Dukane Imagepro 8768 Liquid Crystal Projector Users Manual

							61
Switching to Slides Directly from Other Input Modes
With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.
Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it is
possible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the Viewer
button.
NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to the
Viewer, you will get the slide that has been retained.
Viewing Digital Images
Digital images can be played with the Viewer if the following conditions are met:
•If the image can be stored on an MS-DOS format PC card.
•If the image can be stored in a format supported by the Viewer. With the Viewer, images on the card are
searched for in directories and images in JPEG or BMP format are recognized as slides. Searchable directories
are directories within two steps from the root directory, and searchable images are images within the first 12
files in the directory. Only file and slide switching are possible.
NOTE: The maximum number of images recognized as slides within one directory is 128.
5. Using the Viewer 
						

							62
5. Using the Viewer
Deleting Captured Images
Using the Delete command on the Viewer menu allows you to delete captured images.
To delete captured images:
Preparation: Make sure that the PC card is inserted into the PC card slot of the projector.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
_CAP_
_RESTORE
RECYCLED
1/3  0000.jpg 60KBselect :  ENTERfolder :  CANCEL
?
3. Use the  button to select “Thumbnails” and then press the ENTER button.
The Thumbnail screen will be displayed.
NOTE: To change highlight from the Thumbnails screen (pane on the right) to a directory tree (pane on the left) , press the
CANCEL button. To return highlight to the Thumbnails screen, press the ENTER button.
4. Use the 

 buttons to select an image you wish to delete.
5. Press the MENU button to display the Viewer menu.
6. Use the 
 button to select “Delete” and then press the ENTER button.
A confirmation message will be displayed.
7. Use the  button to select “OK” and then press the ENTER button. 
						

							63
5. Using the Viewer
This completes deleting.
To delete all the captured images:
1. Repeat steps 1 to 3 in the above described procedure.
2. Press the CANCEL button to select the “__CAP__” folder in the directory (pane on the left).
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
__CAP__
_RESTORE
RECYCLED
1/3  0000.jpg 60KBselect :  ENTER
?
3. Press the MENU button to display the Viewer menu.
4. Use the  button to select “Delete” and then press the ENTER button.
5. Use the 
 button to select “OK” and then press the ENTER button.
This completes deleting.
NOTE: The vacant __CAP__ folder stays even after you delete all the captured images.
A confirmation message will be displayed. 
						

							64
5. Using the Viewer
 Changing Background Logo
You can change the default background logo using the Viewer feature.
NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP are not available.
Preparation:
Use the Capture feature to store JPEG or BMP files in a PC card inserted into the projector’s slot. Or store JPEG
or BMP files in a PC card inserted into your PC’s slot and insert the PC card into the projector’s slot.
1. Press the VIEWER button on the remote control to display an image.
2. Press the MENU button to display the Viewer menu.
0000.jpg0001.jpg0002.jpg 3 Files
Slot 1
_CAP_
_RESTORE
RECYCLED
1/3  0000.jpg 60KBselect :  ENTERfolder :  CANCEL
?
3. Use the  button to select “Thumbnails” and then press the ENTER button.
The Thumbnail screen will be displayed.
NOTE: To change highlight from the Thumbnails screen (right window) to a directory tree (left window) , press the CANCEL
button. To return highlight to the Thumbnails screen, press the ENTER button.
4. Use 

 button to select a JPEG or BMP file (slide) for your background logo.
5. Press the MENU button to display the Viewer menu.
6. Use the 
 button to select Logo and then press the ENTER button.
A confirmation dialog box will be displayed.
7. Use the 
 button to select “OK” and press the ENTER button. This completes changing a logo for the
background.
*Once you have changed the background from the NEC logo to another, you cannot return the logo to back-
ground even by using “Reset”. 
						

