Dukane Imagepro 8768 Liquid Crystal Projector Users Manual

61
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is...

62
5. Using the Viewer
Deleting Captured Images
Using the Delete command on the Viewer menu allows you to delete captured images.
To delete captured images:
Preparation: Make sure that the PC card is inserted into the PC card slot of the projector.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
_CAP_
_RESTORE
RECYCLED
1/3  0000.jpg 60KBselect :  ENTERfolder :  CANCEL
?
3. Use the  button...

63
5. Using the Viewer
This completes deleting.
To delete all the captured images:
1. Repeat steps 1 to 3 in the above described procedure.
2. Press the CANCEL button to select the “__CAP__” folder in the directory (pane on the left).
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
__CAP__
_RESTORE
RECYCLED
1/3  0000.jpg 60KBselect :  ENTER
?
3. Press the MENU button to display the Viewer menu.
4. Use the  button to select “Delete” and then press the ENTER button.
5. Use the 
 button to select “OK” and then...

64
5. Using the Viewer
 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available.
Preparation:
Use the Capture feature to store JPEG or BMP files in a PC card inserted into the projector’s slot. Or store JPEG
or BMP files in a PC card inserted into your PC’s slot and insert the PC card into the projector’s slot.
1. Press the VIEWER button on the remote control to display an...

65
6
Using Dynamic Image Utility 2.0
on the supplied CD-ROM
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

  End User License Agreement ................................... 66
  Introduction ............................................................... 67
  Operating Environment ............................................. 68
  Equipment Connections and Settings ...................... 69
  Software Installation ................................................. 69
  Starting/Exiting the Software...

66
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
Be sure to read this before installing and using the accompanying software.

 END USER LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (LICENSE) CAREFULLY BEFORE INSTALLING THE
SOFTWARE. IT PROVIDES THE TERMS OF THIS LICENSE.
WHILE INSTALLING THE SOFTWARE, THIS SOFTWARE LICENSE AGREEMENT WILL BE DISPLAYED. BY CLICK-
ING ON THE Yes BUTTON, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. FOLLOW THE
DIRECTIONS ON THE SCREEN AND...

67
7. Limitations of Liability
In no event shall NECVT be responsible for any indirect, consequential or special damages or lost profits even if
NECVT has been advised of the possibility of such damages, and/or for any claim for compensation or damage by any
third party to User.
8. Others
1)The v alidity, inter pretation, constr uction and performance of EULA shall be go ve rned b y the la ws of J apan.
2) User shall not e xport the Softw are to any country to which such e xport would be prohibited b y...

68
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
Image Express Utility 1.0 (not available on this model)
•Using a network environment, this program enables the screen image displayed by the personal computer to be
sent to the projector and then projected to a screen.
•Two methods are available for sending the screen image to the projector. Continuous Transmit automatically
sends the screen image of the personal computer at a fixed interval. Single Frame Transmit sends the screen
image by...

69
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
 Equipment Connections and Settings
When Making Connections with Serial Cable
What Can Be Accomplished
 • Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then projected to a screen.
 • Using the projector control function of Dynamic Image Utility 2.0 allows operations to be performed from the per-
sonal computer which include switching the projector power on/off, signal selection, and adjustment of the...

70
2. Click Please read this first and read the Readme about Dynamic Image Utility 2.0.
3. Click Installing the Dynamic Image Utility 2.0.
   The “Welcome” screen will appear.
4. Click [Next >] at the Welcome screen.
   The End User License Agreement screen will appear.
Please carefully read the contents of the End User License Agreement.
5. If you agree, click [Yes].
If you do not agree, please click [No] and exit the installer.
6. Now, follow the operations described in the screen messages.
To cancel...