Digital Projection Titan Reference 1080p 3d, Dual 3d, Titan 1080p 3d, Dual 3d Ultra Contrast, Titan Dual Fastframe User Manual

							Rev C  April 2011 Page 7.5
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix
Electrical
Inputs RGB1, RGB2, DVI-Single, SDI, Composite Video, S-Video, Component 
DVI-Single/Dual/Twin
Pixel clock
  up to 165MHz
Control inputs 1 x 3D
  1 x LAN
 1 x wifi LAN
 1 x RS232 serial: 19200 baud, 8 bits, 1 stop bit, no parity
 1 x remote control
Indicators Input, 3D sync, Power, Shutter, Error, IR, Lamp 1, Lamp 2
Mains supply
Single  600W, 100-240VAC ±10%, 48-62Hz (single phase)
Dual 1000W, 100-240VAC ±10%, 48-62Hz (single phase)
International Regulations Meets FCC Class A  requirements 
Meets EMC Directives (EN 55022, EN 55024, EN 55103)  
Meets Low Voltage Directive (EN60950)
Physical
Operating Temperature 0 to 35°C
Storage Temperature  -10 to 50°C
Thermal Dissipation
Single  1770 BTU/hr
Dual 2777 BTU/hr
Operating Humidity 20%  to 80% non-condensing
Weight  approximately 31 kg (68 lbs)
FCC WIFI ID
R68WIPORT
 Specifications are subject to change without notice. 
						

							Page 7.6 Rev C  April 2011
7. Appendix Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
Lens Data
Optical 105-607 ~ 107-195105-608105-609109-236 ~ 109-359 105-610 ~ 107-196
throw ratio 0.67 : 1 fixed1.12 : 1 fixed1.12 : 1 fixed1.16 - 1.49 :1 zoom 1.39 - 1.87 : 1 zoom
full DMD image width 0.67 : 1
1.64 - 4.78m
(5.4 - 15.7ft)1.12 : 1 
2.68 - 13.39m
(8.8 - 43.9ft)1.12 : 1
1.07 - 1.79m
(3.5 - 5.9ft)1.16 : 1
2.59 - 12.93m
(8.5 - 42.4ft)
1.49 : 1
2.01 - 10.07m
(6.6 - 33ft) 1.39 : 1
2.88 - 17.27m
(9.4 - 56.7ft)
1.87 : 1
2.14 - 12.83m
(7 - 42.1ft)
throw distance 0.67 : 1
1.1 - 3.2m
(3.6 - 10.5ft)1.12 : 1 
3 - 15m
(9.8 - 49.2ft)1.12 : 1
1.2 - 2m
(3.9 - 6.6ft)1.16 : 1
3 - 15m
(9.8 - 49.2ft)
1.49 : 1
3 - 15m
(9.8 - 49.2ft) 1.39 : 1
4 - 24m
(13.1 - 78.7ft)
1.87 : 1
4 - 24m
(13.1 - 78.7ft)
lens shift vertical *
pixels (vs DMD height) ± 108
(±  0.1H)+ 756, - 540
(+ 0.7,  - 0.5H)+ 756, - 540
(+ 0.7,  - 0.5H)± 540
(±  0.5H) + 756, - 540
(+ 0.7,  - 0.5H)
lens shift horizontal *
pixels (vs DMD width) ± 192
(±  0.1W)± 345
(±  0.18W)± 345
(±  0.18W)± 345
(±  0.18W) ± 345
(±  0.18W)
Aperture F/2.5F/2.5F/2.5F/2.5 F/2.5
Max object field size 26.1mm
(1.03”)34.6mm
(1.36”)34.6mm
(1.36”)31.4 mm
(1.24”) 34.6 mm
(1.36”)
Effective focal length 14.6mm
(0.58”)23.55mm
(0.93”)23.55mm
(0.93”)24.18 - 31.06 mm
(0.95 - 1.22 in) 28.94 - 38.95mm
(1.14 - 1.53 in)
Distortion 88%
Mechanical
Lens extension** 
(±2%) 204 mm
(8.0 in)268 mm
(10.6 in)268 mm
(10.6 in)226 mm
(8.9 in) 194 mm
(7.6 in)
Length
361 mm
(14.2 in) 422 mm
(16.6 in)422 mm
(16.6 in)378 mm
(14.9 in) 345 mm
(13.6 in)
Maximum diameter 163
(6.4 in)169 mm
(6.7 in)169 mm
(6.7 in)139 mm
(5.5 in) 139 mm
(5.5 in)
Weight
±0.05 kg (±0.1lb) 5.40 kg
(11.9 lb)5.85 kg
(12.9 lb)5.85 kg
(12.9 lb)to be confirmed
6.10 kg
(13.4 lb)
lens extension, measured from 
front of corner post* Actual available lens shift is reduced when the lens is to be shifted 
in two directions combined (see  Shifting the image, in section 
2. Installation).
** Lens extension is the distance from the outer end of the lens to the 
front of the projector. It is important for calculating throw distance 
accurately (see  Useful lens calculations, in  section 2. Installation). 
						