							65
6
Using Dynamic Image Utility 2.0
on the supplied CD-ROM
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

  End User License Agreement ................................... 66
  Introduction ............................................................... 67
  Operating Environment ............................................. 68
  Equipment Connections and Settings ...................... 69
  Software Installation ................................................. 69
  Starting/Exiting the Software .................................... 70
  Troubleshooting ........................................................ 72
(English version only) 
						

							66
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
Be sure to read this before installing and using the accompanying software.

 END USER LICENSE AGREEMENT
PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (LICENSE) CAREFULLY BEFORE INSTALLING THE
SOFTWARE. IT PROVIDES THE TERMS OF THIS LICENSE.
WHILE INSTALLING THE SOFTWARE, THIS SOFTWARE LICENSE AGREEMENT WILL BE DISPLAYED. BY CLICK-
ING ON THE Yes BUTTON, YOU ARE CONSENTING TO BE BOUND BY THIS AGREEMENT. FOLLOW THE
DIRECTIONS ON THE SCREEN AND COMPLETE THE INSTALLATION PROCESS.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, CLICK THE No BUTTON. THE INSTAL-
LATION PROCESS WILL NOT CONTINUE.
Viewtechnolog y,Ltd.(NECVT) g rants  you (User) a license to use the P ROJEC TOR USER SUPPO RTW ARE
(Software) provided with this End User License Agreement (EULA). User assumes responsibility for the selection,
adoption use and the result of use of the Software to achieve its intended result.
1. Term
1) EULA will become eff ective upon Users ag reement to the ter ms of EULA and shall remain in f orce until User
ter minates it b y retur ning or destro ying the Softw are and its related documents .
2) Notwithstanding the f oregoing NECVT may terminate EULA at an y time upon User failing to abide by an y ter ms
of EULA.  Upon the ter mination of the EULA b y NECVT , the license g ranted to User shall be ter minated automati-
cally . User ag rees to destro y the Software together with all copies of it upon such ter mination.
2. License
User use the Software on personal computers only for operating NECVTs projector supplied with the Software or
other projector to be specified by NECVT(Projector)
3. Replication, modification and merger of the Software
1)User ma y make copies of the Softw are and related documentation to the e xtent necessary for using the Projec-
tor . User ag rees to reproduce the NECVTs cop yright notice and other notice on an y such copies.
2) User ma y not use , copy, modify , or otherwise dispose of the Softw are, except as e xpressly per mitted in EULA.
3) No pro vision in EULA shall be constr ued to assign and/or transfer an y intellectual proper ty right in the Softw are
to User .
4. Transfer of the Software
1)User ma y transf er the Softw are to any third par ty, provided alw ays that:
a) User m ust transfer, with the Softw are, to such third par ty EULA and all the related
documentation with all copies thereof , and must not retain any copy thereof .
b) Such third par ty has agreed to the ter ms and conditions of EULA.
2) Except as otherwise e xpressly permitted above , User ma y not sublicense, assign, tr ansfer or otherwise dispose
of the license f or the Software.
5. Reverse Engineering
User may not reverse engineer, decompile, and/or disassemble the Software, except and only to the extent that such
activity is expressly permitted by applicable law notwithstanding this limitation.
6. Limitations of Warranty
1)Except as e xpressly specified herein, the Softw are is provided as is without w arranty of an y kind, including b ut
not limited to implied w arranties f or fitness f or a particular pur pose, merchantability , title and non-infringement of
an y third par ty rights.
2) If User finds a mater ial defect, which eff ects to the proper oper ation of the Software, in the media of the Soft-
w are , NECVT will replace such def ective media at no charge , if such media is retur ned to distributor from which
such User purchased it within 1 month from such purchase and if NECVT de\
ter mines that such defect is due to
NECVT . 
						

