Home > Digital Projection > Projector > Digital Projection Titan Pro Series III User Guides

Digital Projection Titan Pro Series III User Guides

Here you can view all the pages of manual Digital Projection Titan Pro Series III User Guides. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 21

Digital Projection Titan Pro series III  SUPPORTED SIGNAL INPUT MODES  Connection Guide
Page Conn_4Rev A   May 2012
NotesSupported Signal Input Modes
SignalResolutionRefresh Rate ( Hz )
Total number of lines
Horizontal  Frequency (kHz)
COMPOSITES-VIDEOCOMPONENT
VGA
DVI / HDMI
SDI
SDTV480i720 x 4806052515.73üüüü
576i720 x 5765062515.63üüüü
HDTV 480p720 x 4806052531.51üü
576p720 x 5765062531.25üü
720p501280 x 7205075037.51üüü
720p601280 x 7206075045.00üüü
1080psf241920 x 108048112527.00üüü
1080p241920 x...

Page 22

Digital Projection Titan Pro series III  CONTROL CONNECTIONS  Connection Guide
Page Conn_5Rev A   May 2012
Control Connections
Update Port
The Update Port is used to download via LAN, firmware updates issued fro\
m time to time 
by Digital Projection.
Ser vice Port
The Service Port is used to download via USB, firmware updates issued fr\
om time to 
time by Digital Projection.
Wired Remote Control
If infrared signals from the remote control cannot reach the projector d\
ue to excessive 
distance or...

Page 23

Digital Projection Titan Pro series III  WIRING DETAILS  Connection Guide
Page Conn_6Rev A   May 2012
Wiring Details
Signal inputs and outputs
Component input
4 x 75 ohm BNC
   RGsB   RGBS   YPrPb
Pb/B   B    B   Pb/Cb
Y/G   G + Sync  G   Y
Pr/R   R    R   Pr/Cr
SYNC        Sync
VGA input
15 way D-type connector
1 R
2 G
3 B
4 unused 
5 Digital Ground (H Sync)
6 R Ground
7 B Ground
8 G Ground
9 +5v
10 Digital Ground (V Sync/DDC)
11 unused
12 SDA
13 H Sync
14 V Sync
15 SCL
Notes
 For full details of all...

Page 24

Digital Projection Titan Pro series III  WIRING DETAILS  Connection Guide
Page Conn_7Rev A   May 2012
DVI-I input
24 way D-type connector
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2 Shield
4 unused
5 unused
6 DDC Clock
7 DDC Data
8 unused
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1 Shield
12 unused
13 unused
14 +5 V Power
15 Ground
16 Hot Plug Detect*
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0 Shield
20 unused
21 unused
22 TMDS Clock Shield
23 TMDS Clock+
24 TMDS Clock-
* Hot plug detect (HPD) is...

Page 25

Digital Projection Titan Pro series III  WIRING DETAILS  Connection Guide
Page Conn_8Rev A   May 2012
HDMI input
19 way type A connector
1 TMDS Data 2+
2 TMDS Data 2 Shield
3 TMDS Data 2-
4 TMDS Data 1+
5 TMDS Data 1 Shield
6 TMDS Data 1-
7 TMDS Data 0+
8 TMDS Data 0 Shield
9 TMDS Data 0-
10 TMDS Clock+
11 TMDS Clock Shield
12 TMDS Clock-
13 CEC
14 not connected
15 SCL (DDC Clock)
16 SCA (DDC Data)
17 DDC/CEC Ground
18 +5 V Power
19 Hot Plug Detect
SPDIF output
RCA Phono
Digital audio output from the...

Page 26

Digital Projection Titan Pro series III  WIRING DETAILS  Connection Guide
Page Conn_9Rev A   May 2012
S-Video input
4 pin mini-DIN
1 Y Ground
2 C Ground
3 Luminance (Y)
4 Chrominance (C)
3G-SDI
75 ohm BNC
SMPTE 292 / HD-SDI signals are very high speed digital signals which req\
uire better quality 
coaxial cable than conventional analogue video. The data rate is 1.5 Gigabits per second.
In choosing cable length and connectors for any installation the frequen\
cy response loss 
in decibels should be...

Page 27

Digital Projection Titan Pro series III  WIRING DETAILS  Connection Guide
Page Conn_10Rev A   May 2012
Control connections
Wired Remote control connection
3.5mm mini jack
Tip Power
Ring Signal
Sleeve Ground
Serial control input
1 unused
2 Received Data (RX)
3 Transmitted Data (TX)
4 unused
5 Signal Ground
6 unused
7 unused
8 unused
9 unused
Null-modem cable
(used to connect the projector to a computer)
RX 2 --- 3 TX
TX 3 --- 2 RX
GND 5 --- 5 GND
Serial port settings
Baud rate  9,600 bps
Data length 8...

Page 28

Digital Projection Titan Pro series III  WIRING DETAILS  Connection Guide
Page Conn_11Rev A   May 2012
LAN connection
TCP Port number 
10001
10BaseT Unshielded Twisted Pair cable
The standard wire colours as as follows:
1 White / Orange stripe
2 Orange
3 White / Green stripe
4 Blue
5 White / Blue stripe
6 Green
7 White / Brown stripe
8 Brown
Crossed cable
(used to connect directly to a computer with no hub or network.) 
(Note that only the green and orange pairs are crossed)
1 White / Orange stripe...

Page 29

Rev A   May 2012
Titan Pro series III
High Brightness Digital Video Projector
OPERATING GUIDE
BOOK CONTENTS
OPERATING GUIDE
Using the Remote Control and the 
Control Panel
Using the Menus
Menus and sub-menus
Drop-down lists
Sliders
Commands 

Page 30

Digital Projection Titan Pro series III  CONTENTS  Operating Guide
Rev A   May 2012
CONTENTS
Using the Remote Control and the Control Panel ..........Op_1
Using the Menus  ........................................................................\
............Op_2
Menus and sub-menus  ........................................................................\
..Op_2
Drop-down lists ........................................................................\
..............Op_2
Sliders...
Start reading Digital Projection Titan Pro Series III User Guides

Related Manuals for Digital Projection Titan Pro Series III User Guides

All Digital Projection manuals