Dukane Imagepro 8112 Projector Users Manual

51
OPTION menu
Item Description
SERVICE
(continued)KEY LOCK
Using the ▲/▼ buttons turns on/off the key lock feature. When ON 
is selected, the buttons on the projector except the STANDBY/ON 
button are locked.
ON 
 OFF
• Please use this function to prevent tampering or accidental 
operation. This function does not have any effect on the remote 
control.
REMOTE FREQ.
(1)  Use the ▲/▼ button to change the projector's remote sensor 
frequency setting (
5).
1:NORMAL 
 2:HIGH
(2)  Use the ◄/► button to...

52
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
COMMUNICATION TYPE
Select the communication type for transmission via 
the CONTROL port.
NETWORK BRIDGE
 
 OFF
NETWORK BRIDGE: 
Select this type, if it is 
required to control an external device as a network 
terminal, via this projector from the computer. 
The CONTROL port doesn't accept RS-232C 
commands.(
Controlling the external device 
via the projector (using the NETWORK BRIDGE 
function) of the User’s Manual -...

53
OPTION menu
Item Description
SERVICE
(continued)
COMMUNICATION
(continued)
RESPONSE LIMIT TIME
Select the time period to wait for receiving 
response data from other device communicating by 
the NETWORK BRIDGE and the HALF-DUPLEX 
through the CONTROL port.
OFF 
 1s 
 2s 
 3s
    
OFF: Select this mode if it is not required to check 
the responses from the device that the projector 
sends data to. In this mode, the projector can 
send out data from the computer continuously.
1s /2s /3s: Select the...

54
OPTION menu
Item Description
SERVICE
(continued)INFORMATION
Selecting this item displays a dialog titled “INPUT_INFORMATION”. 
It shows the information about the current input.
• The “FRAME LOCK” message on the dialog means the frame lock 
function is working. 
• This item can't be selected for no signal and sync out.
• When the MY TEXT DISPLAY is set to ON, the MY TEXT is 
displayed together with the input information in the INPUT_
INFORMATION box (
65).
FACTORY RESET
Selecting OK using the ►...

55
NETWORK menu
Remember that incorrect network settings on this 
projector may cause trouble on the network. Be sure 
to consult with your network administrator before 
connecting to an existing access point on your 
network.
Select “NETWORK” from the main menu to access 
the following functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor button on the projector or remote control, or ENTER 
button on the remote control to execute the item....

56
NETWORK menu
Item Description
SETUP
(continued)IP ADDRESSUse the ▲/▼/◄/► buttons to enter the IP 
ADDRESS. 
This function can only be used when DHCP is set 
to OFF.
• The IP ADDRESS is the number that identifies 
this projector on the network. You cannot have two 
devices with the same IP ADDRESS on the same 
network.
• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET 
MASKUse the ▲/▼/◄/► buttons to enter the same 
SUBNET MASK used by your computer. 
This function can only be used when DHCP is set 
to...

57
NETWORK menu
Item Description
PROJECTOR 
NAME(1)  Use the ▲/▼ buttons on the 
NETWORK menu to select the 
PROJECTOR NAME and press 
the ► button. The PROJECTOR 
NAME dialog will be displayed.
(2)  The current PROJECTOR NAME will be displayed on the first 3 
lines. If not yet written, the lines will be blank.
Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to 
select and enter characters.
To erase 1 character at one time, press the RESET button or 
press the ◄ and INPUT button at the same time....

58
NETWORK menu
Item Description
MY IMAGESelecting this item displays the MY 
IMAGE menu. 
The application software “PJImage” 
is required to store image(s) into the 
projector.
Use the ▲/▼ buttons to select an item which is a still image by the 
MY IMAGE (
 MY IMAGE (Still Image Transfer) Display of the 
User’s Manual - Network Guide) and the ► or ENTER button to 
display the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16 characters or less.
To...

59
NETWORK menu
Item Description
INFORMATIONSelecting this item displays the NETWORK_INFORMATION dialog 
for confirming the network settings.
• Only the first 16 characters of the projector neme are displayed.
• Nothing (blank) is shown in the “PROJECTOR NAME” field until 
you setup the item (
57).
• When the voltage level of the battery for the built in clock 
decreases, the set time may become incorrect even though accurate 
date and time are input. Replace the battery suitably
 (69).
• IP ADDRESS,...

60
SECURITY menu
This projector is equipped with security functions.
From the SECURITY menu, items shown in the table 
below can be performed.
To use SECURITY menu: User registration is required 
before using the security functions.
Enter the SECURITY menu
1.  Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER PASSWORD and press the 
► cursor (or the ENTER) button. The ENTER PASSWORD box will be displayed.  
2.  Use the ▲/▼/◄/► cursor buttons to enter the registered password. 
The factory...