Dukane Imagepro 8112 Projector Users Manual

							41
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor (or the ENTER) button to execute 
the item. Then perform it according to the following 
table.
Item Description
LANGUAGEUsing the ▲/▼/◄/► cursor buttons switches the OSD (On Screen 
Display) language.
ENGLISH, FRANÇAIS, DEUTSCH, ESPAÑOL...  
(shown in the LANGUAGE dialog)
Press the ENTER (or the INPUT) button to save the language setting.
MENU POSITIONUsing the ▲/▼/◄/► cursor buttons adjusts the menu position.
To quit the operation, press the MENU button on the remote control 
or keep no operation for about 10 seconds.
BLANK
Using the ▲/▼ cursor buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature 
(24). It is displayed by pressing the BLANK button on the remote 
control.
MyScreen 
 ORIGINAL 
 BLUE 
 WHITE 
 BLACK
       
MyScreen :  Screen can be registered by the MyScreen item (42).ORIGINAL :  Screen preset as the standard screen.
BLUE, WHITE, BLACK :  Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or the 
ORIGINAL screen will change to the plain black screen after several 
minutes.
START UP
Using the ▲/▼ cursor buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected.
MyScreen 
 ORIGINAL 
 OFF
           
MyScreen :  The screen can be registered by the MyScreen item (42).ORIGINAL :  The screen preset as the standard screen.
OFF :  Plain black screen.
• To avoid remaining as an afterimage, the MyScreen or the 
ORIGINAL screen will change to the BLANK screen (
24) after 
several minutes. If also the BLANK screen is the MyScreen or the 
ORIGINAL, the plain black screen is instead used.
• When the ON is selected to the MyScreen PASSWORD item in the 
SECURITY menu (
61), the START UP is fixed to the MyScreen.
(continued on next page) 
						

							42
SCREEN menu
Item Description
MyScreenThis item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and the START UP 
screen. Display the image you want to capture before executing the 
following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen.
Please wait for the target image to be displayed, and press the 
ENTER (or the INPUT) button when the image is displayed. The 
image will freeze and the frame for capturing will appear. 
To stop performing, press the RESET (or press the ◄ cursor and 
the INPUT buttons at the same time) button. 
2.  Using the ▲/▼/◄/► cursor buttons 
adjusts the frame position. 
Please move the frame to the position 
of the image which you want to use. The 
frame may not be able to be moved for 
some input signals. 
To start registration, press the ENTER 
(or the INPUT) button on the remote 
control.
To restore the screen and return to the previous dialog, press 
the RESET (or press the ◄ cursor and the INPUT buttons at the 
same time) button. 
Registration takes several minutes. 
When the registration is completed, the registered screen and the 
following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed:
“A capturing error has occurred. Please try again.” 
• This function cannot be selected when the ON is selected to the 
MyScreen Lock item (
43).
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in the SECURITY menu (
61).
• This item cannot be selected for an HDMITM signal.
(continued on next page) 
						

							43
SCREEN menu
Item Description
MyScreen LockUsing the ▲/▼ cursor buttons turns on/off the MyScreen lock 
function.
ON 
 OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in the SECURITY menu (
61).
MESSAGEUsing the ▲/▼ cursor buttons turns on/off the message function.
ON 
 OFF
When the ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“INVALID SCAN FREQ.”
“NOT AVAILABLE”
“Searching….” while searching for the input
“Detecting….” while an input signal is detected
The indication of the input signal displayed by changing 
The indication of the aspect ratio displayed by changing
The indication of the PICTURE MODE displayed by changing
The indication of the MY MEMORY displayed by changing
The indication of “FREEZE” and “II” while freezing the screen by 
pressing the FREEZE button.
The indication of the TEMPLATE displayed by changing.
• When the OFF is selected, please remember if the picture is 
frozen. Do not mistake freezing for a malfunction (
24).
(continued on next page) 
						

							44
SCREEN menu
Item Description
SOURCE NAMEEach input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ cursor buttons on the SCREEN menu to select the 
SOURCE NAME and press the ► cursor (or the ENTER) button.  
The SOURCE NAME menu will be displayed.
(2)  Use the ▲/▼ cursor buttons on the 
SOURCE NAME menu to select the port 
to be named and press the ► cursor 
button. Right side of the menu is blank 
until a name is specified. 
The SOURCE NAME dialog will be 
displayed.
(3)  The current name will be displayed on 
the first line. Use the ▲/▼/◄/► cursor 
buttons and the ENTER (or the INPUT)
button to select and enter characters. 
To erase 1 character at one time, press 
the RESET (or press the ◄ cursor and 
the INPUT buttons at the same time) 
button. Also if you move the cursor to the 
DELETE or the ALL CLEAR on screen 
and press the ENTER (or the INPUT) 
button, 1 character or all characters 
will be erased. The name can be a 
maximum of 16 characters.
(4)  To change an already inserted character, press the ▲ cursor 
button to move the cursor to the first line, and use the ◄/► 
cursor buttons to move the cursor on the character to be 
changed. 
After pressing the ENTER (or the INPUT) button, the character 
is selected. Then, follow the same procedure as described at 
the item (3) above.
(5)  
To finish entering text, move the cursor to the OK on screen 
and press the ► cursor (or the ENTER / the INPUT) button. To 
revert to the previous name without saving changes, move the 
cursor to the CANCEL on screen and press the 
◄ cursor (or the 
ENTER / the INPUT) button.
(continued on next page) 
						