							Rev C  April 2011 Page 7.7
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix
Optical105-611 ~ 107-197105-612 ~ 107-198105-613 ~ 107-199109-235 ~ 109-358
throw ratio 1.87 - 2.56 : 1 zoom2.56 - 4.16 : 1 zoom4.16 - 6.96 : 1 zoom6.92 - 10.36 : 1 zoom
full DMD image width 1.87 : 1
2.14 - 12.83m
(7 - 42.1ft)
2.56 : 1
1.56 - 9.38m
(5.1 - 30.8ft)2.56 : 1
3.55 - 17.58m
(11.6 - 57.7ft)
4.16 : 1
2.19 - 10.82m
(7.2 - 35.5ft)4.16 : 1
2.88 - 19.23m
(9.4 - 63.1ft)
6.96 : 1
1.72 - 11.49m
(5.6 - 37.7ft)6.92 : 1
1.73 - 11.56m
(5.7 - 37.9ft)
10.36 : 1
1.16 - 7.72m
(3.8 - 25.3ft)
throw distance 1.87 : 1
4 - 24m
(13.1 - 78.7ft)
2.56 : 1
4 - 24m
(13.1 - 78.7ft))2.56 : 1
9.1 - 45m
(29.9 - 147.6ft)
4.16 : 1
9.1 - 45m
(29.9 - 147.6ft)4.16 : 1
12 - 80m
(39.4 - 262.5ft)
6.96 : 1
12 - 80m
(39.4 - 262.5ft)6.92 : 1
12 - 80m
(39.4 - 262.5ft)
10.36 : 1
12 - 80m
(39.4 - 262.5ft)
lens shift vertical *
pixels (vs DMD height) + 756, - 540
(+ 0.7,  - 0.5H)+ 756, - 540
(+ 0.7,  - 0.5H)+ 756, - 540
(+ 0.7,  - 0.5H)+ 756, - 540
(+ 0.7,  - 0.5H)
lens shift horizontal *
pixels (vs DMD width) ± 345
(±  0.18W)± 345
(±  0.18W)± 345
(±  0.18W)± 345
(±  0.18W)
Aperture F/2.5F/2.5F/2.5F/2.5
Max object field size 34.6 mm
(1.36”)34.6 mm
(1.36”)34.6 mm
(1.36”)34.6 mm
(1.36”)
Effective focal length 39.0 - 53.43mm
(1.54 - 2.1 in)52.4 - 85.3mm
(2.06 - 3.36 in)84.86 - 142.03mm
(3.34 - 5.59 in)141.2 - 211.4
(5.56 - 8.32 in)
Distortion 88%
Mechanical
Lens extension**
(±2%) 159 mm
(6.3 in)145 mm
(5.7 in)129 mm
(5.1 in)179 mm
(7.0 in)
Length 311 mm
(12.2 in)304 mm
(12.0 in)271 mm
(10.7 in)340 mm
(13.4 in)
Maximum diameter
139 mm
(5.5 in) 139 mm
(5.5 in)139 mm
(5.5 in)139 mm
(5.5 in)
Weight 5.15 kg
(11.3 lb)5.25 kg
(11.6 lb)4.70 kg
(10.3 lb)to be confirmed
* 
Actual available lens shift is reduced when the lens is to be shifted 
in two directions combined (see  Shifting the image, in section 
2. Installation).
** Lens extension is the distance from the outer end of the lens to the 
front of the projector. It is important for calculating throw distance 
accurately (see  Useful lens calculations, in  section 2. Installation).
lens extension, measured from 
front of corner post 
						

