Dukane Imagepro 8112 Projector Users Manual

21
Operating
Adjusting the projector's elevator
When the place to put the projector is slightly uneven to the left or right, use the 
elevator feet to place the projector horizontally. 
Using the feet can also tilt the projector in order to project 
at a suitable angle to the screen, elevating the front side of 
the projector within 3
degrees.
This projector has 2 elevator feet and 2 elevator buttons. An elevator foot is 
adjustable while pushing the elevator button on the same side as it.
1.Holding...

22
Operating
1.Press the POSITION button on the remote control while no 
menu is on screen, to display the D-SHIFT (
38) dialog on 
screen.
Adjusting the position
2.Use the ▲, ▼, ◄ and ► buttons to adjust the picture position.
Press the POSITION button again to finish this operation.
●  This is a function to shift the position of the shrunken picture by the D-ZOOM  
(
38) function.
●  When an OSD (On Screen Display) menu is displayed, this operation moves 
the position of the OSD menu, but the picture...

23
Operating
• The MAGNIFY dialog will automatically disappear in several seconds with 
no operation. The dialog will appear again if the MAGNIFY ON button is pressed 
when the dialog has automatically disappeared.
• While the MAGNIFY dialog is displayed, press the MAGNIFY ON button to switch 
the dialog between magnifying area shifting (with the triangles) and magnification 
ratio adjustment (with the magnifying glass icon).
• The magnification is automatically disabled when the displaying signal or its...

24
Operating
1.Press the BLANK button on the remote control.  
The BLANK screen will be displayed instead of the screen of 
input signal. Please refer to the BLANK item in the SCREEN 
menu (
41).
To exit from the BLANK screen and return to the input signal 
screen, press the BLANK button again. 
Temporarily blanking the screen
●  The projector automatically exits from the BLANK mode when 
some control buttons are pressed.
• The sound is not connected with the BLANK screen function. If 
necessary, set...

25
POWERTEMPLAMP MENU INPUT
STANDBY/ON
Operating
1.To start the MENU, press the MENU button. The MENU you last used (EASY 
or ADVANCED) will appear. The EASY MENU has priority to appear just after 
powered on.
Using the menu function
2.(1)  Use the ▲/▼ cursor buttons to select an item to 
operate. If you want to change it to the ADVANCED 
MENU, select the ADVANCED MENU.
(2)  Use the ◄/► cursor buttons to operate the item. This projector has the following menus:  
PICTURE, IMAGE, INPUT, SETUP, AUDIO,...

26
Operating
Using the menu function (continued)
3.To close the MENU, press the MENU button again or select the EXIT and 
press the ◄ cursor (or the ENTER) button. Even if you do not do anything, 
the dialog will automatically disappear after about 30 seconds.
●  If you want to move the menu position, use the cursor buttons after pressing the 
POSITION button.
●  Some functions cannot be performed when a certain input port is selected, or 
when a certain input signal is displayed.
●  When you want to...

27
EASY MENU
EASY MENU
From the EASY MENU, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then 
perform it according to the following table.
Item Description
ASPECT
Using the ◄/► cursor buttons switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu (
32).
• The on-screen menu might be displayed outside of the image 
display area depending on the adjustment value of the ASPECT, 
D-ZOOM and KEYSTONE. Changing the values of ASPECT, 
D-ZOOM...

28
EASY MENU
Item Description
ECO MODEUsing the ◄/► cursor buttons turns off/on the eco mode.
See the ECO MODE item in the SETUP menu (
38).
MIRRORUsing the ◄/► cursor buttons switches the mode for mirror status.
See the MIRROR item in the SETUP menu (
39).
RESETPerforming this item resets all of the EASY MENU items except the 
FILTER TIME and the LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ► 
cursor button performs resetting.
FILTER TIMEThe usage time of the air filter...

29
PICTURE menu
PICTURE menu
From the PICTURE menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
BRIGHTNESSUsing the 
◄/► cursor buttons adjusts the brightness.
Dark 
 Light
CONTRASTUsing the 
◄/► cursor buttons adjusts the contrast.
Weak 
 Strong
GAMMAUsing the ▲/▼ cursor buttons switches the gamma mode.
To adjust...

30
PICTURE menu
Item Description
COLOR TEMP
Using the ▲/▼ cursor buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a mode whose name 
includes the CUSTOM and then 
pressing the ► cursor (or the ENTER) 
button displays a dialog to aid you in 
adjusting the OFFSET and GAIN of the 
selected mode.
The OFFSET adjustments change the color intensity on the whole 
tones of the test pattern.
GAIN adjustments mainly affect color intensity on the brighter tones 
of the test pattern.
Choose an...