Digital Projection Titan 1080p-500, 1080p-250 User Manual
Here you can view all the pages of manual Digital Projection Titan 1080p-500, 1080p-250 User Manual. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
July 2007 Page 4.25 Digital Projection TITAN 1080p-500, 1080p-250 User Manual 4. Controlling the projector Notes Horizontal and Vertical Aspect Ratio adjustments are available only when User is selected in Aspect Ratio, (see previous page). Keystone adjustment can be found in both the Geometry and Projector Setup menus. Phase adjustment can be found in both the Picture and Geometry menus, and is available for graphics based RGB sources only. Pixels adjustment is available for graphics...
Page 72
Page 4.26 July 2007 4. Controlling the projector Digital Projection TITAN 1080p-500, 1080p-250 User Manual Blanking Blanking curtains can be applied to each edge of the picture. Press and to select Blanking. Press to open the Blanking submenu. Blanking On/Off Press and to select from: On Off Blanking adjust Press and to select the edge to be Blanked. Press and to adjust the slider (0 to 200). • • • Notes Geometry Menu Blanking The blanking curtains will not applied until Blanking...
Page 73
July 2007 Page 4.27 Digital Projection TITAN 1080p-500, 1080p-250 User Manual 4. Controlling the projector Notes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Colour Menu Some menu items may be greyed out - unavailable due to the effect of settings made in other menus, or due to the type of input signal. Read these notes on Colour and Global Colourimetry before making any settings in the Colour menus. Colour menu To return to the main menu, press up to...
Page 74
Page 4.28 July 2007 4. Controlling the projector Digital Projection TITAN 1080p-500, 1080p-250 User Manual Notes Read the notes on Colour and Global Colourimetry earlier in this section before making any settings in the Colour menus. The Colour Temperature slider is available only if Temperature Mode is selected. The RGB Lift and Gain sliders are available only if User Mode is selected. The Component Type selection is available for RGB1, RGB2 and Component inputs only. Colour Mode Press...
Page 75
July 2007 Page 4.29 Digital Projection TITAN 1080p-500, 1080p-250 User Manual 4. Controlling the projector Notes The Trim submenu is available only if Global Colour Mode is selected. Colour Menu Trim Read the notes on Colour and Global Colourimetry earlier in this section before making any settings in the Colour menus. Trim Press and to select Trim. Press to open the Trim submenu. Trim RGB Lift and Gain Press and to select the parameter to be adjusted. Press and to adjust the...
Page 76
Page 4.30 July 2007 4. Controlling the projector Digital Projection TITAN 1080p-500, 1080p-250 User Manual Notes When using the menus, press OSD or to hide or reveal the On-Screen-Display. Setup Menu Setup menu To return to the main menu, press up to three times. From the main menu: Press and until Setup is highlighted. Press to open the Setup menu. The blue highlight moves to the fi rst item in the menu. •
Page 77
July 2007 Page 4.31 Digital Projection TITAN 1080p-500, 1080p-250 User Manual 4. Controlling the projector Projector Press and to select Projector. Press to open the Projector submenu. Orientation Press and to select Orientation. Press and to select from: Desktop Front Desktop Rear Ceiling Front Ceiling Rear Control Panel Backlight Press and to select Backlight. Press and to select from: On Off Component Video Sync Press and to select Component Video Sync. Press and to...
Page 78
Page 4.32 July 2007 4. Controlling the projector Digital Projection TITAN 1080p-500, 1080p-250 User Manual Keystone Used to correct for distortion caused by the projector being mounted higher or lower than the screen. Press and to select Keystone. Press and to adjust the slider (-128 to +127). Test Pattern Press and to select Test Pattern. Press to open the Test Pattern submenu. Press and to select from: Off Alignment Grid Screen Layout (shows outlines of various aspect ratios)...
Page 79
July 2007 Page 4.33 Digital Projection TITAN 1080p-500, 1080p-250 User Manual 4. Controlling the projector Notes Setup Menu Global Colourimetry Some menu items may be greyed out - unavailable due to the effect of settings made in other menus, or due to the type of input signal. Read these notes on Colour and Global Colourimetry before making any settings in the Colour menus. Global Colourimetry Press and to select Global Colourimetry. Press to open the Global Colourimetry submenu. • •...
Page 80
Page 4.34 July 2007 4. Controlling the projector Digital Projection TITAN 1080p-500, 1080p-250 User Manual Notes Read the notes on Colour and Global Colourimetry earlier in this section before making any settings in the Colour menus. The Colour Temperature slider is available only if Temperature Mode is selected. The RGB Lift and Gain sliders are available only if User Mode is selected. Colour Mode Press and to select Colour Mode. Press and to select from: Temperature User Peak...