							67
7. Limitations of Liability
In no event shall NECVT be responsible for any indirect, consequential or special damages or lost profits even if
NECVT has been advised of the possibility of such damages, and/or for any claim for compensation or damage by any
third party to User.
8. Others
1)The v alidity, inter pretation, constr uction and performance of EULA shall be go ve rned b y the la ws of J apan.
2) User shall not e xport the Softw are to any country to which such e xport would be prohibited b y an y applicab le
la ws .
 Introduction
Thank  you  for  your purchase of the  8768 porta ble projector (hereafter re ferred to as unit or projector).
This projector is connected to a personal computer or other equipment an\
d clearly projects text or graphics to a
screen.
This projector is supplied with convenient software that allows presentations to be made more simply and effectively.
This guide gives an overview and describes the use of the accompanying software (contained in the CD-ROM that is
supplied with this projector). Look over this guide in conjunction with the Help functions of the software programs.
Contents of the Supplied CD-ROM
The supplied CD-ROM contains the following software programs:
• Dynamic Image Utility 2.0
•  Vie wer PPT Con ve rter 2.0
• Image Express Utility 1.0 (not a vailab le on this model)
Please see the Help functions of the software programs for information about their functions and operation.
What Can Be Accomplished with the Supplied Software
Dynamic Image Utility 2.0
•Con ve rts P owerP oint files , JPEG images , and other files and creates slides that can be displa yed with the vie wer
function of the projector .
• Captures portions of the image from the screens of word processors, spre\
adsheets, browsers, and other pro-
grams for use in presentations.
• By sa ving the created slides on a flash memor y card (*) and inserting the card into the PC Card slot of the
projector , the slides can be projected to the screen without connecting a persona\
l computer .
* Please purchase a commercially a vailab le PCMCIA  Type 2 (A TA  specification) flash memor y card.
• The connection of personal computers and projectors b y means of connection with ser ial cable (*) allo ws the
f ollo wing uses .
* A networ k connection is not abailab le on this model.
(1) Images and slides can be sent from the personal computer to the projecto\
r and then projected to the screen.
When using Microsoft P owerP oint 2000/2002, slides can be sent synchroniz ed with the slide show page feed.
(2) A personal computer can be used to s witch the projector power on/off , control the adjustment of image
quality and other settings, and to display the remaining lamp life.
Viewer PPT Converter 2.0
• Con ve rts files created with Microsoft P owerP oint 95/97/2000/2002 to an independent inde x format with a simple
oper ation to enab le direct playback with the vie wer function of the projector .
• When using Microsoft P owerP oint 2000/2002,  Viewer PPT Con ve rter 2.0 can be star ted from Pow erP oint (b y
means of add-in registration to PowerPoint).
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM 
						

							68
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
Image Express Utility 1.0 (not available on this model)
•Using a network environment, this program enables the screen image displayed by the personal computer to be
sent to the projector and then projected to a screen.
•Two methods are available for sending the screen image to the projector. Continuous Transmit automatically
sends the screen image of the personal computer at a fixed interval. Single Frame Transmit sends the screen
image by clicking the screen button (or pressing a key).
Information about Upgrading this Software
Please see the service page for NEC projectors (http://www.nec-pj.com/) for information about software upgrades of
NEC Projector User Supportware (i.e., Dynamic Image Utility and Viewer PPT Converter).
 Operating Environment
Supported Equipment
CPU
Memory
Supported OS
Resolution
Screen ColorsIBM PC/AT compatible computers
• CD-ROM drive a requirement (at time of installation)
Pentium MMX processor or higher a requirement
Pentium III 800 MHz or higher recommended
For Windows XP
• 128 MB or more a requirement
• 192 MB or more recommended
For other operating systems
• 64 MB or more a requirement
• 128 MB or more recommended
More memory may be necessary when other applications are run at the same time.
Windows 98
Windows 98 Second Edition
Windows Me
Windows 2000 Professional
Windows XP Home Edition
Windows XP Professional/Windows XP Tablet PC Edition
*Microsoft Internet Explorer 5.01 or higher is required for the aforementioned environments.
*Does not support Windows power-saving function.
1024 dots x 768 lines recommended
High Color (15 bit, 16 bit)
True Color (24 bit, 32 bit) 
						