							45
SCREEN menu
Item Description
TEMPLATEUsing the ▲/▼ cursor buttons switches the mode for the template 
screen. 
Press the ► cursor (or the ENTER) button to display the selected 
template, and press the ◄ cursor button to close the displayed 
screen.
The last selected template is displayed when the MY BUTTON 
allocated to the TEMPLATE function is pressed (
49).
TEST PATTERN  DOT-LINE1  DOT-LINE2  DOT-LINE3
     
	                                                                              
	
  MAP2  MAP1  CIRCLE2  CIRCLE1  DOT-LINE4
You can turn a map upside down and scroll it horizontally when  MAP1 
or MAP2 is selected. To invert or scroll the map, display the guidance 
by pressing the RESET button on the remote three seconds or more 
when MAP1 or MAP2 appears.
While the guidance is displayed:
• Press the ▲ cursor button and then press the ENTER or INPUT 
button to place the Northern Hemisphere on the top.
• Press the ▼ cursor button and then press the ENTER or INPUT 
button to place the Southern Hemisphere on the top.
• Press the ◄/► cursor button and then press the ENTER or 
INPUT button to scroll the map horizontally.
(continued on next page) 
						

							46
SCREEN menu
Item Description
C.C.
(Closed Caption)The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select the Closed Caption DISPLAY setting from following options 
using the ▲/▼ cursor buttons.
AUTO 
 ON 
 OFF 
   
AUTO :  Closed Caption automatically displays when the volume 
is muted.
ON : The Closed Caption is on.
OFF : The Closed Caption is off.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, 
narration, and / or sound effects of a television program or other 
video sources. The Closed Caption availability is depending upon 
broadcaster and/or content.
MODE
Select the Closed Caption MODE setting from following options 
using the ▲/▼ cursor buttons.
CAPTIONS 
 TEXT
CAPTIONS : Display Closed Caption.
TEXT :  Display Text data, which is for additional information such 
as news reports or a TV program guide. The information 
covers the entire screen. Not all of the C.C. program has 
Text information.
CHANNEL
Select the Closed Caption CHANNEL from following options using 
the ▲/▼ cursor buttons.
1 
 2 
 3 
 4
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some 
channel might be used for secondary language or empty. 
						

							47
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, 
and press the ► cursor (or the ENTER) button to 
execute the item, except for the items LAMP TIME 
and FILTER TIME. Then perform it according to the 
following table.
Item Description
AUTO SEARCHUsing the ▲/▼ cursor buttons turns on/off the automatic signal 
search function.
ON 
 OFF
When the ON is selected, detecting no signal automatically cycles 
through input ports in the following order. The search is started from 
the current port. Then when an input is found, the projector will stop 
searching and display the image. 
  COMPUTER IN1 
 COMPUTER IN2 
 HDMI 
  VIDEO  
  S-VIDEO 
DIRECT
POWER ONUsing the ▲/▼ cursor buttons turns on/off the 
DIRECT POWER 
ON function.
ON 
 OFF
When set to the ON, the lamp in projector will be automatically 
turned on without the usual procedure (
17), only when the 
projector is supplied with the power after the power was cut while 
the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• 
After turning the lamp on by the DIRECT POWER ON function, 
if neither input nor operation is detected for about 30 minutes, the 
projector is turned off, even though the
 AUTO POWER OFF function 
(
48) is disabled.
(continued on next page) 
						

							48
OPTION menu
Item Description
AUTO
POWER OFF
Using the ▲/▼ cursor buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes) 
 Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector 
lamp will be turned off. 
If one of the projector's buttons or the remote control buttons 
is pressed or one of the commands (except get commands) is 
transmitted to the CONTROL port during the corresponding time, 
projector will not be turned off.
Please refer to the section the “Turning off the power”
 (17).
LAMP TIMEThe lamp time is the usage time of the lamp, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the ► cursor (or the ENTER / the RESET) button displays 
a dialog. 
To reset the lamp time, select the OK using the ► cursor button.
CANCEL
 
 OK
• Please reset the lamp time only when you have replaced the lamp, 
for a suitable indication about the lamp.
• For the lamp replacement, see the section the “Replacing the 
lamp” (
66, 67).
FILTER TIMEThe filter time is the usage time of the air filter, counted after the last 
resetting. It is shown in the OPTION menu.
Pressing the ► cursor (or the ENTER / the RESET) button displays 
a dialog. 
To reset the filter time, select the OK using the ► cursor button.
CANCEL
 