							Page 7.8 Rev C  April 2011
7. Appendix Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
Dimensions
All dimensions in [inches]  and mm 
unless otherwise stated 
						

							Rev C  April 2011 Page 7.9
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix
Rev C  April 2011  Page 7.9
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix
 For important information about how Input 8 is used, see INPUT 8 in the Notes column, and also Section 4, Overview .
Input modes supported by inputs 1-7
Signal ResolutionRefresh 
Rate 
( Hz ) Total 
number  of lines Horizontal 
 
Frequency  (kHz)
COMPOSITE
S-VIDEO
COMPONENT RGB1 
RGB2DVI
SDI 
**
SDTV 480i 720 x 480 60525 15.73üüü ü
576i720 x 576 50625 15.63üüü ü
HDTV 480p 720 x 480 60525 31.51üü
576p 720 x 576 50625 31.25üü
720p50 1280 x 720 50750 37.51üüü
720p60 1280 x 720 60750 45.00üüü
1080psf24 1920 x 1080 481125 27.00üüü
1080p24 1920 x 1080 241125 27.00üüü
1080i50 1920 x 1080 501125 28.13üüü
1080p25 1920 x 1080 251125 28.13üüü
1080i60 1920 x 1080 601125 33.75üüü
1080p30 1920 x 1080 301125 33.75üüü
1080p50 1920 x 1080 501125 56.24ü *ü *
1080p60 1920 x 1080 60112567.48ü *ü *
COMPUTER 480p 640 x 480 60525 31.51üü
VGA72 640 x 480 72520 37.86üü
VGA75 640 x 480 75500 37.51üü
VGA85 640 x 480 85509 43.27üü
WVGA60 848 x 480 60517 31.02üü
SVGA56 800 x 600 56625 35.16üü
SVGA60 800 x 600 60628 37.89üü
SVGA72 800 x 600 72666 48.08üü
SVGA75 800 x 600 75625 46.88üü
SVGA85 800 x 600 85631 53.68üü
XGA60 1024 x 768 60806 48.38üü
XGA70 1024 x 768 70806 56.50üü
XGA75 1024 x 768 75800 60.02üü
XGA85 1024 x 768 85808 68.68üü
XGA+75 1152 x 864 75900 67.52üü
WXGA60 1280 x 768 60798 47.78üü
WXGA60 1280 x 800 60831 49.70üü
WXGA60 1280 x 960 60831 49.70üü
WXGA60 1360 x 76860798 47.72üü
WXGA+60 1440 x 900 60934 55.94üü
SXGA-60 1280 x 960 601000 60.02üü
SXGA-85 1280 x 960 851011 85.98üü
SXGA60 1280 x 1024 601066 64.02üü
SXGA75 1280 x 1024 751072 80.32üü
SXGA85 1280 x 1024 851072 91.16üü
SXGA+60 1400 x 1050 601089 65.32üü
SXGA+75 1400 x 1050 751099 82.30üü
SXGA+85 1400 x 1050 851105 93.90üü
UXGA60 1600 x 1200 60125 75.02üü
VESA1080p 1920 x 1080 601120 67.16ü *ü *
*
 RGB colourspace only
 
** SDI not present on earlier models 
						

							Page 7.10 Rev C  April 2011
7. Appendix Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
Notes
 To select the sync format for 
RGB signals, see Setup Menu, 
in 4.Controlling the Projector.
Input connections
1. RGB1 input
5 x 75 ohm BNC
Used for computer, progressive video and analog HD video.
RGsB    RGBS   RGBHV   YPrPb
R     R   R   Pr/Cr
G + Sync G   G   Y
B     B   B   Pb/Cb
     Sync   H Sync
          V Sync
2. RGB2 input
15 way D-type connector
1 R
2 G
3 B
4 unused 
5 Digital Ground (H Sync)
6 R Ground
7 B Ground
8 G Ground
9 +5v
10 Digital Ground (V Sync/DDC)
11 unused
12 SDA
13 H Sync
14 V Sync
15 SCL
pin view of female connector 
						

