Digital Projection Showlite 5000sx+ Lcd Projector Users Manual

8-7
Entering Alphanumeric Characters by Using the Menu
Alphabet or numeric characters are used for your IP address or
projector name. To enter IP Address or projector name, use the
software keyboard.
For using the software keyboard, see page 10-10.
Entering Alphanumeric Characters by Using the Remote
Control Numeric Buttons
Input alphanumeric characters by selecting one character at a
time with the numeric (Source/Input) buttons 1through 10(0) and
by moving the cursor with the SELECT  button. After...

8-8
Edit .............. Enables you to change source names or assign
the direct key.
Source Name
Enter a signal name. Up to 18 alphanumeric char-
acters can be used.
Input Terminal
Change the input terminal. RGB1 and RGB2 are
available for RGB signal; Video and S-Video are
available for composite signal.
Direct key
You can assign specific remote keys for direct
signal input selection.
Lock
Set so that the selected signal cannot be deleted
when All Delete is executed. The changes can-
not be saved.
Skip...

8-9
DigiView - SweetVision
The SweetVision feature provides improvement of contrast us-
ing a proprietary detail enhancement technology.
NOTE: This feature is not available for 480p, 576p and HDTV signals.
Off ............... Turns off the SweetVision feature
Low .............. Selects low level
Medium ....... Selects medium level
High ............. Selects high level
Split Mode
This feature turns on or off to show the effect of the Sweet Vision.
NOTE: When the projector is turned off, the Split Mode...

8-10
Selecting Gamma Correction Mode
Use the  or  buttons to choose one mode from three options.
Each mode is recommended for :
Dynamic ...... For true color reproduction of natural tones
Natural ......... Normal settings
Black Detail . For dark portions of a picture
Selecting Color Correction
Adjusts red, green, blue, yellow, magenta, cyan and color gain
each independently to correct the tint on whole screen.
Adjusting Color Temperature
This feature adjusts the color temperature using the slide bar....

8-11
Sync Protection
When a VCR, DVD, or some other equipment that suppor ts
Copyguard (a copy prevention system) is played back, the screen
may be displayed in a curved manner. Adjustments are made in
such circumstances. Use the SELECT  or  button to adjust
the VD level.
VD Delay
Adjustment:
This feature is used to correct vertical jitter of a signal.
NOTE: When connecting with a scan converter:
If an image from the scan converter is not correctly displayed, adjust to select the
best level point so...

8-12
Ref. Adjust
Using DigiScale - 3D Reform
This feature corrects trapezoidal distortion so that the projected
image is rectangular.
Two options are available for correcting procedures.
You can save adjustment settings by using the 3D Reform Save
option on Setup (See page 8-16).
Cornerstone
See page 3-4.
* When Resolution is set to Native, Cornerstone and Key-
stone are not available.
Keystone
1. Press the SELECT  or  button to adjust the horizontal keystone.
2. Press the SELECT 

 or  button to...

8-13
Reference Lens Memory [Ref. Lens Memmory]
This function serves to store the adjusted value common to all
input sources when using the Shift, Focus, and Zoom buttons of
the main unit or the remote control.
Set Reference Point ............. Stores the current adjusted val-
ues in memory as a reference.
Use Reference Point ............Applies the adjusted values
stored in Set Reference Point to
the current signal.
Return to Factory Default ..... Returns the adjusted values to
the factory default...

8-14
Selecting Menu Display Time
This option allows you to select how long the projector waits
after the last touch of a button to turn off the menu.
The preset choices are Manual, Auto 5 sec, Auto 15 sec,
and Auto 45 sec. The Auto 45 sec is the factory preset.
Manual ........ The menu can be turned off manually.
Auto 5 sec ... The menu will automatically be turned off in 5
seconds if no buttons are pressed within 5 sec-
onds.
Auto 15 sec . The menu will automatically be turned off in 15
seconds if no...

8-15
Setup
[Page 1]
Selecting Projector Orientation [Orientation]
This reorients your image for your type of projection. The op-
tions are: desktop front projection, ceiling rear projection, desk-
top rear projection, and ceiling front projection.
Selecting a Color or Logo for Background [Background]
Use this feature to display a blue/ black screen or logo when
no signal is available. The default background is Blue. You
can change the logo screen using the PC Card Files feature.
See pages 4-4.
Setting...

8-16
Selecting Operation Mode [Operation Mode Select]
Set the operation mode of the USB mouse connected to the
USB port (MOUSE/HUB) on the projector
Auto ............. Depending on connection of the USB port (PC)
on the projector and a USB port (type A) on your
PC, the USB mouse is operated in the following
way:
*When connecting the projector to your PC
The USB mouse connected to the projector
can be used as a PC mouse.
*When not connecting the projector to your PC
The USB mouse connected to the...