 OK
• 
Please reset the filter time only when you have cleaned or replaced 
the air filter, for a suitable indication about the air filter.
• For the air filter cleaning, see the section the “Cleaning and 
replacing the air filter” (
68).
(continued on next page) 
						

							49
OPTION menu
Item Description
MY BUTTONThis item is to assign one of the following functions to the MY 
BUTTON 1/2 on the remote control (
7).
(1)  Use the ▲/▼ cursor buttons on the MY BUTTON menu to select 
a MY BUTTON - (1/2) and press the ► cursor (or the ENTER) 
button to display the MY BUTTON setup dialog. 
(2)  Then using the ▲/▼/◄/► cursor buttons sets one of the 
following functions to the chosen button. Press the ENTER (or 
the INPUT) button to save the setting.
• COMPUTER IN1: Sets port to the COMPUTER IN1.
• COMPUTER IN2: Sets port to the COMPUTER IN2.
• HDMI: Sets port to HDMI.
• S-VIDEO: Sets port to the S-VIDEO.
• VIDEO: Sets port to the VIDEO.
• MY IMAGE: Displays the MY IMAGE menu (
58).
•  MESSENGER: Turns the messenger text displayed on the screen on/
off (Messenger Function of the User's Manual - Network Guide).When there is no transferred text data to display, the message 
”NO MESSENGER DATA" appears.
•  INFORMATION: Displays the SYSTEM_INFORMATION, INPUT_
INFORMATION (
54), NETWORK_INFORMATION(59) or nothing.
•  MY MEMORY: Loads one of adjustment data stored (31). 
When more than one data are saved, the adjustment  
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the 
dialog "No saved data" appears.
When the current adjustment is not 
saved to memory, the dialog as shown in 
the right appears.
If you want to keep the current adjustment, please press  
the ► cursor button to exit. Otherwise loading a data will overwrite 
the current adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (
27).
•  FILTER RESET: Displays the filter time reset confirmation dialogue 
(
48).
•  TEMPLATE: Makes the template pattern selected to the 
TEMPLATE item (
45) appear or disappear.
•  AV MUTE: Turns the picture and audio on/off.
•  D-ZOOM: Turns the D-ZOOM mode on/off. When the D-ZOOM 
mode is on, use the ▲/▼ cursor buttons to adjust the 
magnification ratio.
•  D-SHIFT: Turns the D-SHIFT mode on/off. When the D-SHIFT 
mode is on, use the ▲/▼/◄/► cursor buttons to move the 
magnifying area.
•  RESOLUTION: Turns the RESOLUTION menu on/off (
37).
MY SOURCEUsing the ▲/▼ cursor buttons selects the picture input port to be 
selected with pressing the MY SOURCE/DOC.CAMERA button on 
the remote control.
Select the picture input that is connected with a document camera.
  COMPUTER IN1 
 COMPUTER IN2 
   VIDEO    
    S-VIDEO    
    HDMI   
(continued on next page) 
						

							50
OPTION menu
Item Description
SERVICESelecting this item displays the SERVICE 
menu.
Select an item using the ▲/▼ cursor 
buttons, and press the ► cursor (or the 
ENTER) button on the remote control 
to execute the item.
FAN SPEED
Using the ▲/▼ cursor buttons switches the rotation speed of the 
cooling fans. The HIGH is the mode for use at highlands etc. Note 
that the projector is noisier when the HIGH is selected.
HIGH 
 NORMAL
AUTO ADJUST
Using the ▲/▼ cursor buttons to select one of the mode. When the 
DISABLE is selected, the automatic adjustment feature is disabled.
FINE 
 FAST 
 DISABLE
   
FINE: Finer tuning including the H.SIZE adjustment.
FAST:  Faster tuning, setting the H.SIZE to prearranged data for 
the input signal.
• Depending on conditions, such as input image, signal cable to 
the projector, environment around the projector, etc., the automatic 
adjustment may not work correctly.  In such a case, please choose 
the DISABLE to disable the automatic adjustment, and make 
adjustment manually.
GHOST
1.  Select a color element of ghost using 
the ◄/► cursor buttons. 
2.  Adjust the selected element using the 
▲/▼ cursor buttons to disappear ghost.
FILTER MESSAGE
Use the ▲/▼ cursor button to set the timer for notifying by the 
message when to replace the filter unit 
500h 
 1000h 
 2000h 
 3000h 
 4000h 
 5000h 
 OFF
After choosing an item except the OFF, the message the 
“REMINDER ***HRS PASSED .....” will appear after the timer 
reaches the interval time set by this feature (
72). 
When the OFF is chosen, the message will not appear. Utilize 
this feature to keep the air filter clean, setting the suitable time 
according to your environment of this projector.
• Please take care of the filter unit periodically, even if there is 
no message. If the air filter becomes to be blocked by dust or 
other matter, the internal temperature will rise, which could cause 
malfunction, or reduce the lifetime of the projector.
• Please be careful with the operating environment of the projector 
and the condition of the filter unit.
(continued on next page)