Dukane Imagepro 8768 Liquid Crystal Projector Users Manual

81
Turning On/Off 3 Dimension Separation [3D Y/C Separation]
This function turns on or off the 3 dimensional separation feature.
When On is selected, the following three options are available from the pull-down list.
Still ........................ Select this option for a still image.
Normal .................. The projector automatically makes the appropriate settings for a detected source.
Movie .................... Select this option for a moving image.
NOTE: This feature is available for NTSC3.58 of...

82
Controlling Bass and Treble [Sound]
You can adjust the bass and treble level of the projector speakers and AUDIO OUT (Stereo Mini Jack).
 Menu Descriptions & Functions [Image]
[Page 1]
Selecting Aspect Ratio [Aspect Ratio] (not available for Viewer)
Screen Type  4:3 Screen Type  16:9
Aspect Ratio allows you to select the best Aspect mode to display your source image.
When screen type 4:3 is selected for the source, the following selections will display:
4:3 ......................... Standard 4:3...

83
When screen type 16:9 is selected for the source, the following selections will display:
4:3 Window ........... Reduced to display the true aspect with black borders on right and left
Letter Box .............. Standard 16:9 aspect
Wide Screen .......... Left and right stretched to display the true aspect
4:3 Fill ................... Stretched to display in 16:9 aspect ratio
NOTE: You can adjust image positions vertically for source with black borders. See page 85 for setting
image positions....

84
Adjusting Clock and Phase [Pixel Adjust]
This allows you to manually adjust Clock and Phase.
Clock
Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function
adjusts the clock frequencies that eliminate the horizontal banding in the image.
This adjustment may be necessary when you connect your computer for the first time.
Phase
Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk. (This is evident
when...

85
 Menu Descriptions & Functions [Setup]
Setup [Page1]
Selecting Aspect Ratio and Position for Screen [Screen]
Screen Type
Select one of three options: 4:3 Screen or 16:9 Screen for the screen to be used. See also Aspect Ratio on
pages 82 and 83.
Position
This feature adjusts the vertical position of the image when viewing video with an aspect ratio selected.
When some aspect ratios are selected in Image, the image is displayed with black borders on the top and bottom.
You can adjust the vertical...

86
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
NOTE: Selecting one of the other options than “Desktop Front” will force the “Keystone” mode to be “Manual.
Selecting Menu Language [Language]
You can choose one of 19 languages for on-screen instructions.
Setting Lamp Mode to Normal or Eco [Lamp Mode]
This feature enables you to...

87
Selecting Keystone Mode [Keystone]
This feature allows you to correct keystone distortion manually or automatically.
Auto ...................... This feature allows the projector to detect its tilt and correct vertical distortion automatically.
Manual .................. You can correct vertical distortion manually from the menu.
Changes will be saved even when you turn off the projector.
Selecting Menu Display Time [Menu Display Time]
This option allows you to select how long the projector waits after...

88
Setup [Page2]
Disabling the Cabinet Buttons [Cabinet Button]
This option turns on or off the Cabinet Button Lock function.
NOTE:
•This Cabinet Button Lock does not affect the remote control functions.
•When the cabinet buttons are locked, pressing and holding the CANCEL button for about 10 seconds will change the setting to
unlock.
Using Sleep Timer [Sleep Timer]
1. Select your desired time between 30 minutes and 16 hours: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.
2. Press the ENTER button on...

89
Setting a Password [Password (Logo)]
A password can be set for your projector to avoid operation by an unauthorized person.
When a password is set, doing any one of the following two operations will display the Password input screen.
•Changing the background
•Changing the logo data in a PC card
Entry:
To assign your password:
NOTE: Up to 15 alphanumeric characters can be assigned.
1. Type a password.
Highlight Entry and press the ENTER button.
The Enter the Password screen will be displayed.
Make sure...

90
Security
The Security function enables you to protect your projector so that the projector will not project a signal unless you
enter a keyword. There is also an option to lock the projector by using a registered PC card as a protect key. Once you
have registered your PC card as a protect key, you are required to insert the registered PC card into the PC card slot
of the projector each time you turn on the projector. You can enable the Security function by using a keyword only.
Enable/Disable ..........