							69
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM
 Equipment Connections and Settings
When Making Connections with Serial Cable
What Can Be Accomplished
 • Using Dynamic Image Utility 2.0, a picture or slide can be sent to the projector and then projected to a screen.
 • Using the projector control function of Dynamic Image Utility 2.0 allows operations to be performed from the per-
sonal computer which include switching the projector power on/off, signal selection, and adjustment of the picture
quality.
[For Connections with Serial Cable]
Equipment to Be Prepared
•Projector (This unit)
•Personal computer
•Serial cable not included with the projector (Optional CA03D is available)
Connection at the Projector Side
Plug the serial cable into the PC CONTROL connector. (“Terminal Panel Features” and “PC Control Connector” on
pages 16 and 119)
Connection at the Personal Computer Side
Plug the serial cable into the (RS-232C) serial connector.
 Software Installation
NOTE
•Windows 98 operations will be described in examples given here.
•When using Windows 2000, please perform software installation/uninstalling with Administrators authority. When using Win-
dows XP, perform with Computer Administrator authority.
Dynamic Image Utility 2.0 Installation
Dynamic Image Utility 2.0 and Viewer PPT Converter 2.0 will all be installed together. The various programs cannot be
installed individually.
Preparation:
Start Windows.
If Windows has already been started, please exit all running application software. The installation may not be com-
pleted properly unless all software has been exited.
1. Place the supplied CD-ROM in the CD-ROM drive.
The Startup screen will appear.
Reference
Should the Startup screen not appear...
1) Click [Start].
2) Click [Run (R)]. The [Run] screen will appear.
3) Enter the CD-ROM drive name (e.g., Q: \) and then SETUP.EXE to [Open (O)].
4) Click [OK]. The Startup screen will appear. 
						

							70
2. Click Please read this first and read the Readme about Dynamic Image Utility 2.0.
3. Click Installing the Dynamic Image Utility 2.0.
   The “Welcome” screen will appear.
4. Click [Next >] at the Welcome screen.
   The End User License Agreement screen will appear.
Please carefully read the contents of the End User License Agreement.
5. If you agree, click [Yes].
If you do not agree, please click [No] and exit the installer.
6. Now, follow the operations described in the screen messages.
To cancel the installation of the supplied software part way through the installation, click [Cancel] and follow the
instructions of the dialog box.
Please remove the CD-ROM from the CD-ROM drive when the installation is completed.
Uninstalling
Dynamic Image Utility 2.0 and Viewer PPT Converter 2.0 will all be uninstalled together. The various programs cannot
be uninstalled individually.
1. Click [Start].
2. Click [Settings] 
→ [Control Panel].
The Control Panel screen will be displayed.
3. Double click [Add/Remove Programs].
The Add/Remove Programs Properties screen will appear.
4. Click Dynamic Image Utility 2.0 from the list.
5. Click [Add/Remove. . . ].
The Confirm File Deletion screen will appear.
6. Check the message and click [Yes].
7. Now, follow the operations described in the screen messages.
When the uninstall procedure is completed, there will be a return to the Add/Remove Programs Properties screen.
8. Click [OK].
There will be a return to the Control Panel screen
 Starting/Exiting the Software
Dynamic Image Utility 2.0
Start the Software
Preparation:
Install the software on the personal computer from the supplied CD-ROM. (Page 69)
The software cannot be started from the supplied CD-ROM.
From the [Start] menu click [Program] → [NEC Projector User Supportware] → [Dynamic Image Utility 2.0].
Dynamic Image Utility 2.0 will start.
Reference
•By selecting a PowerPoint file with Dynamic Image Utility 2.0 and clicking [Tools] → [Converting PowerPoint file], the
function equivalent to Viewer PPT Converter 2.0 can be executed.
6. Using Dynamic Image Utility 2.0 on the supplied CD-ROM