pushed.
NOTE
Full-screen Display
ENTER
INPUT
Remote control
KeypadDisplay thumbnails.
MENURemote controlDisplays PC-LESS PRESENTATION Menu.
4. Utilize projector – Advanced - 
						

							


4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can also play the Slide show with the projector Menu.
Select “SLIDE SHOW” on PC-LESS PRESENTATION Menu. And press the Enter 
button on the remote control or ► button on Keypad.  Then Slide show will start.
You can play the Slide show at your desired configuration.
Configure the Slide Show items in THUMBNAIL.
1) START #   : Set the beginning number of Slide show.
2) STOP #   : Set the end number of Slide show.
3) INTERVAL   : Set the interval Slide show.
4) MODE   :   Select the Slide show mode. 
ONE TIME : Play the Slide show one time. 
ENDLESS : Play the Slide show endless.
5) PLAY   : Play the Slide show.
2%.5524506#6+10
6*7/$0#+.
5.+&5*19
&+4%64;&+52.#;5+
						

							


4.2.4 Director y display
Directory display (Fig.4.2.4) shows saved directories and files including 
undisplayable files in the memory card on the tree structure. Click the 
“DIRECTORY” button in the Web Remote Control, then the directory tree will be 
displayed. While displaying directory, preview picture of selected file is shown on 
the top left. In case of moving picture, initial flame is displayed as preview. Nothing 
is displayed in case of directories or undisplayable files. Displayable file can be 
played if “ENTER” is clicked when its file is selected. 
Select the directory and press the Enter button, then the files in the directory will 
be displayed in the thumbnail.
Fig. 4.2.4 Directory display screen
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Tree structure directory
File information 
Image display preview
4. Utilize projector – Advanced - 
						

							
64

4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
Following operations can be accessible while directory is displayed.
* These operations are not accessible while projector OSD menu is displayed.
• It is not possible to change the input port by INPUT button when 
THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
• Displays the projector Menu before changing the input port .
• Only alphanumeric characters can be used for directory name and file name.
• This directory display is able to show up to 10 layers. Over 10 layers of files 
and folders can not be shown. Some files and directories are not displayed 
if there are too many. In this case, delete some files in the directory or some 
directories in the memory card.
NOTE
▲/▼Moving selected item upward or downward.
►Open the closed folder.
◄Close the folder.
PAGE UP  PAGE DOWN
Remote control
Show undisplayed portion if the tree display is not fit inside the screen.
ENTER
INPUT
Remote control
Keypad
Play displayable file. While directory is selected, thumbnail is displayed. It is not possible to play undisplayable file. Click “ENTER” while playing, so it returns to the directory display.
MENURemote controlDisplays the menu.
4. Utilize projector – Advanced - 
						

							


4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
You can also display the directory with the projector Menu.
Select “DIRECTORY” in PC-LESS PRESENTATION Menu. And press the Enter 
button on remote control or ► button on Keypad. Then directory will be displayed.
[File information display]
 File information display shows following information.
Displayable still image file
- File format (JPEG, PNG and BMP)
- Time stamp (When file is created)
- File size (Size of File)
- Image size (File resolution)
Displayable moving image file
- File format (MP4)
- Time stamp (When the file is created)
- File size (Size of File)
- Movie size (File resolution)
- Movie time (Play time)
Undisplayable file
- File format (Directory: Directory, Undisplayable file: File)
- Time stamp (When file is created)
- File size (Size of File)
2%.5524506#6+10
6*7/$0#+.
5.+&5*19
&+4%64;&+52.#;5+
						

							


4.2.5 “PC-LESS Presentation” error message
Error message is displayed at a specific condition while “PC-LESS Presentation” 
mode. It appears at the bottom and the gray area of screen.
Fig. 4.2.5 “PC-LESS Presentation” error message
4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)
“PC-LESS Presentation” error message list
Error messageError contentDisplay mode
File not foundDisplayable file does not exist.Display in full screen and slide show
Illegal Playlist file
Play list file has malfunction. (Over 64kB file, over 1022 characters per line in file or linefeed code malfunction)
Display in full screen and slide show
4. Utilize projector – Advanced -