							Rev C  April 2011 Page 7.11
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix
3. DVI-D Single input
24 way D-type connector
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2 Shield
4 unused
5 unused
6 DDC Clock
7 DDC Data
8 unused
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1 Shield
12 unused
13 unused
14 +5 V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0 Shield
20 unused
21 unused
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
* Hot plug detect (HPD) is fully DVI compliant.  DVI sources detect the presence 
of a display device by providing +5V on pin 14 and looking for +5V on pin 16. 
Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be 
held at +5V.
EDID is available even when the projector is switched off.
Operational means that the projector is powered up.  Non operational states are 
powered down and some self test and reprogramming modes.
High Definition Content Protection (HDCP) is supported on this input.
Notes
pin view of female connector 
						

							Page 7.12 Rev C  April 2011
7. Appendix Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
4. SDI input
1 x 75 ohm BNC
SMPTE 292 / HD-SDI signals are very high speed digital signals which require 
better quality coaxial cable than conventional analogue video. The data rate is 1.5 
Gigabits per second.
In choosing cable length and connectors for any installation the frequency response 
loss in decibels should be proportional to 1Öf, from 1MHz, to 1.5GHz. The following 
or similar cable specification should be used to ensure fault free communication 
between source and projector:
Belden 8281 cable or equivalent
5. Composite video input
1 x 75 ohm BNC
PAL or NTSC video
6. S-Video input
4 pin mini-DIN
1 Y Ground
2 C Ground
3 Luminance (Y)
4 Chrominance (C)
7. Component video input
4 x 75 ohm BNC
Used for standard definition interlaced signals only
RGsB    RGBS   YPrPb
R     R   Pr/Cr
G + Sync G   Y + Sync
B     B   Pb/Cb
     Sync
Notes
 To select the sync format for 
RGB signals, see Setup Menu, 
in 4.Controlling the Projector.
  To select between RGB and 
YPrPb signals, see Colour 
Menu, in 4.Controlling the 
Projector.
pin view of female connector 
						

							Rev C  April 2011 Page 7.13
Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual 7. Appendix
8. DVI-D Single/Dual/Twin input
24 way D-type connector
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2/4 Shield
4 TMDS Data 4-
5 TMDS Data 4+
6 DDC Clock
7 DDC Data
8 unused
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1/3 Shield
12 TMDS Data 3-
13 TMDS Data 3+
14 +5 V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0/5 Shield
20 TMDS Data 5 -
21 TMDS Data 5+
22 TMDS Clock Shield
23 TMDS Clock+
23 TMDS Clock-
* Hot plug detect (HPD) is fully DVI compliant.  DVI sources detect the presence 
of a display device by providing +5V on pin 14 and looking for +5V on pin 16. 
Whenever the projector is operational, and 5V is present on pin 14, pin 16 will be 
held at +5V.
EDID is available even when the projector is switched off.
Operational means that the projector is powered up.  Non operational states are 
powered down and some self test and reprogramming modes.
High Definition Content Protection (HDCP) is supported on this input.
Notes
 For important information about 
how Input 8 is used, see INPUT 
8 in the Notes column, and also 
Section 4, Overview.
  Input 8 may not be present on 
some models
pin view of female connector 
						

							Page 7.14 Rev C  April 2011
7. Appendix Digital Projection TITAN 1080p 3D, Dual 3D. Ultra Contrast User Manual
Control connections
Wired Remote control connection
3.5mm mini jack
Tip  Power
Ring Signal
Sleeve Ground
LAN connection
TCP Port number 
10001
Wireless 
802.11b/g 
10BaseT Unshielded Twisted Pair cable
The standard wire colours as as follows:
1  White / Orange stripe
2 Orange
3 White / Green stripe
4 Blue
5 White / Blue stripe
6 Green
7 White / Brown stripe
8 Brown
Crossed cable
(used to connect directly to a computer with no hub or network.)  
(Note that only the green and orange pairs are crossed)
1  White / Orange stripe    White / Green stripe 1
2 Orange      Green     2
3 White / Green stripe    White / Orange stripe 3
4 Blue        Blue     4
5 White / Blue stripe    White / Blue stripe 5
6 Green      Orange     6
7 White / Brown stripe    White / Brown stripe 7
8 Brown      Brown     8
Notes
 Note that plugging in the remote 
control cable will disable the 
infra-red.
 Use:
a straight cable to connect to a 
hub or network, or
a crossed cable as shown here 
to connect ONLY to a computer 
directly.
 Only one remote connection 
(RS232, LAN or Wireless LAN) 
should be used at any one time.
•
•
top view of cable connector
 
(clip is underneath)
Sleeve
Ring
Tip