Dukane Imagepro 8112 Projector Users Manual

61
SECURITY menu
Item Description
MyScreen 
PASSWORD
The MyScreen PASSWORD function can be used to prohibit access to the 
MyScreen function and prevent the currently registered MyScreen image 
from being overwritten.
1 Turning on the MyScreen PASSWORD1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select MyScreen PASSWORD and 
press the ► cursor (or the ENTER) button to 
display the MyScreen PASSWORD on/off menu.
1-2  
Use the ▲/▼ cursor buttons on the MyScreen 
PASSWORD on/off menu to select...

62
SECURITY menu
Item Description
PIN LOCK
The PIN LOCK is a function which prevents the projector from being used 
unless a registered Code is input.
1 Turning on the PIN LOCK1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select PIN LOCK and press the ► 
cursor (or the ENTER) button to display the PIN 
LOCK on/off menu.
1-2  Use the ▲/▼ cursor buttons on the PIN 
LOCK on/off menu to select ON and the 
Enter PIN Code box will be displayed. 
1-3  Input a 4 part PIN code using the 
▲/▼/◄/►cursor...

63
SECURITY menu
Item Description
TRANSITION 
DETECTOR
~Transition Detector alarm shown below might appear on
screen, if the projector has been moved or re-installed.
~ Transition Detector alarm might appear on screen, if the
MIRROR setting has been changed.
• To display the signal again, set this function to the OFF.
• After about 5 minutes of displaying the TRANSITION DETECTOR ON 
alarm, the lamp will turn off.
• Keystone adjustment feature has been prohibited as long as the Transition 
Detector...

64
SECURITY menu
Item Description
MY TEXT 
PASSWORD
The MY TEXT PASSWORD function can prevent the MY TEXT from being 
overwritten. When the password is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit 
changing the DISPLAY setting.
• The MY TEXT WRITING menu will be unavailable, which can prevent the 
MY TEXT from being overwritten.
1 Turning on the MY TEXT PASSWORD1-1  Use the ▲/▼ cursor buttons on the SECURITY 
menu to select the MY TEXT PASSWORD and 
press the ►...

65
SECURITY menu
Item Description
MY TEXT 
DISPLAY
(1)  Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY 
TEXT DISPLAY and press the ► cursor (or the ENTER) button to display 
the MY TEXT DISPLAY on/off menu.
(2)  Use the ▲/▼ cursor buttons on the MY TEXT 
DISPLAY on/off menu to select on or off.
ON 
 OFF
When it is set to the ON, the MY TEXT will be 
displayed on the START UP screen and the 
INPUT_INFORMATION when the INFORMATION 
on the SERVICE menu is chosen.
• This function is...

66
Maintenance 
Maintenance
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, make contact with your dealer and tell the lamp type number.
Replacing the lamp
Type number : 456-8112  
1.Turn the projector off, and unplug the power...

67
Maintenance
Lamp warning
Replacing the lamp (continued)
 HIGH VOLTAGE  HIGH TEMPERATURE HIGH PRESSURE
►The projector uses a high-pressure mercury glass lamp. The lamp 
can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or 
worn over time. Note that each lamp has a different lifetime, and some may burst or 
burn out soon after you start using them. In addition, if the bulb bursts, it is possible 
for shards of glass to fly into the lamp housing, and for gas containing...

68
Maintenance
Cleaning and replacing the air filter
The air filter has two kinds of filters inside. Please check and clean the air filter periodically. 
When the indicators or a message prompts you to clean the air filter, comply with it as soon 
as possible. If the filters are damaged or heavily soiled, replace them with the new ones. To 
prepare the new filters, make contact with your dealer and tell the following type number.
Type number : UX35971 (Filter unit)
When you replace the lamp, please replace the...

69
WARNING  ►Always handle the batteries with care and use them only as 
directed. Battery may explode if mistreated. Do not recharge, disassemble or 
dispose of in fire. 
 
And also improper use may result in cracking or leakage, which could result in 
fire, injury and/or pollution of the surrounding environment.
~  Be sure to use only the batteries specified.
~ Make sure the plus and minus terminals are correctly aligned when loading a battery.
~ 
 Keep a battery away from children and pets. If...

70
Maintenance
Other care
In order to ensure the safe use of your projector, please have it cleaned and 
inspected by your dealer about once every year.
1.Turn the projector off, and unplug the power cord. Allow the projector to cool 
sufficiently.
2.After making sure that the projector is cool adequately, lightly wipe the lens 
with a commercially available lens-cleaning wipe. Do not touch the lens 
directly with your hand. • If the lens is flawed, soiled or fogged, it can cause deterioration in display...