Dukane Imagepro 8112 Projector Users Manual

41
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
LANGUAGEUsing the ▲/▼/◄/► cursor buttons switches the OSD (On Screen 
Display) language.
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL...  
(shown in the LANGUAGE dialog)
Press the ENTER (or the INPUT) button to save the language setting....

42
SCREEN menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and the START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER (or the INPUT) button when the image is...

43
SCREEN menu
Item Description
MyScreen LockUsing the ▲/▼ cursor buttons turns on/off the MyScreen lock 
function.
ON 
 OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in the SECURITY menu (
61).
MESSAGEUsing the ▲/▼ cursor buttons turns on/off the message function.
ON 
 OFF
When the ON is selected, the following message function works.
“AUTO IN...

44
SCREEN menu
Item Description
SOURCE NAMEEach input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ cursor buttons on the SCREEN menu to select the 
SOURCE NAME and press the ► cursor (or the ENTER) button.  
The SOURCE NAME menu will be displayed.
(2)  Use the ▲/▼ cursor buttons on the 
SOURCE NAME menu to select the port 
to be named and press the ► cursor 
button. Right side of the menu is blank 
until a name is specified. 
The SOURCE NAME dialog will be 
displayed.
(3)  The...

45
SCREEN menu
Item Description
TEMPLATEUsing the ▲/▼ cursor buttons switches the mode for the template 
screen. 
Press the ► cursor (or the ENTER) button to display the selected 
template, and press the ◄ cursor button to close the displayed 
screen.
The last selected template is displayed when the MY BUTTON 
allocated to the TEMPLATE function is pressed (
49).
TEST PATTERN  DOT-LINE1  DOT-LINE2  DOT-LINE3
     
	                                                                              
	
  MAP2...

46
SCREEN menu
Item Description
C.C.
(Closed Caption)The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select the Closed Caption DISPLAY setting...

47
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, 
and press the ► cursor (or the ENTER) button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table.
Item Description
AUTO SEARCHUsing the ▲/▼ cursor buttons turns on/off the automatic signal 
search function.
ON 
 OFF
When the ON is selected, detecting no signal automatically cycles 
through...

48
OPTION menu
Item Description
AUTO
POWER OFF
Using the ▲/▼ cursor buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
 Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote control...

49
OPTION menu
Item Description
MY BUTTONThis item is to assign one of the following functions to the MY 
BUTTON 1/2 on the remote control (
7).
(1)  Use the ▲/▼ cursor buttons on the MY BUTTON menu to select 
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) 
button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► cursor buttons sets one of the 
following functions to the chosen button. Press the ENTER (or 
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to...

50
OPTION menu
Item Description
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor (or the 
ENTER) button on the remote control 
to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the 
cooling fans. The HIGH is the mode for use at highlands etc. Note 
that the projector is noisier when the HIGH is selected.
HIGH 
 NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the mode. When...