Digital Projection Titan Pro Series III User Guides

Rev A   May 2012
USER GUIDES
INSTALLATION AND QUICK-START GUIDE 
CONNECTION GUIDE 
OPERATING GUIDE
112-884A
Titan Pro series III
High Brightness Digital Video Projector
BOOK CONTENTS
About these Guides
Symbols used in these guides
Warnings
Notes
Product revision 

Digital Projection Titan Pro series III  ABOUT THESE GUIDES
Rev A   May 2012
About these Guides
Please read this guide carefully before using the projector, and keep it handy for future reference.
A serial number is located on the back of the projector. Record it here: 
Symbols used in these guides
Warnings
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates that there is a danger of...

Rev A   May 2012
Titan Pro series III
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
BOOK CONTENTS
INSTALLATION AND QUICK-
START GUIDE
What’s in the Box?
Getting to Know the Projector
Front and rear views
Control panel
Remote control
Connection panel indicators 

Digital Projection Titan Pro series III  CONTENTS  Installation and Quick-Start Guide
Rev A   May 2012
CONTENTS
What’s in the Box? ........................................................................\
.......Inst_1
Getting to Know the Projector....................................................Inst_2
Front and rear views  ........................................................................\
.....Inst_2
Control panel  ........................................................................\...

Digital Projection Titan Pro series III  WHAT'S IN THE BOX?  Installation and Quick-Start Guide
Page Inst_1Rev A   May 2012
What’s in the Box?Notes
 Make sure your box contains 
everything listed. If any pieces are 
missing, contact your dealer.
 You should save the original box 
and packing materials, in case you 
ever need to ship your Projector.
 The projector is shipped without a 
lens.
 Only one power cable - dependent 
on the destination territory - will be 
supplied with the projector.
Remote...

Digital Projection Titan Pro series III  GETTING TO KNOW THE PROJECTOR  Installation and Quick-Start Guide
Page Inst_2Rev A   May 2012
Getting to Know the Projector
Front and rear views
Notes
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
Lens
Air outlet 
duct
Top  
air inlets
Side  
Connection 
panel
Mains 
input
Control 
panel
Adjustable 
feet
Front 
infra-red 
window
Rear  
infra-red window
Rear  
Connection panel
Bottom 
air inlets
Lens release 
lever...

Digital Projection Titan Pro series III  GETTING TO KNOW THE PROJECTOR  Installation and Quick-Start Guide
Page Inst_3Rev A   May 2012
Notes
 The projector uses the standard 
Digital Projection infra-red remote 
control.
  Only the controls shown highlighted 
are used on this projector.
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
 Each time a lens is fitted to 
the projector, the calibration 
procedure must be carried out.
  (see the Fitting the Lens)...

Digital Projection Titan Pro series III  GETTING TO KNOW THE PROJECTOR  Installation and Quick-Start Guide
Page Inst_4Rev A   May 2012
Connection panel indicators
The indicators on the rear connection panel are as follows:
All on = Power-On Self Test
Lamps 1,2 off = OFF
 green = ON (100%)   amber =  85-99% (on some models)
 flashing green  = WARM-UP    flashing amber  = COOL-DOWN
 red (projector in standby) = Lamp Comms Error (call service)
 red (projector on) = Ballast Comms Error (call service)...

Digital Projection Titan Pro series III  POSITIONING THE SCREEN AND PROJECTOR  Installation and Quick-Start Guide
Page Inst_5Rev A   May 2012
Notes
 Always allow the lamp to cool for 
5 minutes before:
  - disconnecting the power 
- moving the projector
 Ensure that there is at least 
30cm (12in) of space between the 
ventilation outlets and any wall, 
and 10cm (4in) on all other sides.
 Do not place the projector with its 
front panel down on a surface, as 
this may damage the lens or the 
lens release...

Digital Projection Titan Pro series III  POSITIONING THE SCREEN AND PROJECTOR  Installation and Quick-Start Guide
Page Inst_6Rev A   May 2012
Fitting and adjusting the optional Rigging Frame
Fitting
Remove the four adjustable feet.
Secure the rigging frame to the projector, as shown, making sure that the male frame 
couplings are at the top. Secure each adaptor plate to the projector (t\
hree screws), and 
secure each of the adjuster brackets to an adaptor plate (three screws)\
.
Stacking
The projectors...