Dukane Imagepro 8944 Lcd Projector Users Manual



2. Equipment connection and network setting
Click the [Apply] button to save the settings.
Authentication Password
Configures the Authentication Password.The length of the text can be up to 16 alphanumeric characters.
Re-enter Authentication PasswordUsed to re-enter the above password for verification.
SNMPConfigures the community name if SNMP is used.
Community NameConfigures the community name.The length of the text can be up to 64 alphanumeric characters.
• The new configuration settings...

38

2. Equipment connection and network setting
2.5.9 Projector Control
The items shown in the table below can be 
performed using the [Projector Control] menu.
Select an item using the up and down arrow keys 
on the PC.
Most of the items have a submenu.
Refer to the table below for details.
Controls the projector.
ItemDescription
Main
PowerTurns the power On/Off.
Input SourceSelects the input source.
Picture ModeSelects the Picture Mode setting.
Blank On/OffTurns Blank On/Off.
MuteTurns Mute On/Off....



2. Equipment connection and network setting
2.5.9 Projector Control (Continued)
ItemDescription
Image
AspectSelects the Aspect setting.
Over ScanSelects the Over Scan setting.
V PositionAdjusts the V Position.
H PositionAdjusts the H Position.
H PhaseAdjusts the H Phase.
H SizeAdjusts the H Size.
Auto AdjustPerforms Auto Adjustment.
Input
ProgressiveSelects the progressive setting.
Video NRSelects the Video NR setting.
3D-YCSSelects the 3D-YCS setting.
Color SpaceSelects the Color Space....

40

2. Equipment connection and network setting
Option
LanguageSelects the Language for the OSD.
Menu Position VAdjusts the vertical Menu Position.
Menu Position HAdjusts the horizontal Menu Position.
BlankSelects the Blank mode.
StartupSelects the Startup screen mode.
MyScreen LockTurns MyScreen Lock On/Off.
MessageTurns the Message function On/Off.
Auto SearchTurns the Automatic signal search function On/Off.
Auto KeystoneTurns the Automatic keystone distortion correction function On/Off.
Auto onTurns...

41

2. Equipment connection and network setting
2.5.11 Network Restart
Restarts the projector’s network connection.
ItemDescription
RestartRestarts the projector’s network connection in order to activate new configuration settings.
• Restarting requires you to re-log on in order to further control or 
configure the projector via a web browser.
NOTE
2.5.12 Logoff
When logoff is clicked, the logon screen is displayed (21 : Fig. 2.5.a).
2.5.10 Projector Status
Displays and configures the current projector...

42

Open browser when it is possible to communicate with projector. Corresponding 
browser is Internet Explorer 5.5 or later.
Specify http://(projector IP address)/ to start.
For example, http://192.168.1.10/
(Input this URL when IP address is not changed.)
After start up, enter your ID and password, and click [Logon]. Following window 
appears as shown in fig. 2.6.a. 
You can use your Web browser to remote control the projector once the projector 
is properly configured and connected to your PC via the...

43

2.6 Utilize Web Remote Control (Continued)
Click “Remote Control” in this window to display Web Remote Control as shown in 
fig.2.6.b.
The same operation as the 
bundled remote control will done.
UP/LEFT/RIGHT/DOWN 
corresponds to ▲/◄/►/▼ 
respectively.
Each mode will be activated by 
clicking these buttons.
• LIVE MODE
• THUMBNAIL
• SLIDE SHOW
• DIRECTORY
Fig. 2.6.b Web Remote Control
• Web Remote Control does not support repeat function when it is kept 
clicking.
• Since automatic repeat function...

44

3. How to use Projector software – Basics -
This section explains how to use the “MIU Live Viewer”.
3.1 How to use “MIU Live Viewer”
3.1.1. Install “MIU Live Viewer”
In order to use the projector with a PC for Live Mode, you will first need to install 
the accompanying software on all the PCs you will be using.
 
• OS:    Windows 2000 Professional Service Pack4, 
 Windows XP Home Edition/Professional
• Graphic Interface:    DirectX 6.1a or higher; Video RAM 4MB or higher 
 (8MB recommended)
• CPU:...

45

3. How to use Projector software – Basics -
3.1.2. Software Installation Procedure
1) Turn on the PC.
2) Shut down all applications.
3)  Insert the accompanying CD-ROM into the 
PC's CD-ROM drive.
4)  After a moment, the Welcome to MIU Utilities 
Setup dialog will appear as shown on the right. 
Press Next.
If the Welcome to MIU Utilities Setup dialog doesn't appear, proceed as 
follows:
(1) Click on the Start button on the toolbar and select Run.
(2) Enter E:\software\setup.exe and then...

46

3.1 How to use “MIU Live Viewer” (Continued)
Fig. 3.1.3.a “MIU Live Viewer” Window
3.1.3 Explanation of  “MIU Live Viewer”
Double click “LiveViewer.exe” to start up. Fig. 3.1.3.a appears on your screen.
w
r
q
e
s
y
u
t
aoi
3. How to use Projector software – Basics -
8)  The Hardware Installation dialog appears. 
Press Continue Anyway.
9)  After a moment, installation will complete and 
the Setup Complete dialog will appear as 
shown on the right. Click Finish.
   This completes the software...