Dukane Imagepro 8768 Liquid Crystal Projector Users Manual

41
4. Convenient Features
 Using the Pointer
Press the Pointer button to
display the pointer.
Use the Select button to move
the pointer.
SOURCE
FREEZE VIEWER3D REFORMASPECT
HELP
PICTUREPIC-MUTEPOINTER
VOLUME MAGNIFY
SLIDE
You can use one of nine pointers to draw your
audiences attention to the portion of a projected im-
age you want.
NOTE: You can select one pointer from the menu. See page
99.
Press the POINTER button to display the pointer.
Use the SELECT button to move the pointer.
Press the POINTER...

42
 Getting the On-line Help
You get the contents about Help.
Display Help
Exit Help
4. Convenient Features
PJ
SOURCE
FREEZE VIEWER3D REFORMASPECT
HELP
PICTUREPIC-MUTEPOINTER
VOLUME MAGNIFY
SLIDE
AC IN
COMPONENT
YCb/Pb Cr/Pr
AUDIO
AUDIO AUDIO
AUDIOL/MONO
S-VIDEO COMPUTER 1 AUDIO PC CARDUSB(COMPUTER)USB(MOUSE)MONITOR OUT
COMPUTER 2 PC CONTROLR
L/MONO VIDEO R
USB(MOUSE) Using a USB Mouse
Using a USB mouse gives you a smooth operation. A commercially
available USB mouse can be used.
NOTE: There may be...

43
4. Convenient Features
 Using the Remote Mouse Function
The built-in remote mouse function enables you to operate your computers mouse functions from the remote control
(Computer mode).
It is very convenient for clicking through your computer-generated presentations. To return to the projector operation
mode (Projector mode), press the PJ button (lit red).
Connecting to your computer for the remote mouse function
If you wish to use the remote mouse function, use the supplied USB cable to connect the...

44
	 Correcting Horizontal and Vertical Keystone Distortion (Cor-
nerstone)
Use the 3D Reform feature to correct keystone (trapezoidal) distortion to make the top or bottom and the left or right
side of the screen longer or shorter so that the projected image is rectangular.
4. Convenient Features
Screen
Projected image
Cornerstone
1. Press and hold the 3D REFORM button for a minimum of 2 seconds to reset current adjustments.
Current adjusments for “Keystone” or “Cornerstone” will be cleared.
2. Project...

45
Screen
8. Press the ENTER button.
4. Convenient Features
10.Press the SELECT  or  button to highlight the [OK] and press the ENTER button.
This completes the keystone correction.
Selecting “Cancel” will return to the adjustment screen without saving changes (Step 3).
Selecting Reset will return to the factory default.
Selecting Undo will exit without saving changes.
NOTE: To return the 3D Reform correction setting values to the factory default, press and hold the 3D REFORM button for a
minimum of 2...

46
The adjustable ranges for 3D Reform are as follows:
4. Convenient Features
*The following are conditions under which the maximum angle is achived:
•Image (100) is projected in Wide (Zoom lever)
•Resolution is XGA
Higher resolution than XGA narrows the adjustable range.
•Menu items should be set as follows:
Aspect Ratio ........... 4:3
Screen Type ........... 4:3
•Horizontal and Vertical are adjusted separately.
A combination of both adjustments narrows the adjustable range.
•When 4:3 Fill is selected...

47
4. Convenient Features

 Making Freehand Drawings on a Projected Image
(ChalkBoard)
The ChalkBoard feature allows you to write and draw messages on a projected image.
NOTE: The ChalkBoard feature is available only when a USB three-button mouse is used.
To display or hide the ChalkBoard tool bar, click the middle button on your mouse.
The tool bar contains the following icons.

 Drag ................. Drags to move the tool bar.
 Pen ................... Left-click and drag to draw. Left-click 
 or...

48
4. Convenient Features
 Storing Images Displayed on the Projector on the PC card or
USB memory (Capture)
The Capture features allows you to capture an image from a source that is currently being displayed. The image is
saved as JPEG in the PC card or USB memory.
NOTE:
•Unless a PC card or USB memory is inserted into the PC Card slot or USB (MOUSE) port of the projector, the Capture feature is
not available.
•The Card Error display means that the free space of the PC card or USB memory is insufficient...

49
4. Convenient Features
 Preventing the Unauthorized Use of the Projector
Assigning a keyword prevents the projector from being used by unauthorized individuals.
Assigning a Keyword for the first time
1. Press the MENU button.
The menu will be displayed.
2. Press the SELECT  button twice to highlight the Setup submenu and press the ENTER button.
The page tab “1” will be highlighted.
3. Press the SELECT  button once to highlight the page tab “2”. 

50
4. Convenient Features
4. Press the SELECT  button four times to highlight “Security”.
5. Press the ENTER button to display the Security screen.
6. Press the ENTER  button once to highlight the Keyword entry box and press the ENTER button.
The Software keyboard will be displayed.